• 대한한의학회지
• /
• 제16권2호
• /
• pp.62-78
• /
• 1995

In industrialized countries, low back pam is very common, with up to 60 to 80% of the population being affected at some time in their lives. Herniated lumbar intervertebral disc is one of principal cause of low back pain and radiculopathy. The therapy of the disease is classified into conservative treatment or surgical intervention. The majority of these cases successfully heal with conservative managemant, even though it was claimed that the henirated disc material would not resolved spontaneously without surgical removal. It was reported that there was no significant difference in outcome and cost effectiveness between conservative and surgical therapy group. Also after conservative therapy the resorption of herniated disc with satisfactory improvement of symptom was reported. Conservative treatment includes bed rest, heat, drug therapy, therapeutic exercises, physical therapy such as traction and manipulation, and acupuncture. These managements show favorable outcome in the patients with herniated lumbar intervertebral disc. So conservative management should be applied in the therapy of herniated intervertebral disc, unless there exist aggravation during the first 3 weeks of treatment or apparent surgical care indication. And further investigation to improve effectiveness of conservative therapy should be ensued.

• 연구논문집
• /
• 통권28호
• /
• pp.229-238
• /
• 1998

비파괴평가의 대상이 되는 소재나 부품은 관련 표준시험편을 이용하여 평가되고, 표준시험편은 평가대상과 동일 또는 유사한 재질로 제작되어야 한다고 규정하고 있다. 따라서 비파괴평가가 요구되는 소재나 부품을 생산, 외국에 수출하기 위해서는 반드시 공인된 설비와 품질관리 체계로부터의 인증이 선행되어야 한다. 본 논문에서는 초음파를 이용한 항공기용 Udimet 720Li 디스크의 비파괴평가를 위하여 ASTM에 규정되어 있는 4340강 초음파 표준시험편의 적용타당성을 제시하였다. 현미경 시험을 통하여 Udimet 720Li 합금의 미세조직을 규명하고, 고출력 초음파 분석시스템을 이용한 펄스의 위상값을 측정하는 방법으로 4340강 표준시험편 및 Udimet 720Li 합금의 초음파 속도와 감쇠값을 구하였다. 결론적으로 4340강 초음파 표준시험편이 Udimet 720Li 디스크의 평가를 위한 표준시험편으로 사용될수 있음을 증명하였다.

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.731-743
• /
• 2016

Plastic behaviors, based on the von Mises yield criterion, of circular discs containing a purely elastic, circular inclusion under uniform temperature loading are studied with the finite element analysis. Temperature-dependent mechanical properties are considered for the matrix material only. In addition to analyzing the plane stress and plane strain disc, a 3D thin disc and cylinder are also analyzed to compare the plane problems. We determined the elastic irreversible temperature and global plastic collapse temperature by the finite element calculations for the plane and 3D problem. In addition to the global plastic collapse, for the elastically hard case, the plane stress problem and 3D thin disc may exhibit a local plastic collapse, i.e. significant pile up along the thickness direction, near the inclusion-matrix interface. The pileup cannot be correctly modeled by the plane stress analysis. Furthermore, due to numerical difficulties originated from large deformation, only the lower bound of global plastic collapse temperature of the plane stress problem can be identified. Without considerations of temperature-dependent mechanical properties, the von Mises stress in the matrix would be largely overestimated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.546-552
• /
• 2012

This paper is a study on squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material. For this, data of pressure and temperature dependent material properties of lining is achieved by using lining data base and exponential curve fit. Complex eigenvalue analysis is performed for predicting squeal noise frequency and instability and chassis dynamo test is performed for achieving squeal noise frequency, sound pressure level, occurrence temperature & pressure. Initial multi models are composed for considering complex interface conditions such as pad ear-clip, piston-housing and guide pin-torque member. The simulation result of base models is compared with the test result. Squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material is performed and analyzed using multi models. And additional condition is disc material property variation. Entire simulation conditions are combined and analyzed. Finally, this paper proposes direction of the warm squeal noise model.

