• 대한정형외과학회지
• /
• 제52권1호
• /
• pp.65-72
• /
• 2017

목적: 후관절 근접 낭종이 동반된 퇴행성 요추부 질환으로 수술 받은 23명의 환자를 대상으로 방사선적 특징과 임상적 결과를 분석하고자 한다. 대상 및 방법: 23명의 환자를 대상으로 척추관 협착증 동반 여부, 불안정성, 척추 전방 전위증 동반 여부, 낭종의 위치 및 방향, 후관절의 퇴행성 변화 정도, 후관절 각도, 추간판 퇴행 정도를 확인하였다. 모든 환자에게 광범위 감압술 및 기기고정 유합술을 시행하였다. 임상적 결과를 Oswestry low back pain disability questionnaire 및 visual analogue scale을 이용하여 평가하였다. 결과: 23예 중 19예(82.6%)에서 척추관 협착증이 동반되었고, 4예(17.4%)에서는 후관절 낭종이 독립적으로 존재하였다. 이 중 7예(30.4%)에서 불안정성과 전방 전위가 동반되었다. 낭종의 발생은 제4-5 요추간(69.6%)이 가장 많았으며 이환된 병변측의 후관절이 반대측에 비하여 심한 퇴행성 변화를 보였다. 후관절 각도는 좌 우측에 유의한 차이가 없었으며 해당 분절의 추간판은 17예(69.6%)에서 퇴행성 변화를 보였다. 임상적 결과는 수술 후 2년 추시 양호하였다. 결론: 낭종의 발생과 퇴행성 변화는 유의한 상관관계가 있었으며 후관절 낭종과 동반된 퇴행성 요추부 질환에서 광범위 감압술 및 유합술이 좋은 임상적 결과을 얻어 유용한 술식으로 생각된다.

• 대한정형도수물리치료학회지
• /
• 제16권2호
• /
• pp.88-92
• /
• 2010

Purpose: This study was undertaken to evaluate the effect analysis of clinical sing in 40 patients with lumbar intervertebral disc. Methods: All patients were assessed by the low back pain protocol which was composed of symptom, clinical sing before and after the treatment. The effect of clinical sing was analyzed by age, occupation, duration of symptom. Results: Occupation by clinical sing of after the treatment was desking job s from 3.6 to 5.2 scores(p<0.05). Duration of symptoms by clinical sing of after the treatment was over 4 months from 3.8 to 5.5 scores(p<0.05). Clinical sing of after the treatment was straight leg raising test from 1.275 to 1.850 scores, sensory disturbances from 1.425 to 2.575 scores, manual muscle testing from 1.525 to 4.625 scores. Conclusion: Herniated disks are most common in middle age, especially between 35 and 45, due to aging-related degeneration of the disks. Significant or increasing pain, numbness or weakness spreading to one or both legs. Progressive loss of sensation in areas that would touch a saddle (inner thighs, back of legs and area around the rectum).

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.331-348
• /
• 1994

The purpose of this study was to investigate changes in the shape and ultrastructure of the articular disc of the rat mandibular joint with aging. Mechanical stress applied to the articular disc changes during neonatal, suckling, juvenile, adult and senile stages. Mandibular joints of 6 groups of rats(1-, 7-, 17-, 27-, 55-day and over-1-year groups) were removed en bloc and processed for light and electro microscopic study. The changes in the shape of articular disc were examined by light microscope in each group. Structural and ultrastructural changes in the articular disc were examined by light and electron microscope in each group. The results were as follows : In the 1-day and 7-day groups, the articular disc was long and slender in shape and the articular disc was not fitted with the shape of the mandibular fossa and condyle. However' after that time, the anterior and posterior portions of the articular disc were more bulged and the middle portion was shorter and biconcave. Thus the articular disc was well fitted with the shape of the mandibular fossa and condyle. The cell density decreased with aging. In the l -day and 7-day groups, the Golgi apparatus, rough endoplasmic reticulum and free ribosome, which are involved in the synthesis of intracellular and extracellular matrix, were developed. In the 17-day, 27-day and 55-day groups, not only the cell organelles involved in the synthesis of the intracellular and extracellular matrix but also the cell organelles involved in the remodeling of the extracellular matrix(i.e., finger-like cell process, lysosome and mitochondria)were well developed. With advancing age, intracytoplasmic microfilaments were more accumulated and condroid cells increased. In the over-1-year group, the majority of cells of the articular disc were chondroid cells. The majority of cytoplasmic compartment were filled with intracytoplasmic microfilaments and cell organelles were not developed. Therefore, metabolic activities of the cell was markedly reduced and cells contained structures enduring mechanical stress, and cells which were in the process of degeneration were observed occasionally.

