• 한국컴퓨터정보학회논문지
• /
• 제16권3호
• /
• pp.99-107
• /
• 2011

패턴을 이용한 불가사리 특징 검출은 불가사리의 오목 특징과 볼록 특징을 모두 검출하기 어려우며 또한, 오목과 볼록을 구분 할 수도 없다. 오목과 볼록은 아무르불가사리의 중요한 구조적 특징으로서 반드시 찾아야 할 특징이며 오목과 볼록을 분류함으로서 차후 불가사리 인식에서도 필요하다. 따라서 본 논문에서는 아무르불가사리의 주요 특징인 오목과 볼록 특징을 추출하는 기법을 제안한다. 이 기법은 다방향 선형 스캐닝을 이용하여 오목과 볼록의 특징점 후보군을 형성하고 이 후보군에서 특징점을 결정한 후 추출된 특징점에 컨벡스 헐 알고리즘을 적용하여 오목 특징과 볼록 특징을 구분한다. 제안한 기법은 불가사리의 주요 특징인 오목 특징과 볼록 특징을 구분하여 효과적으로 추출한다. 따라서 향후 불가사리 인식을 위한 연구에 기여할 것으로 기대한다.

• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.97-104
• /
• 2023

본 논문은 지향성 스피커를 이용한 유해조류 퇴치 시스템을 제안한다. 유해조류 퇴치를 위한 기존 사운드 시스템은 소음공해로 인한 문제와 단조로운 소리로 인하여 조류의 학습효과로 효과성이 저하되는 단점을 가진다. 본 논문에서는 지향성 스피커를 이용하여 주변의 소음을 최소화하고 스피커 구동 장치에 대해 상하 및 좌우 각도를 자유롭게 하여 활용성을 극대화하였다. 또한 다양한 스캐닝 패턴을 이용하여 학습효과로 인한 성능저하 문제를 해결하였다. 향후, 원격제어 기능과 조류 종류를 인식할 수 있는 딥러닝 모델을 적용하여 중앙통제가 가능한 플랫폼으로 발전시키고자 한다.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1187-1192
• /
• 2012

본 논문에서는 네 방향으로 스캔 방향을 늘려 QR코드 파인더를 인식하는 방법을 제안한다. QR코드 인식의 첫 과정은 파인더 인식이다. 만약 파인더를 인식하지 못한다면 QR코드를 인식 할 수 없다. 기존의 QR코드 인식방법은 정면에서 촬영하지 않으면 QR코드를 인식하지 못한다는 문제점을 가지고 있다. 이러한 문제점을 극복하기 위해서 네 방향으로의 스캔과 후보군 영상을 사용하여 정확하게 파인더의 위치를 찾는다. 또한 모폴로지 연산을 이용하여 파인더의 위치를 다시 추려낸다. 제안된 방법을 입증하기 위해 기존의 인식 방법과 비교 실험을 수행하였고 그 결과 제안한 방법이 기존 방법보다 QR코드 파인더 인식률에서 우수함을 입증하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.402.1-402.1
• /
• 2014

Photonic force microscopy (PFM) is an optical tweezers-based scanning probe microscopy, which measures the forces in the range of fN to pN. The low stiffness leads proper to measure single molecular interaction. We introduce a novel photonic force microscopy to stably map various chemical properties as well as topographic information, utilizing weak molecular bond between probe and object's surface. First, we installed stable optical tweezers instrument, where an IR laser with 1064 nm wavelength was used as trapping source to reduce damage to biological sample. To manipulate trapped material, electric driven two-axis mirrors were used for x, y directional probe scanning and a piezo stage for z directional probe scanning. For resolution test, probe scans with vertical direction repeatedly at the same lateral position, where the vertical resolution is ~25 nm. To obtain the topography of surface which is etched glass, trapped bead scans 3-dimensionally and measures the contact position in each cycle. To acquire the chemical mapping, we design the DNA oligonucleotide pairs combining as a zipping structure, where one is attached at the surface of bead and other is arranged on surface. We measured the rupture force of molecular bonding to investigate chemical properties on the surface with various loading rate. We expect this system can realize a high-resolution multi-functional imaging technique able to acquire topographic map of objects and to distinguish difference of chemical properties between these objects simultaneously.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.67-75
• /
• 2013

