• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.384-391
• /
• 2019

Nutrients in stormwater runoff have raised concerns regarding water quality degradation in the recent years. Low impact development (LID) technologies are types of nature-based solutions developed to address water quality problems and restore the predevelopment hydrology of a catchment area. Two LID facilities, infiltration trench (IT) and infiltration planter (IP), are known for their high removal rate of nutrients through sedimentation and vegetation. Long-term monitoring was conducted to assess the performance and cite the advantages and disadvantages of utilizing the facilities in nutrient removal. Since a strong ionic bond exists between phosphorus compounds and sediments, reduction of total phosphorus (TP) (more than 76%), in both facilities was associated to the removal of total suspended solids (TSS) (more than 84%). The efficiency of nitrogen in IP is 28% higher than IT. Effective nitrification occurred in IT and particulate forms of nitrogen were removed through sedimentation and media filters. Decrease in ammonium- nitrogen (NH₄-N) and nitrite-nitrogen (NO₂-N), and increase in nitrate-nitrogen (NO₃-N) fraction forms indicated that effective nitrification and denitrification occurred in IP. Hydrologic factors such as rainfall depth and rainfall intensity affected nutrient treatment capabilities of urban stormwater LID facilities The greatest monitored rainfall intensity of 11 mm/hr for IT yielded to 34% and 55% removal efficiencies for TN and TP, respectively, whereas, low rainfall intensities below 5 mm resulted to 100 % removal efficiency. The greatest monitored rainfall intensity for IP was 27 mm/hr, which still resulted to high removal efficiencies of 98% and 97% for TN and TP, respectively. Water quality assessment showed that both facilities were effective in reducing the amount of nutrients; however, IP was found to be more efficient than IT due to its additional provisions for plant uptake and larger storage volume.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.2
• /
• pp.135-145
• /
• 2020

Wave observation is widely used to direct observation method for observing the water surface elevation using wave buoy or pressure gauge and remote-sensing wave observation method. The wave buoy and pressure gauge can produce high-quality wave data but have disadvantages of the high risk of damage and loss of the instrument, and high maintenance cost in the offshore area. On the other hand, remote observation method such as radar is easy to maintain by installing the equipment on the land, but the accuracy is somewhat lower than the direct observation method. This study investigates the data quality of MIROS Wave and Current Radar (MWR) installed at Dokdo and improve the data quality of remote wave observation data using the wave buoy (CWB) observation data operated by the Korea Meteorological Administration. We applied and developed the three types of wave data quality control; 1) the combined use (Optimal Filter) of the filter designed by MIROS (Reduce Noise Frequency, Phillips Check, Energy Level Check), 2) Spike Test Algorithm (Spike Test) developed by OOI (Ocean Observatories Initiative) and 3) a new filter (H-Ts QC) using the significant wave height-period relationship. As a result, the wave observation data of MWR using three quality control have some reliability about the significant wave height. On the other hand, there are still some errors in the significant wave period, so improvements are required. Also, since the wave observation data of MWR is different somewhat from the CWB data in high waves of over 3 m, further research such as collection and analysis of long-term remote wave observation data and filter development is necessary.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.577-583
• /
• 2007

To overcome certain disadvantages of past typical control techniques for toxic contaminants emitted from various industrial processes, the current study was conducted to establish a thermal catalytic system using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst and to evaluate catalytic thermal destruction of five chlorinated hydrocarbons[chlorobenzene(CHB), chloroform(CHF), perchloroethylene (PCE), 1,1,1-trichloroethane(TCEthane), trichloroethylene(TCE)]. In addition, this study evaluated the catalyst poison effect on the catalytic thermal destruction. Three operating parameters tested for the thermal catalyst system included the inlet concentrations, the incineration temperature, and the residence time in the catalyst system. The thermal decomposition efficiency decreased from the highest value of 100% to the lowest value of almost 0%(CHB) as the input concentration increased, depending upon the type of chlorinated compounds. The destruction efficiencies of the four target compounds, except for TCEthane, increased upto almost 100% as the reaction temperature increased, whereas the destruction efficiency for TCEthane did not significantly vary. For the target compounds except for TCEthane, the catalytic destruction efficiencies increased up to 30% to 97% as the residence time increased from 10 sec to 60 sec, but the increase of destruction efficiency for TCEthane stopped at the residence time of 30 sec, suggesting that long residence times are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Conclusively, the current findings suggest that when applying the transition-metal catalyst for the better destruction of chlorinated hydrocarbons, VOC type should be considered, along with their inlet concentrations, and reaction temperature and residence time in catalytic system. Meanwhile, the addition of high methyl sulfide(1.8 ppm) caused a drop of 0 to 50% in the removal efficiencies of the target compounds, whereas the addition of low methyl sulfide (0.1 ppm), which is lower than the concentrations of sulfur compounds measured in typical industrial emissions, did not cause.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.380-386
• /
• 2010