• Physical Therapy Rehabilitation Science
• /
• 제10권2호
• /
• pp.235-243
• /
• 2021

Objective: This study aimed to investigate the short-term effects of flexion-distraction spinal manipulation on intervertebral height, pain, spine mobility in patients with lumbar degenerative disc disease. Design: Randomized controlled trial with a pretest-posttest control group design Methods: A total of 96 participants with degenerative disc disease participated in the study and were randomly divided into two groups. Both groups received intervention for 3-5 minutes a day. The experimental group (n=48) underwent flexion-distraction spinal manipulation for 3-5 minutes, and the control group (n=48) was maintained in the same position as the experimental group for 5 minutes without any intervention. The intervertebral height was measured by computed tomography, pain was assessed using visual analog scale, and the spine in flexion mobility was measured using the finger-to-floor distance test and passive straight leg raise test. Pre-test and post-test measurements were obtained. Results: The experimental group showed significant improvement in intervertebral height, degree of pain, and spinal mobility (p<0.05). The intervertebral height increased from 6.32±1.90 to 6.93±1.85 mm (p<0.05), lower back pain decreased from 69.17±13.35 mm to 48.48±12.20 mm (p<0.05), lumbar spine mobility changed from 17.37±4.49 to 12.69±4.34 cm (p<0.05), and passive straight leg raise test range increased from 46.94±13.05° to 56.01±12.20° (p<0.05). Conclusions: This study suggests that flexion-distraction spinal manipulation could be an effective treatment for decreasing pain and improving function in patients with degenerative disc disease.

• Journal of Korean Neurosurgical Society
• /
• 제46권4호
• /
• pp.333-339
• /
• 2009

Objective : Few studies on the clinical spectrum of automated pressure-controlled discography (APCD)-defined positive discs have been reported to date. Thus, the present study was undertaken to analyze clinical parameters critical for diagnosis of discogenic pain and to correlate imaging findings with intradiscal pressures and pain responses in patients with APCD-positive discs. Methods : Twenty-three patients who showed APCD-positive discs were selected for analysis. CT discogram findings and the degrees of nuclear degeneration seen on MRI were analyzed in comparison to changes of intradiscal pressure that provoked pain responses; and clinical pain patterns and dynamic factors were evaluated in relation to pain provocation. Results : Low back pain (LBP), usually centralized, with diffuse leg pain was the most frequently reported pattern of pain in these patients. Overall, LBP was most commonly induced by sitting posture, however, standing was highly correlated with L5/S1 disc lesions (p<0.01). MRI abnormalities were statistically correlated with grading of CT discogram results (p<005); with most pain response observed in CT discogram Grades 3 and 4. Pain-provoking pressure was not statistically correlated with MRI grading. However, it was higher in Grade 3 than Grade 4. Conclusion : APCD-positive discs were demonstrated in patients reporting centralized low back pain with diffuse leg pain, aggravated by sitting and standing. MRI was helpful to assess the degree of nuclear degeneration, yet it could not guarantee exact localization of the painful discs. APCD was considered to be more useful than conventional discography for diagnosis of discogenic pain.