우리나라는 삼면이 바다인 환경적 특성으로 인해 연안 양식 산업이 발전해 왔다. 번식력과 포식성이 매우 강한 아무르불가사리에 의해 우리나라 근해의 양식 산업이 받는 피해가 매년 급증하고 있다. 더욱이 아무르불가사리는 살아있는 어패류를 잡아먹기 때문에 양식 어민들의 피해가 매우 크다. 이 논문에서는 수중에서 획득한 아무르불가사리 영상에서 효과적으로 특징을 추출하는 방법을 제안하였다. 제안한 방법에서는 6-방향 스캐닝을 이용한 볼록 특징 추출을 사용하여 기존 방법에 비해서 적은 수의 특징 후보를 산출한다. 또한, 추출된 볼록 특징과 영역 중심점을 이용하여 후보 오목점을 선정한 후 최종 오목 특징을 추출한다. 군집 생활을 하는 불가사리의 특성 때문에 입력 영상의 불가사리 개체도 밀집되어 있다. 따라서 입력 영상에서 추출되는 특징 후보의 수를 최소화하는 것은 중요한 의미를 갖는다. 실험결과, 제안한 특징 추출 방법은 특징 후보수 대비 특징 추출률이 약 88%로 기존 방법에 비해 개선되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.163.2-163
• /
• 2001

Confocal scanning microscopy (CSM) has been reported as an excellent method using the optical probe in scanning probe microscopy (SPM). Transmission or reflection confocal scanning microscopy (TCSM, RCSM) has been used in the three-dimensional reconstruction of specimen or the non-destructive measurement in vivo. The axial movement of the primary focal point having the information of specimen gives a good measurement performance with the great sensitivity. Application of the confocal theory and astigmatism to displacement measurement sensor uses the aperture as the pinhole or slit after collecting lens relating to confocal response in non-contact measurement; and astigmatic lens using four-segments detector as short-range sensor, long-range one combining the grating and rotary one hating the rotary directional grating. The aperture type can play an ...

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권6호
• /
• pp.1635-1656
• /
• 2023

In Bayesian multi-target tracking, the Poisson multi-Bernoulli mixture (PMBM) filter is a state-of-the-art filter based on the methodology of random finite set which is a conjugate prior composed of Poisson point process (PPP) and multi-Bernoulli mixture (MBM). In order to improve the random finite set-based filter utilized in multi-target tracking of sensor scanning, this paper introduces the Poisson multi-Bernoulli mixture filter into time-matching Bayesian filtering framework and derive a tractable and principled method, namely: the time-matching Poisson multi-Bernoulli mixture (TM-PMBM) filter. We also provide the Gaussian mixture implementation of the TM-PMBM filter for linear-Gaussian dynamic and measurement models. Subsequently, we compare the performance of the TM-PMBM filter with other RFS filters based on time-matching method with different birth models under directional continuous scanning and out-of-order discontinuous scanning. The results of simulation demonstrate that the proposed filter not only can effectively reduce the influence of sampling time diversity, but also improve the estimated accuracy of target state along with cardinality.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• 한국주조공학회지
• /
• 제27권6호
• /
• pp.243-249
• /
• 2007

The effect of Re addition and solidification rate on the directional solidification behavior of Ni-Al model alloy has been investigated. Directional solidification (DS) were carried out using the modified Bridgman furnace with various solidification rates. The solid/liquid interface during directional solidification was preserved by quenching the specimen after the desired volume fraction of original liquid was solidified. The equilibrium partition coefficients of Al and Re Were estimated by measuring the compositions at the quenched solid/liquid interface. Then, the effect of Re addition on the elemental segregation behavior was carefully analyzed. The differential scanning calorimetry results showed that the Re addition results in increased ${\gamma}'$ solvus and freezing range of the alloy. It was also shown that the primary dendrite arm spacing gradually decreases with increasing the Re content, while the secondary dendrite arm spacing appears to be independent on the Re content. The compositional analyses clearly revealed that the segregation of Al increased with increasing the Re content and solidification rate, while that of Re was found to be independent on the solidification rate in the range of $10{\sim}100{\mu}m/s$ due to its sluggish diffusion rate in the Ni solid solution.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.609-614
• /
• 2012

We report on the NO gas sensing properties of non-directional ZnO nanofibers synthesized using a typical electrospinning technique. These non-directional ZnO nanofibers were electrospun on an $SiO_2$/Si substrate from a solution containing poly vinyl alcohol (PVA) and zinc nitrate hexahydrate dissolved in distilled water. Calcination processing of the ZnO/PVA composite nanofibers resulted in a random network of polycrystalline ZnO nanofibers of 50 nm to 100 nm in diameter. The diameter of the nanofibers was found to depend primarily on the solution viscosity; a proper viscosity was maintained by adding PVA to fabricate uniform ZnO nanofibers. Microstructural measurements using scanning electron microscopy revealed that our synthesized ZnO nanofibers after calcination had coarser surface morphology than those before calcination, indicating that the calcination processing was sufficient to remove organic contents. From the gas sensing response measurements for various NO gas concentrations in dry air at several working temperatures, it was found that gas sensors based on electrospun ZnO nanofibers showed quite good responses, exhibiting a maximum sensitivity to NO gas in dry air at an operating temperature of $200^{\circ}C$. In particular, the non-directional electrospun ZnO nanofiber gas sensors were found to have a good NO gas detection limit of sub-ppm levels in dry air. These results illustrate that non-directional electrospun ZnO nanofibers are promising for use in low-cost, high-performance practical NO gas sensors.