• 한국유체기계학회 논문집
• /
• 제8권6호
• /
• pp.15-25
• /
• 2005

Check valves playa vital role in the operation and protection of nuclear power plants. Check valves failure in nuclear power plants often lead to a plant transient or trip. The analysis of historical failure data gives information on the populations of various types of check valves, the systems they are installed in, failure modes, effects, methods of detection, and the mechanisms of the failures. A majority of check valve failures are caused by improper application. The experimental apparatus is designed and installed to measure the disc positions with flow velocity, Vopen and Vmin for 3 inch and 6 inch swing check valves. The minimum flow velocity necessary to just open the disc at a full open position is referred to as Vopen, and Vmin is defined as the minimum velocity to fully open the disc and hold it without motion. In the experiments, Vmin is determined as the minimum flow velocity at which the back stop load begins to increase after the disc is fully opened or the oscillation level of disc is reduced below $1^{\circ}$. The results show that the Vmin velocities for 3 inch and 6 inch swing check valves are about 27.3% and 17.5% higher than the Vopen velocities, respectively.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.249-270
• /
• 1993

For understanding of anatomy, physiology, and diseases of human TMJ, it is required to evaluate quantitatively the movement of the disc and condyle head of mandible. The histologic section of cadaver TMJ were examined, and the magnification of the MR image and its details of anatomy were evaluated. And then a quantitative analytic method, by comparing the Sectograph and the MR image of vital human TMJ, was proposed. For this study, 15 subjects(Male, 24~35years) were selected from a prosthodontic examination randomly, and each subject’s five interocclusal rubber registration records were made on the ICP, and 5, 10, 15, and 20mmjaw opening positions. All subjects were radiographed with a Denar Quint Sectograph Image System(Denar Corp., USA), and imaged with a MRP-20EX MR Image System(0.2T, Permanent Magnet Type, Hitachi Medical Corp., Japan) using an 100mm diameter bilateral type surface coil. These images were traced on the acetate tracing paper, and analyzed In this study, the findings led to the following conclusions. 1. In comparison of the histologic section of autopsy specimen with the MR image at the same section, the size(dimension) of MR image was 70% of the real one. It was possible to recognize the shape of articular disc, anterior and posterior attachments, and adjacent soft tissues, because of the excellent reproducibility of anatomical structure. 2. When we compared the amount of joint space on MR image with that of joint space on sectograph, the amount of joint space on sectograph was significantly greater than that of joint space on MR image, except at the top of condylar head. 3. The position of minimum joint space on sectograph at intercuspal position didn't coincide with the middle position of articular disc on MR image, and was approximately in the anterior third of posterior band of articular disc. 4. The amount of condylar movement on MR image at opening movement was greater than that of articular disc movement. From Intercuspal position to 5mm jaw-opening movement, the condylar movement showed hinge one, and over the range 5mm jaw-opening it suggested hinge & translatory one. 5. In terms of area variation of articular disc measured on MR image in sagittal plane, the area of posterior band increased with increasing the amount of Jaw opening, but the area of anterior band decreased conversely.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권3호
• /
• pp.125-132
• /
• 2015

Objectives: The purpose of this study was to clarify which findings in magnetic resonance imaging (MRI) are good predicators of pain and mouth opening limitation in patients with temporomandibular joint (TMJ) internal derangement (ID). Materials and Methods: Clinical examinations for pain and mouth opening limitation were conducted for suspected TMJ ID. MRI scans were taken within a week of clinical examinations. On the oblique-sagittal plane image, readings were obtained in terms of the functional aspect of disc position, degree of displacement, disc deformity, joint effusion, and osteoarthrosis. Multiple logistic regression analyses were conducted to identify the predictors of pain and mouth opening limitation. Results: A total of 48 patients (96 TMJs) were studied, including 39 female patients and 9 male patients whose ages ranged from 10 to 65 years. The resultant data showed significant correlations between pain and the MR imaging of the degree of disc displacement (P<0.05). The probability of there being pain in moderate to significant cases was 9.69 times higher than in normal cases. No significant correlation was found between mouth opening limitation and MRI findings. Conclusion: We identified a significant correlation between clinical symptoms and MRI findings of ID. The degree of anterior disc displacement may be useful for predicting pain in patients with TMJ ID.

