• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.337-346
• /
• 2006

Aims: The present study investigated the relationship between condylar resorption and craniofacial skeleton types(especially vertical relationships), the differences of craniofacial skeleton types between with open bite group and without open bite group, and the associations of anterior disc dislocation with or without reduction to condylar resorption with MRI. Patients selection and methods: Clinical examination, magnetic resonance imaging (MRI), panorama, lateral transcranial and lateral cephalometric radiographs in 34 patients with condylar resorption were used to investigate this relationship. Results and Conclusions: Patients with the following specific facial morphologic characteristics appear to be most susceptible to condylar resorption: (1) females were predominant, (2) patients' age ranged from 12 to 50 years old with a strong predominance for 2nd and 3rd decades, (3) patients had high mandibular plane angle and high gonial angle, (4) patients had decreased vertical height of the ramus, (5) patients had generally significant antegonial notch, (6) patients had predominance of Class I occlusal relationship with or without open bite but mandible was retruded as mean ANB 5.54 degrees, (7) condylar resorption rarely occurs in lower mandibular plane angle facial types, (8) although no statistically significant difference was found, the open bite group had a tendency more hyperdivergent skeletal pattern than the non open bite group, and (9) imaging demonstrates from small resorbing condyles to idiopathic condylar resorption and TMJ articular disc dislocations. Thus, morphologic features of patients with vertical discrepancies may represent a risk factor for the development of condylar resorption.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.315-320
• /
• 2004

Swing check valves are the most common type of check valve in nuclear power plant and need to be operated property to perform their functions and to keep the valve internals stable. However, for a swing check valve disc to remain stable, the opening characteristics should be identified and the upstream flow velocity should be enough to hold the disc fully open and without motion. Thus it is necessary to develop a model for predicting the flow velocity for a given disc opening. In the present study, the disc positions with mean flow velocity were measured for 3 inch and 6 inch swing check valves. Comparison of the measurements with the existing models showed that the models underestimate the mean flow velocity for a given disc position. Therefore, the existing model for predicting swing check valve disc position was improved with the realistic disc impingement area perpendicular to the flow stream and the experimental data. The result showed that the improved model with the best estimate of kb = 0.04 predicts well the disc openings of 6 inch swing check valve, especially in the low velocity region. For better prediction of the disc opening at high flow velocity, however, it is recommended to develop a kb correlation with the disc angle.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.6
• /
• pp.515-521
• /
• 2009

Objective : The purpose of this study was to compare clinical and radiological outcomes of percutaneous endoscopic lumbar discectomy (PELD) and open lumbar microdiscectomy (OLM) for recurrent disc herniation. Methods : Fifty-four patients, who underwent surgery, either PELD (25 patients) or repeated OLM (29 patients), due to recurrent disc herniation at L4-5 level, were divided into two groups according to the surgical methods. Excluded were patients with sequestrated disc, calcified disc, severe neurological deficit, or instability. Clinical outcomes were assessed using Visual Analogue Scale (VAS) score and Oswestry Disability Index (ODI). Radiological variables were assessed using plain radiography and/or magnetic resonance imaging. Results : Mean operating time and hospital stay were significantly shorter in PELD group (45.8 minutes and 0.9 day, respectively) than OLM group (73.8 minutes and 3.8 days, respectively) (p < 0.001). Complications occurred in 4% in PELD group and 10.3% in OLM group in the perioperative period. At a mean follow-up duration of 34.2 months, the mean improvements of back pain, leg pain, and functional improvement were 4.0, 5.5, and 40.9% for PELD group and 2.3, 5.1, and 45.0% for OLM group, respectively. Second recurrence occurred in 4% after PELD and 10.3% after OLM. Disc height did not change after PELD, but significantly decreased after OLM (p = 0.0001). Neither sagittal rotation angle nor volume of multifidus muscle changed significantly in both groups. Conclusion : Both PELD and repeated OLM showed favorable outcomes for recurrent disc herniation, but PELD had advantages in terms of shorter operating time, hospital stay, and disc height preservation.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.255-263
• /
• 2006

Objectives: This article reported three patients developed anterior open bite seemed to be related to TMJ anterior disc dislocation without reduction(ADD WO R), but no evidence of condylar destructive or collapse and analyzed the craniofacial skeletal structure by means of cephalometric analysis. Results: All patients suddenly developed a centric relation/centric occlusion discrepancy, an increased overjet and an anterior open bite following ADD WO R. All patients had Angle's Class I occlusion and shallow bite, but they had skeletally Class III and Class II pattern and all were vertically significant hyperdivergent type. Conclusions: These 3 patients had characteristics of common facial morphology including:(1)Angle classification Class I and shallow bite,(2)high mandibular plane angle,(3)high gonial angle. Developed anterior open bite resulted from clockwise rotation of the mandible related TMJ ADD WO R, rather than a result from the eruption of posterior teeth. We hypothesize rotation may relate to attached direction of masticatory muscle.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.4
• /
• pp.241-245
• /
• 2007

