• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.111-116
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1069-1077
• /
• 2009

For external noise prediction of railway vehicles, sophisticated individual source modelling as well as appropriate noise propagation model from the sources is necessary to ensure the accuracy of the predicted results and contributions of each equipment to the overall noise levels. Accurate and reasonable identification procedures of sound sources of equipment including source strength, directivity and positions installed in the train play an important role in a prediction model, since it is not easy to establish a simple model for the sources with a single rule due to the complexity of source characteristics of equipment in size and directivity pattern. This paper guidelines practical considerations for identification of noise sources in railway vehicles including typical source characteristics of several sub-systems that emits noise to the environment, particularly for electric multiple unit(EMU), and verify effectiveness of assumptions used in the modelling of equipment by measurement with a simple part. The predicted external noise level of a complete train using Exnoise, which was developed by Hyundai-Rotem and has been verified in the a lot of field-tests, incorporating source modelling considered in this paper shows close correlation with the measured ones.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.703-706
• /
• 2000

The acoustic characteristics radiated from the acoustic transducer with metal-piezoceramic laminated circular plate were simulated. The Vibrational modes of metal-piezoceramic laminated circular plates were calculated by using the finite element method. After meshing the inside closed boundary of the acoustic transducer, the pressure gradients and the isotaric lines were calculated for the various frequencies. It has been observed that the characteristics of the sound pressure calculated for the various frequencies. Also, the directivity patterns and the sound pressure radiated from the acoustic transducer were calculated by 2-dimensional analysis.

• 한국지반공학회논문집
• /
• 제33권11호
• /
• pp.21-34
• /
• 2017

지하투과레이더 신호는 같은 대상지반에 대하여 탐사를 수행하더라도 안테나의 지향성에 따라 신호의 진폭이 다르게 측정될 수 있으므로 이상구간 평가 시 안테나의 지향성을 고려하여야 한다. 본 논문의 목적은 전자기파의 반사특성분석을 통하여 안테나의 지향성을 조사하고, 지향성에 따른 이상구간의 검측이 가능한 각도의 유효범위를 평가하는 것이다. 지향성 측정을 위하여 원형의 금속봉을 반사체로 설정하고 전자기파의 E-평면(E-plane)과 H-평면(H-plane)에 대하여 안테나와 이루는 각도와 거리를 조절하며 반사파를 측정하였다. 측정된 반사파의 분석을 통하여 안테나에 대한 영역의 경계를 설정하였으며, 근거리장 및 원거리장 영역에서 각각 서로 거리가 다른 두 지점을 설정하여 근거리장 및 원거리장 영역에서의 방사 패턴을 조사하였다. 방사 패턴 측정 결과, 근거리장에서는 E-평면 및 H-평면 모두 최소 $50^{\circ}$ 이상의 구간에서 부엽이 나타나 주엽 방향 및 부엽 방향에 대하여 지향성을 보인 반면, 원거리장에서는 주엽 방향에 대해서만 지향성을 보였다. 근거리장 영역에서는 반사파의 진폭이 변동을 보이긴 하나 반사파와 잡음의 구분이 가능하여 분석의 신뢰도가 높은 반면 원거리장 영역에서는 반사파의 진폭은 안정된 모습을 보였으나 전자기파손실이 크기 때문에 반사파와 잡음의 구분이 어려워 분석의 신뢰도가 낮을 것으로 판단되었다. 본 연구에서 수행된 근거리장과 원거리장에서의 지향성 평가는 도심지와 같이 임의의 위치 및 깊이에 존재할 수 있는 이상구간 평가시 신뢰도 향상에 활용될 수 있음을 보여준다.