• 도시과학
• /
• 제10권1호
• /
• pp.11-20
• /
• 2021

In this study, the vibration characteristics were theoretically analyzed by modeling a free isotropic rotating disk with an outer periphery with a fixed inner periphery, paying attention to disks used as storage devices for information devices, especially magnetic disks, magneto-optical disks, and compact disks in which the head and disk are non-contact. Iluminate with Composite materials represented by fiber-reinforced plastics (FRP) have high specific strength (strength/density) and specific stiffness (narrowness/density). It is used in the elements, and its use is rapidly expanding. Under this circumstance, the disk currently manufactured using an isotropic material made of various plastic materials such as aluminum or polycarbonate as a base material is an extremely anisotropic material made of a composite material, and the circumferential stiffness of the disk is made of reinforcing fibers in the circumferential direction. It is modeled as an anisotropic rotating disk with increased, and its influence on the vibration characteristics is revealed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.150-153
• /
• 1995

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.607-612
• /
• 2004

Disc brake noise continues to be a major concern throughout the automotive industry despite efforts to reduce its occurrence. Eliminating vibrations during braking is an important task for both vehicle passenger comfort and reducing the overall environmental noise levels. There are several classes of disc brake noise, the major ones being squeal, judder, groan, and moan. In this study, analytical model for moan noise of rear disk brake is investigated. Modeling of the disc brake assembly to take account of the effect of different geometrical and contact parameters is studied through the use of multi-body model. The contact stiffness of the caliper and torque member plays an important role in controlling brake vibration. Therefore, a suitable material pair at the caliper/body contact has been made. An ADAMS model of a rear disc brake system was integrated with a flexible suspension trailng arm from MSC/NASTRAN. A fully non-linear dynamic simulatin of brake system behavior, containing rigid and flexible bodies, was performed for a Prescribed set of operating conditions. Simulation results were validated using data from vehicle experimental testing.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.58-65
• /
• 1999

The spinning machine has been developed for a bus and truck wheel disc which is manufactured by spinning process method. This machine has the mechanical structure with bed, 2-column, cross head, 2-vertical slide, 2-horizontal slide with forming roller, clamp slide and main spindle similar to large size vertical lathe. Main spindle attached the mandrel is rotated about 500rpm drived by 280kW power DC motor, and a rotating black material pressed on the mandrel with the clamp slide is spinformed by 2-forming rollers which are attached inner end of the 2-horizontal slides. The 2-vertical and 2-horizontal slides are actuated by the hydraulic cylinder which is controlled by the servo valve individially, and these servo valves are controlled by control signal of the CNC controller which is computed with position signal feedbacked from the encoder sensor. The developed machine can manufacture wheel disc of various section profile without mandrel change because section profile is easily modified using program editing in the CNC controller processor. The wheel disc manufactured by spinning process method has many advantages that the endurance is increased by 2 times and the weight is decreased by 30% compared with a conventional disc.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.213-218
• /
• 2012

파열판이 양 끝에 부착된 액체 로켓 엔진의 자연 발화 점화기와 이에 활용 가능한 파열판에 관하여 문헌 조사를 수행하였다. 특허로 등록된 미국의 MC-1 엔진 및 러시아의 RD-170 엔진의 자연발화 점화기 설계와 NASA에서 사용된 파열판의 기본적인 성능이 분석되었다. 그리고 파열판의 종류, 특성, 성능과 이와 관련된 설계 인자와 ASME 표준이 조사되었다. 성능으로 파열압과 관련된 파열 공차, 역압, 흐름 교란, 파열 후의 조각 발생 여부, 재질, 작동 유체, 운영비 등이 있다. 또한 파열판 구조 해석과 관련된 문헌조사도 수행하였다.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.93-100
• /
• 2003

This paper describes the thermoelastic instability arising from friction heat generation in braking and proposes the finite element methods to predict the variation of temperature and thermal deformation. In a conventional disc brake analysis, heat generation is only related with wheel speed and friction material and the interface pressure between disc and pad is assumed constant. But under dynamic braking conditions, the frictional heat causes the thermoelastic distortion that leads to more concentrated contact pressure distribution and hence more and more non-uniform temperature. In this paper, to complete the solution of the thermomechanically coupled problem, the linear relation model between pressure and temperature is proposed and demonstrated in examples of a simple two dimensional contact problem. And the two dimensional model has been extended to an annular three dimensional disc model in order to consider more realistic geometry and to provide a more accurate critical speed for automotive brake systems.