• Korean journal of food and cookery science
• /
• v.25 no.3
• /
• pp.350-356
• /
• 2009

In order to develop a natural food preservative, UlGeum (Curcuma longa L.) powder was extracted with ethanol, and its antimicrobial activity was investigated. This ethanol extract showed antimicrobial activity against Bacillussubtilis, Escherichiacoli, and Staphylococcus aureus, and the resulting inhibition zones against the microorganisms by the extract (4 mg/disc) were 11, 10, and 8.5 mm, respectively. To test for further food preservation effects, solutions of the extract were added to rice cakes and noodles at concentrations of 0%, 0.25%, 0.50%, 0.75%, and 1.00%, respectively. Microbial growth was less in the UlGeum ethanol extract-added groups than in the control group. In sensory evaluations, there were significant differences among the groups of rice cakes and noodles in terms of color, taste, flavor, chewiness, and overall acceptability (p<0.05), and the 0.5% added groups received significantly higher scores than the other groups. Furthermore, as storage time increased, the sensory scores of the rice cakes and noodles significantly decreased in all groups (p<0.05). These results suggest that UlGeum is effective for increasing the shelf-life of rice cakes and noodles.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.3
• /
• pp.321-331
• /
• 2009

In this study, Salvia miltiorrhiza Bunge(Danshen) powder was extracted with ethanol, and its antimicrobial activity was investigated. The ethanol extract of the Danshen had antimicrobial activity against Bacillus subtilis, Escherichia coli, and Staphylococcus aureus. The inhibition zones of the Danshen extract(3 mg/disc) against B. subtilis, E. coli and S. aureus were 13, 12 and 8.5 mm, respectively. To test the food preservation effect of Danshen and determine the optimal ratio of the Danshen extract in a formulation, Sulgidduk samples were prepared with substitutions of 0, 0.25, 0.5, 0.75 and 1% Danshen extract, and then their quality characteristics were investigated over 4 days of storage. According to the results, total cell counts showed a decreasing trend with an increasing amount of added Danshen extract. Moisture contents were not significantly different among the Sulgidduk samples. As the content of Danshen extract increased, the L-values of samples decreased and the a- and b- values increased. For the textural characteristics, the hardness, gumminess, and chewiness of the Sulgidduk samples decreased as the amount of Danshen extract increased; however, they increased with the progression of storage time. In the sensory evaluation, the control group had significantly higher scores for color, flavor and after-taste as compared to the Danshen extract-added groups. With increasing Danshen extract contents, flavor and overall acceptability decreased, while Danshen flavor, bitterness and off-flavor increased. Chewiness was not significantly different among the samples. In conclusion, the results indicate that substituting 0.5% Danshen extract in Sulgidduk is optimal for quality and provides a product with reasonably high overall acceptability.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.67-80
• /
• 2014

Long-term stability and delayed failure of granite were evaluated through the laboratory test based on Wilkins method and Brazilian disc test (BDT) which yields tensile strength, mode I fracture toughness and subcritical crack growth parameters. Then, the long-term strength of granite was estimated by using analytical models and long-term stability of compressed air-energy storage (CAES) pilot cavern pressurized up to 5 ~ 6 MPa was evaluated using numerical code, FRACOD with the determined subcritical crack growth parameters. The results of test and analyses showed that the subcritical crack growth index, n was determined as 29.39 and the inner pressure of 5 ~ 6 MPa had an insignificant effect on the long-term stability of pilot cavern. It was also found that the measurement and analysis of acoustic emission events can describe the accumulation of damage due to subcritical crack growth quantitatively. That is, AE monitoring can provide the current status of rock under loading if we make an identical installation condition in the field with that of the laboratory test.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.229-236
• /
• 1995

Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.191-195
• /
• 2007

The optical disc drive has used a high NA objective lens and a shorter wavelength laser diode for high recording density. But high NA and shorter wavelength cause several margins to become short. Focusing and tracking servo has to be more accurate and active tilt compensation mechanism is also needed for coma aberration compensation. In this paper, we proposed 3-axis moving magnet type actuator. For 3-DOF motion, moving coil actuator has to be equipped with 6 wires for supplying 3 independent signals. However, moving magnet type actuator doesn't need to change the configuration of wires because coils are in stator. So, we added a tilt mechanism to the 2-axis moving magnet actuator which is designed in previous research. Addition of the tilt mechanism cuts down the focus sensitivity. So, maximization the tilting sensitivity and securing the focusing sensitivity are objectivities of this research. DOE (design of experiments) procedures of electromagnetic circuit are performed for parameter study and the optimization is also performed to maximize the tilt sensitivity. And then the final design is suggested and its performance is verified by FE simulation.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.816-822
• /
• 2006

