• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1097-1106
• /
• 2009

In this paper, the cross monopole antenna with branch element is presented and its radiation characteristics are investigated. To confirm the broadband characteristics of the proposed antenna, the experimental antenna is designed, fabricated, and its radiation characteristics are measured in PCS, WCDMA, WiBro and S-DMB band(1.750~2.655 GHz). It is shown that the designed antenna has the non-directional pattern in the horizontal plane, the directional pattern in the vertical plane, VSWR less than 1.5 and gain over 1.9 dBi in 1.72~2.82 GHz. From these results, the presented antenna is conformed as a broadband antenna which can be used for PCS, WCDMA, WiBro and S-DMB band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.239-244
• /
• 2015

Recently, Impulse radars using UWB technologies are widely use for measuring distance, or for transmitting uncompressed high resolution videos. However, since the UWB band spans over octave bands, it is not easy to design such a system. Wide band impedance matching is required for antennas and other RF area. In this study, we designed and fabricated sinuous antenna for 3~6 GHz octave band application. We also designed and attached a dielectric lens to improved the directional gain of the antenna. The gain of the antenna was 6~10 dBi. The dielectric lens attached sinuous antenna was used to transmit HD video data. The maximum reach distance was 90 meter with 10mW power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.891-895
• /
• 2010

A dual-band (UHF: 470-862 MHz, L: 1452-1492 MHz) digital video broadcasting-handheld (DVB-H) antenna is presented. The proposed antenna is composed of a planar inverted F-shape antenna (PIFA) with an input impedance matching circuit. The matching circuit improves antenna performance in the broad UHF bands (470-862 MHz: 63%). The proposed antenna has omni-directional patterns and sufficient gain (Ave. peak gain is about 1.70 dBi over 470-862 MHz) for the PMP applications. The antenna is contact with a PMP case (${\varepsilon}_r=3.2$) which is used as a substrate for the size reduction and compact design.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2017

In this paper, a planar directional beam-switchable antenna with four orthogonal beam directions is proposed. The proposed antenna is designed with two crossed active elements and two parasitic elements for each direction. The design methodology is described on the basis of the Yagi-Uda method for the active and parasitic elements, respectively. By adjusting the effective electric lengths of the parasitic elements, the roles of a director and a reflector are exchanged with each other. The planar four-way beam-switchable Yagi-Uda antenna is implemented. From the experimental results. The proposed design method is verified for orthogonal radiation beam switching.

• Information and Communications Magazine
• /
• v.28 no.12
• /
• pp.69-82
• /
• 2011

In recent years, the employment of directional antennas in ad hoc networks has significantly increased. MAC protocols for ad hoc networks with directional antennas have the potentiality of spatial reuse, large coverage range and network capacity, which mitigates the negative effects associated with omnidirectional antenna systems. However, they suffer from some issues such as hidden terminal problems, deafness, neighbor discovery, flaws with directional carrier sensing, etc. In this paper, we have surveyed the MAC protocols for ad hoc networks with directional antennas, which have been published in the literature, and compared them qualitatively in terms of major characteristics and network performances.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.16-22
• /
• 2009

The most efficient method to reduce duplicated messages is a partial dominant pruning for receiving and forwarding messages by in-fly format on the mobile ad hoc network. In this paper, we propose directional partial dominant pruning method by expanding partial dominant pruning for reducing not only number of forwarding nodes but number of antenna elements on the ad hoc network with directional antennas. by simulation, we prove superiority that average number of forwarding nodes for each antenna element and the ratio of duplicated messages for each nodes rather than existing partial dominant pruning method though the number of antenna elements are increasing rather than in case of using omni antennas.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.386-391
• /
• 2019

This paper presents analysis results for the effect of the directional group delay of the antenna to implement a precision radio navigation system. The analysis was conducted through antenna simulation and test, and the test was performed in an anechoic chamber. The directional group delay of the antenna was calculated in phase-based analysis method. The results showed that a variation of up to 7.7ns in group delay occurred per antenna direction. The group delay variation from the analysis is 2.31 meters when converted into distance. It was tested using a real radio navigation system based on the time of arrival (TOA). The test verified the distance variation of 2.1 meters, and this value is similar to those obtained from the simulation and chamber test analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.7
• /
• pp.643-649
• /
• 2013

In this paper, human heartbeat detection using signal reflected from the antenna which is varied reflection coefficient by near field variation of the antenna. For detection reflected signal from antenna, 20 dB directional coupler is used because of not affecting transmitting signal. Variance of reflection coefficient of dipole antenna is about 0.07 dB which is too small the distinction between heartbeat and noise. Sensitivity increasing method is applied and heartbeat is clearly detected. Due to phase and magnitude errors come from discrete value components, antenna is located some points in experiments ro find optimum sensitivity position. And providing verification of using communication signal, heartbeat detection when frequency modulated signal which have 4 MHz bandwidth is applied.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.628-631
• /
• 2006

This paper explains about the design, fabrication, and measurement of directional dipole antenna for MMDS. The proposed dipole antenna is an electric wave guide with a director at $\lambda/4$ distance and is also designed to have directivity. The high gain antenna is realized by using a reflector at $45^{\circ}degree$. The fabricated antenna shows the return loss of -35dB at the center frequency 2.06GHz and also has the bandwidth of about 310MHz (>15%) under the condition of VSWR<2. The gain of dipole antennas is 11.5dBi.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.519-526
• /
• 2021

In this paper, an array antenna for LOS datalink for mounting UAV(Unmanned Aerial Vehicle) of low-probability of intercept is presented. For low RCS, radome was designed by conformal form, and other components were inserted into the UAV. The antenna of the transmitter and receiver are each composed of 12×12 array antennas, and include a beam steering function by controlling the phase of the unit element for the Uni-directional pattern and the Bi-directional pattern. As a result of the measurement of the manufactured antenna, it was confirmed that all the required specifications were met, and the installing possibility of the UAV platform on low-probability of intercept in the future was confirmed.