Objectives: The introduction of nickel-titanium alloy endodontic instruments has greatly simplified shaping the root canal systems. However, these new instruments have several unexpected disadvantages. One of these is tendency to screw into the canal. In this study, the influence of taper on the screw-in effect of the Ni-Ti rotary instrument were evaluated. Materials and Methods: A total of 20 simulated root canals with an S-shaped curvature in clear resin blocks were divided into two groups. ProFile .02, .04, .06 (Dentsply-Maillefer) and GT rotary files .08, .10, .12 (Dentsply) were used in Profile group, and K3 .04, .06, .08, .10, and .12 (SybronEndo, Glendora) were used in K3 group. Files were used with a single pecking motion at a constant speed of 300 rpm. A special device was made to measure the force of screw-in effect. A dynamometer of the device recorded the screwin force during simulated canal preparation and the recorded data was stored in computer with designed software. The data were subjected to one-way ANOVA and Tukey's multiple range test for post-hoc test. p value of less than 0.05 was regarded significant. Results: The more tapered instruments generated more screw-in forces in Profile group (p < 0.05). In K3 group, 0.08, 0.10. and 0.12 tapered instruments showed more screw-in force than 0.04 tapered one, and 0.08 and 0.12 tapered instruments showed more screw-in force than 0.06 tapered one (p < 0.05). Conclusions: The more tapered instruments seems to produce more screw-in force. To avoid this screw-in force during instrumentation, more attention may be needed when using more tapered instruments.

• Journal of the Korean Geographical Society
• /
• v.28 no.4
• /
• pp.379-391
• /
• 1993

Present-day world economy is characterized by : technology nationalism, economic regionalism, market protectionism, multinational corporations, efc. All nations are striving for intensifying national economic rivalry and seeking after their own interests above everything else. Many regions of the world are also forming trading blocs, which could negatively affect nonmember states. The ultimate way to meet these difficulties is to establish production facilities in the countries imposing trade regulations. However, as the existing models of direct forrign investment (DFI) do not account for the particular nature of Korean firm's DFI activities, a new point of departure is imperative. It is because of this that Korean firms have only limited firm-specific advantages, the basic precondition of extant DFI theories, compared with their developed counterparts.

• Journal of Chest Surgery
• /
• v.31 no.4
• /
• pp.353-361
• /
• 1998

Hypothermia is widely acknowledged as fundamental component of myocardial protection during cardiac operations. Although it prolongs the period of ischemic arrest by reducing oxygen demands, hypothermia is associated with a number of major disadvantages, including its detrimental effects on enzymatic function, energy generation, and cellular integrity. The ideal way to rotect the heart is to electromechanically arrest it and perfus it with blood that is aerobic arrest. However alternative technique has been developed, based on the principles of electromechanical arrest and normothermic aerobic perfusion using continuous warm blood cardioplegia. To determine if continuous warm blood cardioplegia was beneficial in clinical practice during valvular surgery, we studied two groups of patients matched by numbers and clinical characteristics. Group included is 31 patients undergoing valvular surgery who received intermittent cold crystalloid cardioplegia. Group II included 30 patients undergoing valvular surgery who received continuous warm blood cardioplegia. Our results suggest that the heartbeat in 100% of patients treated with continuous warm blood cardioplegia converted to normal sinus rhythm spontaneously after the removal of the aortic cross-clamp, compared to only 31% of the cold cardioplegia group. After operation, pericardial closure rate was 90% area in the warm group, compared to 35% area in the cold group. 12 hours after the operation, the total amount of urine output in the warm group was greater than that in the cold group(2863${\pm}$127 ml versus 2257${\pm}$127 ml; p<0.05). After the operation, left diaphragmatic elevation developed in 55% of the cold group but in 0% of the warm group. CK-MB level in the warm group was significantly lower than cold group(2.28${\pm}$0.62 versus 9.96${\pm}$2.12; p<0.01) 1 hour after operation and CK-MB level in the warm group was significantly lower than cold group(1.80${\pm}$1.01 versus 6.00${\pm}$1.74; p<0.05) 12hours after operation. Continuous warm blood cardioplegia is at least as safe and effective as hypothermic technique in patients undergoing cardiac valvular surgery. Conceptually, this represents a new approach to the problem of maintaining myocardial preservation during cardiac operations.