• Journal of Korean Neurosurgical Society
• /
• 제62권5호
• /
• pp.603-609
• /
• 2019

Objective : The purpose of this retrospective study was to determine which of the proximal adjacent segment disease (ASD) and distal ASD was more prevalent and what parameters is more related to ASD in proximal levels and distal levels after more than 2 levels fusions. Methods : The medical records were reviewed retrospectively for 856 cases. A total of 66 cases of ASD were enrolled. On preop magnetic resonance imaging, disc degeneration was measured at the upper and lower parts of surgically treated levels and confirmed by the commonly used Pfirrmann grade. Segmental flexibility in sagittal plane was embodied in segment range of motion (ROM) obtained through flexion and extension X-ray before surgery. Coronal angle was recorded as methods Cobb's angle including fusion levels preoperatively. For the comparison of categorical variables between two independent groups, the chi-square test and Fisher exact test were performed. Results : Proximal ASD and distal ASD were 37/856 (4.32%) and 29/856 (3.39%), respectively. The incidence of proximal ASD was relatively high but insignificant differences. In comparison between ASD group and non ASD group, proximal Pfirmman was higher in proximal ASD and distal Pfirmman was higher in distal ASD group (p=0.005, p<0.008, respectively). However, in the ROM, proximal ROM was higher in proximal ASD, but distal ROM was not different between the two groups (p<0.0001, p=0.995, respectively). Coronal angle was not quite different in both groups (p=0.846). Conclusion : In spite of higher frequency in ASD in proximal level in spinal fusion, it is not clear that incidence of ASD in proximal level is not higher than that of distal ASD group in more than 2 level thoracolumbar fusions. Not only Pfirrmann grade but also proximal segmental ROM is risk factor for predicting the occurrence of ASD in patients more than 2 level of thoracolumbar spine fusion operation excluding L5S1.

• Journal of Korean Neurosurgical Society
• /
• 제58권3호
• /
• pp.225-230
• /
• 2015

Objective : The clinical outcomes according to the radiological results after cervical total disc replacement (TDR) are not well established. Here, the authors reviewed the clinical results according to the asymmetry in radiographs. Methods : This retrospective analysis included patients after TDR ($Mobi-C^{(R)}$ disc) with at least 12 months follow up, and the clinical and radiological data were obtained preoperatively and postoperatively for 12 months. Clinical outcome measures numerical rating scale (NRS) score for neck pain, visual analog scale (VAS) for arm pain, and the Oswestry disability index (ODI) value. The asymmetries of TDRs were evaluated on the anterior-posterior (AP) and the lateral radiographs, and the radiographic adjacent segment degenerations were evaluated for 12 months. Results : A total of 24 patients (one level cervical TDR; 10 male and 14 female; aged $41.50{\pm}8.35years$) were included in this study. The clinical results including NRS for neck pain, VAS for arm pain, and ODIs were similar between the normal and asymmetrized TDRs in AP and lateral radiographs. The radiographic adjacent segment degenerations were significantly increased in deviated TDRs (AP >10 mm asymmetry and lateral>10 mm asymmetry). Conclusion : Asymmetrical location of TDR is not related to the clinical outcomes, but related to the risk of radiographic adjacent disc segment degeneration.

• Journal of Korean Neurosurgical Society
• /
• 제46권5호
• /
• pp.437-442
• /
• 2009