• 한국항해학회지
• /
• 제3권2호
• /
• pp.21-30
• /
• 1979

Echo sounder and Doppler sonar are to theultra-sonic transducers for measuring the depth and the ship's speed respectively. To measure the depth and speed with a single transducer, it is required to control the ultra-sonic beam to optional direction. In the past, the direction of the transducer itself is varied, but such a method provoked much problems in the mechanical design of the equipment. This paper deals with the method to control beam direciton by the phase control of the plural arrangement of transducers, and the results are studied by a computer simulation. The remarkable results of the study is condensed as follows; 1. The greater the interval of arrangement between transducers, the sharper the radiation pattern is, but in this case, the level of undesired sidelobe is also increased. 2. The control of radiation pattern up to 60 degree can be achieved by an adequate arrangement of more than 10 transducers. 3. It is shown that a simultaneous measurement of both depth and speed can be achieved by alternating directivity of the pulse by the method proposed in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1750-1753
• /
• 1997

This paper describes how the directivity pattern of the back-scattered sound pressure is distributed when a plane acoustic wave is incident on a righid spherical shell underwater. A coupled Finite Element-Boundary Element mehtod is developed as numerical technique. The result of the coupled FE-BE method is agreed with theoretical solution for algorithmic confirmation.

• ETRI Journal
• /
• 제28권6호
• /
• pp.796-798
• /
• 2006

This letter proposes a tapered stacked microstrip antenna for application in small unmanned aerial vehicles (UAVs), which has advantages in mountainous terrains. With its tapered structure and increased bandwidth designed to operate at the resonance frequency of 2.4 GHz, the proposed antenna improves directivity, accuracy, and precision of small UAVs. The test flight results show the proposed tapered antenna has a three times higher impedance capability of 350 MHz based on VSWR<2. The transmission pattern is also more reliable than that of previous antenna designs.

• 센서학회지
• /
• 제8권4호
• /
• pp.298-307
• /
• 1999

This paper describes the application of the coupled FE-BEM (finite element-boundary element method) for the numerical harmonic analysis of the linear dynamic behaviour of a magnetostrictive Terfenol-D rod in water. The magnetostrictive rod is three-dimensionally simulated to transduce applied electric current in a helical coil around the rod to mechanical displacement. The theoretical derivation of the magnetostrictive matrix equation is described in detail. The steady-state resonance response of the displacement is shown. In addition, the directivity pattern and the radiation impedance are also shown.

• 센서학회지
• /
• 제8권3호
• /
• pp.211-218
• /
• 1999

This paper describes the application of a coupled finite element-boundary element method (FE-BEM) to obtain the steady-state response of a piezoelectric transducer. The particular structure considered is a PZT4 disc-typed projector. The projector is three-dimensionally simulated to transduce applied electric charge on axial surfaces of the piezoelectric disc to acoustic pressure in air or in water. The directivity pattern of the acoustic field formed from the projected sound pressure is also simulated. And the displacement of the disc caused by the externally applied electric charge is shown in temporal motion. The coupled FE-BE method is described in detail.

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.15-21
• /
• 2003

본 연구에서는 다공관의 출구로부터 전파하는 충격성 소음의 전파특성을 실험적으로 파악하였다. 다공관은 공극율, 구멍지름 그리고 관의 길이를 각기 다르게 제작하여 충격파 관 출구에 부착하여 실험하였다. 충격파 전파마하수는 실제의 적용조건을 참고하여 1.02-1.2의 범위로 하였다. 지향성은 근음장과 원음장으로 구분하여 측정하였다. 또한 충격성 소음원인 펄스파의 전파과정을 조사하기 위하여 쉴리렌 광학장치를 이용하였다. 실험결과로부터 다공관의 소음저감 성능은 음장조건에 좌우됨을 알았다. 즉 근음장 조건에서는 다공관의 공극율과 관의 길이가 소음저감에 다소간의 영향을 미치지만, 원음장 조건에서는 다공관이 충격성 소음의 저감에 거의 기여하지 못하였다. 이와 같이 음장조건에 따라 충격성 소음의 저감성능이 다르게 되는 것은 근음장 조건에서는 관축방항으로 강한 지향성을 보이지만, 원음장 조건에서는 모든 방향으로 같은 세기로 전파하는 무지향성이기 때문이다.