• The Korean Society of Law and Medicine
• /
• v.13 no.1
• /
• pp.199-247
• /
• 2012

According to the review and analysis of medical cases that are assigned to the Supreme Court and all local High Court in 2011 and that are presented in the media, it was found that the following categories were taken seriously, medical and pharmaceutical product liability, the third principle of trust between medical institutions, negligence and causation estimation, responsibility limit, the meaning of medical records and related judgment of disturbed substantiation, Oriental doctors' duties to explain the procedures, IMS events, whether one can claim for each medical care operated by non-physician health care institutions to the nonmedical domain in the National Health Insurance Corporation, and the basis of norms for each claim. In the cases related to medical pharmaceutical product liability, Supreme Court alleviated burden of proof for accidents with medical and pharmaceutical products prior to the practice of Product Liability Law and onset the point of negative prescription as the time of damage strikes to condition feasibility of the specific situation. In the cases related to the 3rd principle of trust between medical institutions, the Supreme Court refused to sentence the doctor who has trusted the judgment of the same third-party doctors the violations of the care duty. With respect to proof of a causal relationship and damages in a medical negligence case, the Supreme Court decided that it is unjust to deny negligence by the materials of causal relationship rejecting the original verdict and clarified that the causal relationship shall not deny the reasons to limit doctors' responsibilities. In order not put burden on patients with disadvantages in which medical records and the description of the practice or the most fundamental and important evidence to prove negligence and causation are being neglected, the Supreme Court admitted in the hospital's responsibility for the case of the neonate death of suffocation without properly listed fetal heart rate and uterine contraction monitor. On the other hand, the Seoul Western District Court has admitted alimony for altering and forging medical records. With respect to doctors' obligations to description, the Supreme Court decided that it is necessary to explain the foreseen risks by the combination of oriental and western medicines emphasizing the right of patient's self-determination. However, questions have arisen whether it is realistically feasible or not. In a case of an unlicensed doctor performing intramuscular stimulation treatment (IMS), the Supreme Court put off its decision if it was an unlicensed medical practice as to put limitation of eastern and western medical practices, but it declared that IMS practice was an acupuncture treatment therefore the plaintiff's conduct being an illegal act. In the future, clear judgment on this matter should be made. With respect to the claim of bills from non-physical health care institutions, the Supreme Court decided to void it for the implementation of the arrangement is contrary to the commitments made in the medical law and therefore, it is invalid to claim. In addition, contrast to the private healthcare professionals, who are subject to redemption according to the National Healthcare Insurance Law, the Seoul High Court explicitly confirmed that the non-professionals who receive the tort operating profit must return the unjust enrichment and have the liability for damages. As mentioned above, a relatively wide range of topics were discussed in medical field of 2011. In Korea's health care environment undergoing complex changes day by day, it is expected to see more diverse and in-depth discussions striding out to the development in the field of health care.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.637-648
• /
• 2009

As the cost of disks decreases, PCs are soon expected to be equipped with a disk of 1TB or more. Assuming that a single person generates 1GB of data per month, 1TB is enough to store data for the entire lifetime of a person. This has lead to the growth of researches on lifelog management, which manages what people see and listen to in everyday life. Although many different lifelog management systems have been proposed, including those based on the relational data model, based on ontology, and based on file systems, they have all advantages and disadvantages: Those based on the relational data model provide good query processing performance but they do not support complex queries properly; Those based on ontology handle more complex queries but their performances are not satisfactory: Those based on file systems support only keyword queries. Moreover, these systems are lack of support for lifelog group management and do not provide a convenient user interface for modifying and adding tags (metadata) to lifelogs for effective lifelog search. To address these problems, we propose a lifelog management system based on the relational data model. The proposed system models lifelogs by using the relational data model and transforms queries on lifelogs into SQL statements, which results in good query processing performance. It also supports a simplified relationship query that finds a lifelog based on other lifelogs directly related to it, to overcome the disadvantage of not supporting complex queries properly. In addition, the proposed system supports for the management of lifelog groups by providing ways to create, edit, search, play, and share them. Finally, it is equipped with a tagging tool that helps the user to modify and add tags conveniently through the ion of various tags. This paper describes the design and implementation of the proposed system and its various applications.

