• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.991-997
• /
• 2003

A flow field around a disc in an optical disc drive is invested using numerical methods. The high-speed rotating disc induces a strong flow field around the disc, which causes the pressure distribution on the surfaces of the disc. The pressure difference between the upper and the lower surfaces causes the deformation of the disc. In the first part of this study, flow fields around a rotating disc and a stationary wall are investigated using a similarity solution method, in order to identify the effect of the distance between the disc and the wall on the pressure distribution on the surfaces of the disc. In the second part, flow field in a slim-type optical disc drive is studied using a commercial code in order to consider the effect of the vortices generated by the local geometry of the drive.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.234-238
• /
• 2006

In this research, an analysis of damaged instance and forming fault for disc part in automotive steel wheel was performed. Rolled steel material, which had been used in the manufacturing of the damaged disc part, was prepared for tensile test, quantitative analysis of chemical component and acquirement of scanning electron microscope images. Although the results of mechanical properties and chemical component ratio for the material satisfied the suggested specification, some material inherent problem was found in the scanning electron microscope images. Finally, in an analysis of chemical component for the damaged disc part used in road condition, mismatching of chemical component ratio between the suggested specification and test result was found.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.351-355
• /
• 1996

In optical disc system, lens actuator of 4-wire has unwanted moment which occurs tilt. The moment around the axis pallet to the tangential direction of the disk occurs to the moving part. when the moving part is moved in tracking direction and focus driving force is applied. This paper analyzed coupled effect due to the moment based on structural analysis and magnetic field analysis, both using finite element method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.320-325
• /
• 2006

The phenomenon of squeal in disc brakes has been, and stin is, a problem for the automotive industry. Extensive research has been done in an attempt to understand the mechanisms that cause it and in developing design procedures to reduce it to make vehicles more comfortable. In this paper, the study on squeal noise of disc brake is performed using complex eigen-value analysis, The first part describes the chassis-dynamometer and the testing procedure, and second part explains how the analysis is performed and shows some of the results from typical squeal tests. Finally, to reduce squeal nose of disc brake is investigated by the effects of brake design parameter.

• Carbon letters
• /
• 제8권1호
• /
• pp.25-29
• /
• 2007

The carbon brake discs were manufactured by densification the carbon fiber preform using PG-CVI technology with Propene as a carbon precursor gas and Nitrogen as a carrier gas. The densities of carbon brake discs were tested at different densification time. The results indicate that the densification rate is more rapid before 100 hrs than after 200 hrs. The CTscanning image and the SEM technology were used to observe the inner subtle structure. CT-images show the density distribution in the carbon brake disc clearly. The carbon brake disk made by PG-CVI is not very uniform. There is a density gradient in the bulk. The high-density part in the carbon brake is really located in the friction surface, especially in the part of inner circle. This density distribution is most suitable for the stator disc.

• Journal of Oral Medicine and Pain
• /
• 제23권3호
• /
• pp.277-280
• /
• 1998

The treatment of anterior disc displacement without reduction patients needs speicific treatment methods different from other Craniomandibular Disorders. Those are manual manipulation, anterior repositioning splint; ARS and step-back. It is well known that the use of Anterior Repositioning Splint is effective on relief of TMJ symptom. But the side effect of long- term ARS wearing, which is irreversible posterior open bite induction, has made many clinicians avoid ARS treatment. This report introduces a clinical case recently proven part- time wearing ARS method for treatment of Disc Displacement without reduction patient' that can reduce side effects with good efficacy. But now clinical statistical studies and basical histophysiological studies are more needed.

• The Journal of Korean Physical Therapy
• /
• 제15권2호
• /
• pp.52-66
• /
• 2003

The intervertebral disc is a cartilaginous structure that resembles articular cartilage in its biochemistry, but morphologically it is clearly different. It shows degenerative and ageing changes earlier than does any other connective tissue in the body, It is believed to be important clinically because there is an association of disc degeneration with back pain. Degenerative changes in the intervertebral disc are thought to develop as aging, mechanical stress and metabolic factors. Genetic factors may also play a part in the onset or progress of the degenerative process. They, together with environmental factors, may act as determinants of the structural characteristics of the intervertebral disc and produce a tendency to generation, In this short review we outline the morphplogy and biochemistry of normal intervertebral disc and the changes that arise during degeneration. Therefore this study will review degeneration of intervertebral disc, so we will have knowledge about low back pain associated with degenerative change in the intervertebral disc.

• 한국소음진동공학회논문집
• /
• 제26권6_spc호
• /
• pp.680-686
• /
• 2016

In an optical disc archive system, disc insertion process is an important part. Furthermore, dynamic analysis with the contact area between multi-bent leaf spring and a disc should be considered because the contact area is moved when the disc is inserted into the cartridge. In this paper, a finite element model of disc insertion was constructed based on dynamic characteristics, vertical stiffness, and dynamic response. The disc insertion model was validated with the experimental results. To identify the dynamic response of the disc induced by the changed contact area, applied force to the disc and the stiffness of the multi-bent leaf spring were analyzed. As the results, the factors which cause the failure of the disc insertion were investigated.

• Journal of Acupuncture Research
• /
• 제26권5호
• /
• pp.171-181
• /
• 2009

Objectives : A ruptured disc is a condition in which part or all of the nucleus pulposus is forced through a weakened part of the disc, resulting in back pain and leg pain caused by nerve root irritation. In this report, we investigated the effect of oriental medicine treatment in parallel with sling exercise therapy on ruptured intervertebral lumbar disc patients. Methods : The patients who have ruptured disc were treated by oriental medicine treatment in parallel with sling exercise therapy. The patients' symptoms were assessed by visual analogue scale(VAS) and revised oswestry disability questionnaire(RODQ) every week. Results : In all cases, chief complain such as lumbago, radicular pain and paresthesia were improved after above treatment. VAS score and RODQ score of all cases were decreased. Conclusions : There were usually thought to need operation in ruptured disc. But conservative treatment such as oriental medicine treatment in parallel with sling exercise therapy is helpful to improve the symptoms of the ruptured intervertebral lumbar disc except the emergency state.

• Tribology and Lubricants
• /
• 제28권5호
• /
• pp.246-251
• /
• 2012

Disc brakes and brake linings are part of the braking system in automobiles; this system works due to the braking power between the disc and pad. Vehicle braking systems have complex environments due to the geometry of the disk and pad, the material properties, the braking conditions, etc. Braking energy is converted into thermal energy during the braking process, due to the frictional heat between the disc brake and pad. This heat is changed to a heat flux, which affects the thermal stress of the disc. The purpose of this study was to use the fluid dynamics software ANSYS CFX to investigate the inner flow characteristics of the air and the heat transfer of the disc, and to analyze the effects on the thermal stress of the disc brake.