The antimicrobial and antioxidative effect of mechanical bamboo smoke distillate (MBSD) and traditional bamboo smoke distillate (TBSD) were investigated. Antimicrobial activity was demonstrated against all the microorganisms used in this experiment and was the higher in TBSD than in MBSD, with an activity concentration in the range 10-50 ${\mu}m/8$ mm paper disc. At the same concentration the antimicrobial activities of TBSD and MBSD was Gram positive bacteria>gram negative bacteria>Lactotobacillus>yeast. The minimum inhibition concentration (MIC) of BSC was 1.0-7.3${\mu}L/mL$, and the maximum lethal concentration (MLC) was 26.7-116.7 ${\mu}L/mL$. The soybean oil oxidative stability increased with increasing BSD concentration. The induction periods of oil oxidation were 3.75, 4.57 and 12.06 days for the samples with BSD added at 0.1%, 0.5%, and 1.0%, respectively. The RAE in soybean oil with 0.5% BSD was evaluated to be 168.45%, being similar to that of the sample with 0.02% BHT.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.236-241
• /
• 2009

The objective of this study was to find an environment friendly method of ginseng storage disease control using a natural plant extract. Essential oil was evaluated in terms of its antifungal ability against a variety of ginseng storage pathogens, and a variety of essential oils was conducted in order to assess the possibility of applying them as a component of a disease control strategy. Direct treatment with essential oil was demonstrated to exert a ginseng storage control effect. Methyl eugenol and thymol were shown to exert a mycelial growth inhibition effect of 80% on PDA media, using a paper disc containing 200 ppm of essential oil against Botrytis cinerea. The application of direct methyl eugenol treatment to ginseng resulted in a profound control effect. Both spray and dipping treatment of each methyl eugenol as well as thymol, evidenced a disease develoment of 10-20% as compared with the over 80% observed from all non-treated packages. Methyl eugenol in the large packages resulted in a disease index of 0.60 in the two essential oil treatments and also a small diseased area, as compared with the disease index of 1.65 and the wide diseased area observed in the non-treatment groups. Treatment with a mixture (methyl eugenol + thymol) in the synergistic effect test resulted in a relatively wide diseased area, as no discernable synergistic effect was detected. Methyl eugenol and thymol can be utilized as control agents in an environmentally friendly ginseng storage treatment, owing to the avirulent and clear effects detected in this study. In particular, ginseng must be ingested when fresh, and this is why a product for the control of ginseng storage diseases is so necessary.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.256-256
• /
• 2006

The design and synthesis of novel biomolecular materials, based on mimicking the properties of molecules found in nature, is providing materials with unusual properties. Resilin serves as an energy storage material in insects and facilitates flight, jumping (in fleas, froghoppers etc) and sound production (cicadas, etc). Resilin is initially produced as a soluble protein and in its mature form is crosslinked through formation of dityrosine units into a very large insoluble polymer. In the present study, we have synthesized a recombinant form of resilin that can be photochemically cross-linked into a resilient, rubber-like biomaterial that may be suitable for spinal disc implants. This material is almost perfectly elastic and its fatigue lifetime in insects must be >500 million cycles.

• Transactions of the Korean hydrogen and new energy society
• /
• v.5 no.1
• /
• pp.9-17
• /
• 1994

Activation behavior, hydriding rate and disintegration were studied for a compact in pellet form and hydrogen storage alloy particles treated with newly developed inorganic solution. Cylindrical disc of 12.95mm diameter and of 7.1mm thickness was prepared by compressing(8ton) a mixture of $MmNi_{4.5}Al_{0.47}$ and PTFE. Chemical treatment of particles with 1mol of solution was performed at room temperature for several hours until the pH of solution did not change. Chemical treatment made much accelerated activation without any incubation period which generally exists in the untreated alloys and the hydriding reaction rate after full activation also was improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.162-167
• /
• 2006

Hot embossing lithography(HEL) has the production advantage of comparatively few process step, simple operation, a relatively low cost for embossing tools(Si), and high replication accuracy for small features. In this paper, we considered the nano-molding characteristic according to molding parameters(temperature, pressure, times, etc) and induced a optimal molding condition using HEL. High precision nano-patter master with various shapes were designed and manufactured using the DRIE(Deep Reactive ion Etching), LPCVD(Low Pressure Chemical Vapor Deposition) and thermal oxidation process, and we investigated the molding characteristic of DVD and Blu-ray nickel stamp. We induced flow behaviors of polymer, rheology by shapes and sizes of the pattern through various molding experiments. Finally, with achieving nano-structure molding with high aspect ratio, we will secure a basic technology about the molding of large-area nano-pattern media.