• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.165-178
• /
• 2021

We studied driftwood behaviors including generation and deposition in a tsunami using a numerical simulation. We used an integrated two-dimensional numerical model, which included a driftwood dynamics model. The study area was Sendai, Japan. Observation data collected by Inagaki et al. (2012) were used to verify the simulation results by comparing them with driftwood deposition patterns. A simplified model was developed to consider the threshold of driftwood generation by the drag force of water flows. To consider the volume of driftwood generated, we estimated the total wood number in the study area using Google Earth. Therefore, we simulated more than 13,000 pieces of driftwood that were generated and transported inland from approximately 300,000 trees that were growing in the forest. The final distribution of the driftwood was similar to the observation data. The reproducibility of the generation and deposition patterns of driftwood showed good agreement in terms of longitudinal deposition pattern. In the future, a sensitivity analysis on driftwood parameters, such as the size of the wood, boundary conditions, and grid size, will be implemented to predict the travel patterns of driftwood. Such modeling will be a useful methodology for disaster prediction based on water flow and driftwood.

• Journal of Korea Water Resources Association
• /
• v.52 no.6
• /
• pp.441-449
• /
• 2019

Drought is a longer lasting and more extensive disaster than other natural disasters, resulting in significant socioeconomic damage. Even though drought events have same severity, their damage vary from region to region because of spatial, technical, economic, and social circumstances. In this study, drought vulnerability was assessed considering socioeconomic factors. Preliminary factors were identified from the case study for Chungcheong province, and evaluative factors were selected by applying the principal component analysis. The entropy method was applied to determine the weights of evaluative factors. As a result, in Chungcheong province, farm population, number of recipient of basic living, water fare gap indicator, area of industrial complex, amount of underground water usage, amount of water available per capita, water supply ratio, financial soundness for water resources, amount of domestic water usage, amount of agricultural water usage and agricultural land area were chosen as the evaluative factors. Among them, the factors associated with agriculture had larger weights. The overall assessment of vulnerability indicated that Cheongju, Dangjin and Seosan were the most vulnerable to drought.

• Journal of Climate Change Research
• /
• v.2 no.1
• /
• pp.43-54
• /
• 2011

Recently, due to severe rainfall by the global climate change, natural disasters such as landslide had also been increased rapidly all over the world. Therefore, it has been very necessary to assess vulnerability of landslide and prepare adaptation measures to future climate change. In this study, we employed sensitivity, exposure and adaptative capacity as criteria for assessing the vulnerability of landslide due to climate change. Spatial database for the criteria was constructed using GIS technology. And vulnerability maps on the entire Korea of past and future were made based on the database. As a result, highly vulnerable area for landslide was detected in most area of Gangwon-do, the east of Gyeonggi-do, and southeast of Jeollanam-do, and the southwest of Gyeongsangnam-do. The result of landslide vulnerability depends on time shows that degree of very low class and low class were decreased and degree of moderate, high, and very high were increase from past to the future. Especially, these three classes above low class were significantly increased in the result of far future.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.235-243
• /
• 2019

Recently, urban inundation was frequently occurred due to the intensive rainfall exceeding marginal capacity of the flood control facility. Furthermore, needs for the underground storage facilities to mitigate urban flood are increasing according to rapidly accelerating urbanization. Thus, in this study, drainage efficiency in drain tunnel connecting to underground storage was investigated from the air-core measurements in the drop shaft against two types of inlet structure. In case of the spiral inlet, the multi-stage structure is introduced at the bottom of the inlet to improve the vortex induction effect at low inflow discharge (multi-stage spiral inlet). The average cross-sectional area of the air-core in the multi-stage spiral inlet is 10% larger than the tangential inlet, and show the highly air emission effect and the highly inflow efficiency at the high inflow discharge. In case of the tangential inlets, the air emission effect decreased after exceeding the maximum inflow discharge, which is required to maintain the inherent performance of the tangential inlet. From the measurements, the empirical formula for the cross-sectional area of the air-core according to locations inside the drop shaft was proposed in order to provide the experimental data available for the inlet model used in experiments.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.577-589
• /
• 2021

Drone mapping systems can be applied to many fields such as disaster damage investigation, environmental monitoring, and construction process monitoring. To integrate individual sensors attached to a drone, it was essential to undergo complicated procedures including time synchronization. Recently, a variety of composite sensors are released which consist of visual sensors and GPS/INS. Composite sensors integrate multi-sensory data internally, and they provide geotagged image files to users. Therefore, to use composite sensors in drone mapping systems, mapping accuracies from composite sensors should be examined. In this study, we analyzed the mapping accuracies of a composite sensor, focusing on the data acquisition area and pre-calibration effect. In the first experiment, we analyzed how mapping accuracy varies with the number of ground control points. When 2 GCPs were used for mapping, the total RMSE has been reduced by 40 cm from more than 1 m to about 60 cm. In the second experiment, we assessed mapping accuracies based on whether pre-calibration is conducted or not. Using a few ground control points showed the pre-calibration does not affect mapping accuracies. The formation of weak geometry of the image sequences has resulted that pre-calibration can be essential to decrease possible mapping errors. In the absence of ground control points, pre-calibration also can improve mapping errors. Based on this study, we expect future drone mapping systems using composite sensors will contribute to streamlining a survey and calibration process depending on the data acquisition circumstances.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.359-366
• /
• 2011