• 에너지공학
• /
• 제29권3호
• /
• pp.25-33
• /
• 2020

본 연구에서는 유동해석 및 구조해석을 수행하여 위상최적화에 의해 설계된 버터플라이 밸브 디스크의 구조적 안전성을 살펴보았다. 유동해석을 수행하여 유량계수의 변화와 공동현상을 예측하였으며, 구조해석 후 강도 및 강성의 유효성을 확인하였다. 유동해석 후 열림각이 커질수록 유량계수가 비선형적으로 증가하다가 완만한 경사를 보였고, 열림각이 12o 일 때 공동화 현상을 예측할 수 있었다. 구조해석 후 경량 디스크의 유효응력이 재료의 항복강도보다 작았으며, 최대변형량도 선행연구의 보수적 변형량보다 작았다. 궁극적으로 전산해석에 기초한 경량 밸브 디스크의 구조적 안전성이 유효함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.881-886
• /
• 2003

In spite of its simple design, structure and operating mechanism, swing check valves are one of the critical components which adversely affect the safety of the nuclear power plants if they fail to function properly. Therefore, it is important to evaluate the performance condition of the swing check valves in safety-related systems. The performance characteristics of swing check valves include opening characteristics, the minimum required flow velocity, the pressure drop at design flow, the disc stability, and the effect of the upstream disturbances. Among factors to identify the performance of a swing check valve, a method to evaluate the opening characteristics and the minimum required flow velocity, which guarantees to fully open the disc and hold the disc without motion, are presented to determine the operating region of the swing check valve, such as stable, tapping, or oscillation. Based on the determined operating region and opening characteristics, the simple methods of wear and fatigue analyses of the specific parts of the valve are also described.

• Imaging Science in Dentistry
• /
• 제52권4호
• /
• pp.409-413
• /
• 2022

This report presents a rare case where a displaced temporomandibular joint (TMJ) disc was reduced to its normal position after orthognathic surgery, and long-term magnetic resonance imaging (MRI) follow-up visualized these postoperative changes. A 22-year-old male patient presented for facial asymmetry. He also complained of pain in the right TMJ area, and MRI showed disc displacements in both TMJs. After orthognathic surgery for facial asymmetry correction, the TMJ was re-evaluated. The symptom had resolved and the disc was positioned within the normal range during mouth opening. However, 6 and a half years after surgery, he complained of recurrent pain in the right joint, and MRI revealed medial disc displacement in the right TMJ. In conclusion, the influence of orthognathic surgery on the disc position might continue for a long time until the TMJ adapts to the new position. Careful and long-term follow-up is suggested to assess the TMJ complex.

• Journal of Oral Medicine and Pain
• /
• 제37권4호
• /
• pp.205-211
• /
• 2012

35세 여자환자가 갑작스런 개구장애와 함께 발생한 급성 교합변화를 주소로 내원하였다. 환자는 이전 수년 동안의 관절잡음의 병력을 가지고 있었으며 관절잡음의 소실과 동시에 개구제한이 발생하였음을 보고하였다. 환자는 개구제한과 함께 개구시 우측 악관절의 통증을 호소하였으며 구강내 교합 검사 시 전치부의 개교합과 함께 하악이 우측으로 전위된 양상이 관찰되었다. 또한 좌측으로의 측방운동량 또한 감소된 것으로 관찰되었다. 자기공명영상에서 우측 악관절에서 비정복성 관절 원판 전방 변위가 관찰되었으며 후방 관절강의 협착이 관찰되었다. 이 환자는 우측 악관절의 비정복성 관절원판 전방변위로 진단되었으며, 급성 교합변화는 변위된 관절원판에 의해 야기된 과두위치의 변화로 초래된 것으로 추정하였다. 처음 3개월간의 물리치료와 약물치료와 병행된 안정교합장치요법에서는 만족할 만한 치료결과를 얻지 못하였으나, 그 다음 약 8개월간 사용된 악간견인장치 치료를 통해서 통증 및 교합변화가 해소되었으며 정상적인 개구량으로 회복되었다. 술후 촬영된 자기공명영상에서 우측 과두가 재형성된 양상을 관찰할 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.44.1-44.7
• /
• 2019