Objective : To characterize perioperative biomechanical changes after thoracic spine surgery. Methods : Fifty-eight patients underwent spinal instrumented fusions and simple laminectomies on the thoracolumbar spine from April 2003 to October 2008. Patients were allocated to three groups; namely, the laminectomy without fusion group (group I, n = 17), the thoracolumbar fusion group (group II, n = 27), and the thoracic spine fusion group (group III, n = 14). Sagittal (ADS) and coronal (ADC) angles for adjacent segments were measured from two disc spaces above lesions at the upper margins, to two disc spaces below lesions at the lower margins. Sagittal (TLS) and coronal (TLC) angles of the thoracolumbar junction were measured from the lower margin of the 11th thoracic vertebra body to the upper margin of the 2nd lumbar vertebra body on plane radiographs. Adjacent segment disc heights and disc signal changes were determined using simple spinal examinations and by magnetic resonance imaging. Clinical outcome indices were determined using a visual analog scale. Results : The three groups demonstrated statistically significant differences in terms of angle changes by ANOVA (p<0.05). All angles in group I showed significantly smaller angles changes than in groups II and III by Turkey's multiple comparison analysis. Coronal Cobb's angles of the thoracolumbar spine (TLC) were not significantly different in the three groups. Conclusion : Postoperative sagittal balance is expected to change in the adjacent and thoracolumbar areas after thoracic spine fusion. However, its prevalence seems to be higher when the thoracolumbar spine is included in instrumented fusion.

• 대한의용생체공학회:의공학회지
• /
• 제31권1호
• /
• pp.56-66
• /
• 2010

The various total replacement artificial discs have developed because spinal fusion has shown a lesser mobility of an operated segment and an accelerated degeneration at adjacent discs. But almost artificial discs have not yet been reached on the substitute surgery of fusion because many problems such as those clinical success rates were not more than them of fusion have not solved. In this paper, vertically inserted assemble-screw fixture in vertebrae was proposed to improve the fixed capability of artificial disc. And also, to evaluate the design suitability of newly designed screw-type, including fixtures of commercial discs such as wedge and plate type, the 1/4 finite element model with a vertebra and various implanted fixtures were generated, and next, 3 bending motions such as flexion, bending and twisting under the moment of 10Nm and compression under the force of 1000N were considered, respectively and finally, FE analyses were performed. Results of three fixture types were compared, such as Range of Motion and maximal stress, and so on. For ROM, the screw type was average 58% less than the wedge type and was average 42% less than the plate type under all loading conditions. For average stress ratio at closer nodes between vertebra and each fixture, the wedge type was the lowest as minimum 0.02 in twisting, screw types were the highest as maximum 0.28 in compression. As the results of using cement material, it was predicted that the instability problem of the wedge type was better solved. The screw type which could be increased by implanting depth according to the number of assembling mid screws, showed that the decreased tendency of ROMs and maximal cancellous bone stresses. In further study, controlling the number of assembling screws that was suitable for a patient's bone quality, development of surgical tools and keeping on design supplementations, which will be able to develop the competitive artificial disc.

• Journal of Korean Neurosurgical Society
• /
• 제47권6호
• /
• pp.446-453
• /
• 2010

Objective : The purpose of this study was to analyze the biomechanical effects of three different constrained types of an artificial disc on the implanted and adjacent segments in the lumbar spine using a finite element model (FEM). Methods : The created intact model was validated by comparing the flexion-extension response without pre-load with the corresponding results obtained from the published experimental studies. The validated intact lumbar model was tested after implantation of three artificial discs at L4-5. Each implanted model was subjected to a combination of 400 N follower load and 5 Nm of flexion/extension moments. ABAQUS$^{TM}$ version 6.5 (ABAQUS Inc., Providence, RI, USA) and FEMAP version 8.20 (Electronic Data Systems Corp., Plano, TX, USA) were used for meshing and analysis of geometry of the intact and implanted models. Results : Under the flexion load, the intersegmental rotation angles of all the implanted models were similar to that of the intact model, but under the extension load, the values were greater than that of the intact model. The facet contact loads of three implanted models were greater than the loads observed with the intact model. Conclusion : Under the flexion load, three types of the implanted model at the L4-5 level showed the intersegmental rotation angle similar to the one measured with the intact model. Under the extension load, all of the artificial disc implanted models demonstrated an increased extension rotational angle at the operated level (L4-5), resulting in an increase under the facet contact load when compared with the adjacent segments. The increased facet load may lead to facet degeneration.