The objective of this study was to analyze the changes of crown fire hazard possibility from the effects of forest tending works (FTW) in Pinus densiflora stands in Korea. The study sites were located in Youngju (FTW) and Bonghwa (Control) areas. Ten representative sample trees were destructively felled at each areas to analyze the crown fuel characteristics. The results of this study showed that crown fuel moisture content in Youngju and Bonghwa areas were 103.6% and 104.4%, respectively. The needles and twigs with less than 1cm diameter accounted 50.3% of the total crown fuel load in Youngju area and 62.0% in Bonghwa area. On the other hand, it was observed in Youngju that the canopy bulk density was $0.11kg/m^3$ lower but have 1.3 m higher average canopy base height therefore having a possibility of lower crown fire hazard as compared to Bonghwa that had higher canopy bulk density and lower canopy base height.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.3
• /
• pp.37-43
• /
• 2021

This study aimed to calculate the amount of change in soil carbon due to changes in land cover. Among the various soil carbon models, the InVEST Carbon Storage and Sequestration module was used. LULC is one of the leading factors affecting soil carbon. Therefore, this study compared the total amount of soil carbon due to changes in LULC in 2000 and 2010 across the Republic of Korea, and calculated the changes in each administrative district (city). Changes in LULC in Korea were mainly due to the increase in developed and dry areas and the decrease in grassland, indicating changes in soil carbon. The total amount of soil carbon changes in South Korea has been reduced by 11.48 (millions) in 10 years. The amount of soil carbon by administrative region decreased in most cities and provinces, but Jeju Island, in exception, showed an increase in soil carbon. Among the cities and provinces except Jeju Island, Seoul showed the smallest decrease, with a decrease of 0.033 (million t). On the contrary, the largest number of attempts to decrease was to Gyeongsangbuk-do, which saw a total decrease of 2.893 (million t). Jeju Island is the only soil carbon-increasing area with an increase of 0.547 (millions) and the agricultural area has increased 2.1 times in 10 years. In the case of soil carbon, the construction of ground observation data at the national unit is insufficient, and verification will need to be carried out through linked analysis using multiple models in the future.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.603-615
• /
• 2020

The design factors of artificial recharge are determined by considering the hydrogeological characteristics of the aquifer. The optimal design factors for artificial recharge were derived after performing the injection tests step by step for each injection type (vertical well, ditch and mixed type), which were built in the test site of the study area. It was analyzed that the difference in the injection effect according to the diameter of the injection well was not large, and the 100 mm well was evaluated as appropriate in consideration of the availability and economy of land use. Since the injection effect was well maintained even in the upper rock, the depth of the injection well was proposed for the alluvial layer and the upper rock layer. On the other hand, in four cases of filter media in the ditch, it was analyzed that the penetration efficiency and the hydraulic interference effect indicated excellent injection performance when a filter medium of 10 to 30 mm diameter was filled in the ditch. In addition, the proper spacing of the injection wells was analyzed as 9~12 m considering the interference efficiency. The interference efficiency attenuation coefficient per 1 m of hole spacing was calculated to be 1.75% in this area. In the future study, the artificial recharge design factors obtained in this stage are applied and verified on site construction and operation. Also it is expected to contribute to securing water in areas where there is always a lack of water.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.641-651
• /
• 2022

This research compares and analyzes evacuation time depending on the change in stair width in case of fire at Goshiwons. For this, a simulation has been conducted based on possible evacuation time according to the calculation method for the number of people admittable to a specific target for fire fighting equipped with accommodation. Currently, Gosiwon, which is classified as an accommodation facility (a total floor area of 500 m² or more), uses blind spots prescribed by the Fire Services Act, Building Act, and Parking Act to build a high-rise building on a small area of land, and most Gosiwon is transformed into a modified accommodation. This is in line with the owner's operating profit, so it is expected to show a continuous increase. Securing the golden time of Gosiwon evacuation time is the last bastion of Gosiwon residents who belong to the economically disadvantaged in our society, and we hope this study will serve as a starting point for discussions on revising related laws and regulations to establish a social safety net As a result of the evacuation simulation analysis, the evacuation time was the least when the width of the group and the evacuation stairs were expanded to 200cm, and the evacuation time of the existing building was reduced by up to 166.3 seconds by comparing 648.4 seconds and scenario 6. This analysis can be meaningful, in that the width of the evacuation stairs revision of related laws and regulations for the safety of multiplex available premises.