Background: We evaluated the improvement of pain and the increase in mouth opening after temporomandibular joint arthrocentesis and the possible association with various factors such as previous splint treatment, medication, and diagnosis. Results: We studied 57 temporomandibular joint disorder patients who underwent arthrocentesis at Korea University Anam Hospital. These patients (24 males and 33 females, aged between 15 and 76 years) underwent arthrocentesis that was performed by one surgeon. The degree of mouth opening (assessed using the maximum mouth opening: MMO) and pain (assessed using the visual analog scale: VAS) were assessed pre- and post-arthrocentesis. The study also investigated whether treatment modalities other than arthrocentesis (medication and appliance therapy) were performed. Statistical analysis revealed that there was a significant difference in mouth opening and pain after temporomandibular joint arthrocentesis. Preoperative appliance therapy affected the results of arthrocentesis, but it was not statistically significant. With regard to pain relief, preoperative diagnosis did not show a significant difference. However, with regard to maximum mouth opening, patients with disc displacement without reduction with limited mouth opening (closed lock) showed the highest recovery (11.13 mm). Conclusion: The average of MMO increase after arthrocentesis was 9.10 mm, and patients with disc displacement without reduction with locking (closed lock) showed most recovery in maximum mouth opening and it was statistically significant. The average pain relief of patients after arthrocentesis was 3.03 in the VAS scale, and patients using anterior repositioning splint (ARS) preoperatively showed the most pain relief.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권4호
• /
• pp.270-274
• /
• 2010

Introduction: Limited mouth opening is a representative clinical symptom of temporomandibular disorders (TMD) with anterior disc displacement without reduction (ADDWOR). Various treatment methods have been proposed for patients with ADDWOR. This study examined the clinical effectiveness of template therapy for patients with mouth opening difficulty due to the ADDWOR. Material and Methods: A total of 14 patients (female 12, male 2, average age: $29.1{\pm}14.4$), who had been treated in the template clinic, Sooncheonhyang University Bucheon Hospital, from January of 2006 to December of 2008, were enrolled in this study. The subjects were selected according to the following criteria: more than 2 weeks after the onset of locking, mouth opening range <35 mm, and confirmed ADDWOR without a synovial pathology by magnetic resonance imaging (MRI). All patients were treated with the template appliance, instructed to wear it while sleeping and exercise for at least 10 hours per day. The maximum mouth opening (MMO) range and pain recognition scores before and after template therapy were recorded and compared. A paired t-test and Wilcoxon's signed rank test were used for statistical analysis. Results: After the periodical follow up, significant improvement in the opening range was observed in the template treatment group. The average MMO range before treatment was $30.2{\pm}3.5mm$ and the average MMO after treatment and follow up was $47.1{\pm}4.7mm$. The mean amount of mouth opening increment was $16.9{\pm}5.4mm$ (P<0.01) and the pain recognition scores before and after treatment was also improved.(P=0.001) Conclusion: The template appliance proved to be efficient for the treatment of TMD with a closed lock and painful joint due to ADDWOR.

• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.5-11
• /
• 2014

The purpose of this paper is to investigate an analytical approach for opening performance evaluation of the nuclear pressure safety valve based on standard codes such as ASME or KEPIC. It is well-known that safety valve is considered as one of pressure relief valves for protecting a boiler or pressure vessel from exceeding the maximum allowable working pressure. When pressure in a container reaches its set pressure, the safety valve commences discharging the internal fluid by a sudden opening called as popping. Safety valve is usually evaluated by set pressure, full open, blow-down, leakage and flow capacity. The test procedure and technical requirement for performance evaluation is described in international code of ASME code such as BPVC. The opening characteristics of steam safety valve can be analyzed by computational fluid dynamics (CFD) and steam shaft dynamics. First, the flow analysis along opening process is simulated by running the CFD models of the ten types of opening steps from 0 to 100%. As a analysis result, the various CFD outputs of flow pattern, pressure, forces on the disc and mass flow at each simulation step is demonstrated. The lift force is calculated by using the forces applied on disc from static pressure and secondary flow. And, the effect of huddle chamber or control chamber is studied by dynamic analysis based on CFD simulation results such as lift force. As a result, dynamics analysis shows opening features according to the sizes of control chamber.