Objective : So called "minimally invasive procedures" have evolved from chemonucleolysis, automated percutaneous discectomy, arthroscopic microdiscectomy that are mainly working within the confines of intradiscal space to transforaminal endoscopic technique to remove herniated epidural disc materials directly. The purpose of this study is to assess the result of endoscopic spinal surgery and favorable indication in the thoracolumbar spine. Methods : The records of 71 patients, 73 endoscopic procedures, were retrospectively analysed. Yeung Endoscopic Spine Surgery system with 7 mm working sleeve and $25^{\circ}$ viewing angle was used. The mean follow up period was 6 months [range, 3-9]. Results : Operated levels were from T12-L1 disc down to L5-L6 of S1 disc. Of 71 cases, 2 patients underwent transforaminal endoscopic surgery twice due to recurrence after initial operation. MacNab's criteria was used to assess the outcome. Favorable outcome, excellent of good, was seen in 78% [57 procedures] of the patients. Among 11 fair outcomes, only 1 procedure was followed by secondary open procedure, laminectomy with discectomy. Two of 5 poor outcomes were operated again by same procedure which resulted in fair outcomes. One patient with aggravated cauda equina syndrome remained poor and a lumbar fusion procedure was performed in other patient with poor outcome. There were 2 postoperative discitis that were treated with conservative care in one and anterior lumbar interbody fusion in the other. Conclusion : Evolving technology of mechanical, visual instrument enables minimal invasive procedure possible and effective. The transforaminal endoscopic spinal surgery can reach as high as T12-L1 disc level. The rate of favorable outcome is mid-range among reported endoscopic lumbar surgery series. Authors believe that the outcome will be better as cases accumulate and will be able to reach the fate of standard open microsurgery.

• Journal of Oral Medicine and Pain
• /
• v.32 no.3
• /
• pp.293-303
• /
• 2007

The purpose of this paper is to evaluate if there is a relationship between anterior disc displacement without reduction and development of anterior open bite, and a relation between occurrence of open bite and occlusal appliance therapy. In general, the statistically significant differences were found between the Group 1 and 2 and normal mean group. The variables that represent mandibular size and form, showed a statistical significance in all 3 groups. Also 3 groups patients had a smaller ANB, a larger FMA than normal mean group. When we compared the 3 groups with respect to all cephalometric measurements by One-way analysis of variance (ANOVA), group 1 and 2 patients had a larger FMA, a larger SN to mandibular plane angle, a larger maxillomandibular plane angle, a larger occlusal plane to mandibular plane angle, a smaller total posterior facial height/total anterior facial height(%), and a larger gonial angle than group 3. The statistically significant differences were not found between the Group 1 and 2, and skeletal patterns were similar. Thus, morphologic features of patients with vertical discrepancies may represent a risk factor for the development of anterior open bite with or without occlusal appliance treatment. In case of patients with vertical discrepancy, we may have to be more careful when inducing a change of the vertical dimension.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.5
• /
• pp.1551-1559
• /
• 2014

We consider functions that map the open unit disc conformally onto the complement of an unbounded convex set with opening angle ${\pi}{\alpha}$, ${\alpha}{\in}(1,2]$, at infinity. We derive the exact interval for the variability of the real Taylor coefficients of these functions and we prove that the corresponding complex Taylor coefficients of such functions are contained in certain discs lying in the right half plane. In addition, we also determine generalized central functions for the aforesaid class of functions.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.81-88
• /
• 2011

The triple eccentric butterfly valve has metal sheet and this study about butterfly valve ceiling is an innovative approach. But it is affected by the static pressure as well as cross-current. The damage at the valve on the pipe resulted from the reflux is due to valve leakage. This study is investigated on the triple eccentric disk and it is applied with angle and the static pressure in all cases to develop cross-current triple eccentric butterfly valves. The disc with the diameter of 300A is valve against flow velocity. The entrance pressure by flow characteristics is performed with numerical analysis. As the result, valve torque production is reduced more than the conventional triple eccentric valve and entrance pressure is decreased on the increase of valve open angle. And flow coefficient can be known to be increased.

• Journal of Trauma and Injury
• /
• v.25 no.1
• /
• pp.7-16
• /
• 2012

Purpose: Cervical dislocations with locked facets account for more than 50% of all cervical injuries. Thus, investigating a suitable management of cervical locked facets is important. This study examined factors of close reduction failure in traumatically locked facets of the subaxial cervical spine patients to determine suitable surgical management. Methods: We retrospectively analyzed of the case histories of 28 patients with unilateral/bilateral cervical locked facets from Nov. 2004 to Dec. 2010. Based on MRI evaluation of disc status at the injury level, we found unilateral dislocations in 9 cases, and bilateral dislocations in 19 cases, The patients were investigated for neurologic recovery, closed reduction rate, factors of the close reduction barrier, fusion rate and period, spinal alignment, and complications. Results: The closed reduction failed in 23(82%) patients. Disc herniation was an obstacle to closed reduction (p=0.015) and was more frequent in cases involving a unilateral dislocation (p=0.041). The pedicle or facet fracture was another factor, although some patients showed aggravation of neurologic symptoms, most patients had improved by the last follow up. The kyphotic angle were statistically significant (p=0.043). Sixs patient underwent anterior decompression/fusion, and 15 patients underwent circumferential fusion, and 7 patients underwent posterior fusion. All patients were fused at 3 months after surgery. The complications were 1 case of CSF leakage and 1 case of esphageal fistula, 1 case of infection. Conclusion: We recommend closed reduction be performed as soon as possible after injury to maximize the potential for neurological recovery. Patients fot whom closed reduction of the cervical locked facets have a higher incidence of anatomic obstacles to reduction, including facet fractures and disc herniation. Immediate direct open anterior reduction or circumferential fixation/fusion of locked cervical facets is recommended as a treatment of choice for traumatic locked cervical facet patients after closed reduction failure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.4937-4943
• /
• 2012

Butterfly valves have been used to control the flow rate of various fluids in many industries because it have unique manageability compare to other valves. The flow rate passing through the butterfly valves can be controlled according to the coefficient of capacity calculated by disk angle change. In this study, flow analysis by 3D modeling was performed to derive the coefficient of capacity to evaluate and improve newly developed butterfly valves. Also, required measurement system was established to verify the performance of the valves, and to compare with the calculated results.