• Journal of Legislation Research
• /
• no.44
• /
• pp.611-653
• /
• 2013

An whistle-blowing is recognition of acts of misconduct or corruption by individuals(laborers) or party which belongs to a certain organization and it refers to the act of informing to the senior organization or to the outside public agency to avoid jeopardies that could be potentially lead against benefit of the public. These whistle-blowings can be a Ansatz that improve corporation's transparency and accountability by prevention of enterprise's misconduct as well, it has been recognized as an important role for the establishment of corporate ethics, moreover, social justice. What to be treated primarily as labor law problem is arousing some controversies of the possibility that the public announcement could be whether a disciplinary punishment or not because it brings some mischievous effects for the honor and the reputation to the company which conducted the illegal actions and the action of the contrary to the social value. And futhermore, recently, the matter of compensational responsibility according to the arrangement conversion, bullying followed by the informant has been brought up. The fundamental standpoint of precedent related with the judgement of justification for the punishment as reason of the whistle-blowing ought to do the sincere duty for the labor contract which is the employees are supposed to consider the employer's profits. For that reason, if the emploee release the inside fact to the public and give any damages to employer's secret or confidence or honor, it will be a causing reasong of the disciplinary punishment, but in specific cases, the relevant and level of punishment limitation can be judged by the contents of public announcement and the truth, the purpose of the acts and details and the way of announcement. Precisely, on the assumption that there are necessity of the characteristic profit or the freedom of expression for the informant, with overall consideration whether or the basis part of the informant is true or there is a fair reason which make the informant believe is true or the purpose of informant has the public profit or the contents of the whistle-blowing are important for relevant organization or the means and the way was suitable, if the whistle-blowing are approved to be resonable, the organization are not permitted the reprimand or dismiss Futhermore, to find the solution for the issues of the disciplinary punishment and the treatment of all sorts of disadvantages, for the reason of whistle-blowing, since the protection law for public declarer which was enacted in last 2011 have the position as the general law, the purport of the equal law has to be considered sytematically and also the judicial precedent which is related to the justification of whistle-blowing are needed to be considered as well.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.376-387
• /
• 2019

Melons are mostly grown in soil, but it is susceptible to damage due to injury by continuous cropping such as Fusarium wilt and root rot. Hydroponic cultivation system can overcome the disadvantages of soil cultivation with precise nutrition management and a clean environment. When using the coir substrate, the most environmentally friendly organic substrate used for hydroponics, it is analyzed how the growth and fruit quality of the melon depends on the ratio of chips and dust and the amount of irrigation. The purpose of this study was to provide the basic data of melon hydroponics when cultivated in spring. The two types of the coir substrates used in the experiments were chip and dust ratios of 3 :7 and 5 : 5 respectively. The substrate with high dust ratios had excellent physical characteristics, such as container capacity and total porosity, and the drainage EC level showed a high value of $3.0-6.8dS{\cdot}m^{-1}$. When the amount of irrigation is provided based on the drainage rate, the group provided the nutrient solution on the basis of 10% drainage supplied 91 L per plant, which was reduced by about 30% compared to the group with the highest water supply. In addition, the total drainage showed less than 10 L per plant with a minimum water supply and was reduced by 30 - 70% in substrate with a high dust rates. In substrate with high water supply and high dust ratio, leaf growth and fruit enlargement were good, and the soluble solids content varies greatly from cultivar to cultivar. If you provided the amount of irrigation based on 10% drainage rate, the fruit weight will be decreased, but the amount of irrigation can be reduced. Therefore, it is considered that managing the water & nutrient properly taking into account the characteristics of coir substrate and cultivar can produce melon of uniform quality using hydroponics.