• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.126-130
• /
• 2003

The optical power transfer of TM modes in grating-assisted directional couplers (GADCs) with three-guiding channels is rigorously evaluated by defining a novel coupling efficiency amenable to the rigorous analytical solutions of modal transmission-line theory (MTLT). The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the period, the duty cycle, and wavelength.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.116-117
• /
• 2005

• 한국인터넷방송통신학회논문지
• /
• 제11권3호
• /
• pp.47-52
• /
• 2011

세 채널로 구성된 나노 크기의 플라즈마 방향성 결합기가 모드 결합효과와 립형 전송구조를 사용하여 설계되었다. 종방향 모드 전송선로 해석법을 이용하여 방향성 결합기에서 전파하는 빛의 전파특성과 설계특성들을 분석하였다. 전력분배기로 동작하는 플라즈마 방향성 결합기는 약 200~250 nm의 전송 폭을 갖는 나노 크기로 설계하였다. 최적의 전력분배율을 얻기 위하여 중심 채널의 폭 변화에 따른 전송 모드들의 굴절률을 분석하였다. 결국, 하향 채널에서 입사된 광 신호를 각 채널을 통하여 출력하는 나노 크기의 플라즈마 방향성 결합기가 설계되었다.

• 한국해안해양공학회지
• /
• 제19권6호
• /
• pp.586-595
• /
• 2007

고유함수전개법을 사용하여 구한 파일 방파제에 의한 규칙파의 산란 해석해를 다방향 불규칙파로 확장하였다. 규칙파중 입사파의 주파수 그리고 입사각을 변화시키면서 구한 반사율과 투과율 그리고 파랑하중을 가지고 산란파 스펙트럼과 하중 스펙트럼을 표현하였다. 주파수와 입사각의 함수인 2차원 스펙트럼을 적분하여 산란파와 파랑하중의 대푯값을 구하고 방향분포함수, 주파향, 잠긴깊이 그리고 공극율이 투과율과 파랑하중에 미치는 영향을 살펴보았다.

• 유공압시스템학회논문집
• /
• 제6권2호
• /
• pp.14-21
• /
• 2009

The typical hydraulic hoisting system of the rack-bar type sluice gate is composed of a hydraulic supply unit using an uni-directional pump, a direction control valve, a hydraulic motor, a counter balance valve, and flow control valves. Here, the hydrostatic transmission is applied to the hoisting system of rack-bar type sluice gate to simplify the operation of gate such that the upward and downward direction of gate is simply controlled by the direction of pump rotation. The new hydraulic hoisting system is composed of a bi-directional pump, a hydraulic motor, two counter balance valves, two check valves, two pilot-operated check valves, two relief valves and a shuttle valve. The characteristics of a suggested system are analyzed by computer simulations.

• 유공압시스템학회논문집
• /
• 제7권4호
• /
• pp.15-22
• /
• 2010

The typical hydraulic hoisting system of the rack-bar type sluice gate is composed of a hydraulic supply unit using an uni-directional pump, a direction control valve, a hydraulic motor, a counter balance valve, and flow control valves. Here, the hydrostatic transmission is applied to the hoisting system of rack-bar type sluice gate to simplify the operation of gate such that the upward and downward direction of gate is simply controlled by the direction of pump rotation. The new hydraulic hoisting system is composed of a bi-directional pump, a hydraulic motor, a counter balance valve, two check valves, two pilot-operated check valves, two relief valves and a shuttle valve. The characteristics of a suggested system are analyzed by computer simulations and experiments.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.86-92
• /
• 2010

The typical hydraulic hoisting system of the rack-bar type sluice gate is composed of a hydraulic supply unit using an uni-directional pump, a direction control valve, a hydraulic motor, a counter balance valve, and flow control valves. Here, the hydrostatic transmission is applied to the hoisting system of rack-bar type sluice gate to simplify the operation of gate such that the upward and downward direction of gate is simply controlled by the direction of pump rotation. The new hydraulic hoisting system is composed of a bi-directional pump, a hydraulic motor, a counter balance valve, two check valves, two pilot-operated check valves, two relief valves and a shuttle valve. The characteristics of a suggested system are analyzed by computer simulations and experiments.

• Wind and Structures
• /
• 제4권4호
• /
• pp.353-366
• /
• 2001

With respect to serviceability, antenna masts should be designed so that wind-induced motion will not cause unacceptable lack of transmission for broadcasting users and wireless communication. For such antenna masts with directional radio transmission the serviceability limit state is predominantly governed by the tolerable change of the broadcasting angle of the mounted antenna assembly and therefore by the tip distortion of the mast. In this paper it will be shown that refinements of the present state of design of antenna masts are possible by using the statistics of extremes applied to extreme wind situations and by consideration of the statistical and reliability requirements given by the operator such as frequency and return period of passing the serviceability limit.

• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.960-965
• /
• 2015

본 논문에서는 인공전송선로 중 LUC(Low-pass filter Unit Cell) 구조를 이용한 결합선로 방향성 결합기를 제안한다. 일반적인 결합선로 결합기는 ${\lambda}/4$ 길이의 전송 선로를 사용하므로 소형화에 한계가 있다. 반면에 제안한 결합기는 $90^{\circ}$보다 아주 작은 두 결합선로 사이에 위상 지연선로를 삽입하여 전체적으로 $90^{\circ}$보다 작게 결합기를 구현했고, 일반적인 전송선로의 특성을 특정 주파수 내에서 만족하는 인공전송선로를 이용하여 결합기에 위상 지연선로를 구성함으로써 물리적 크기를 감소시켰다. 중심주파수 700 MHz에서 -10 dB의 결합량 특성을 갖는 방향성 결합기를 설계 및 제작, 측정하였다. 측정된 결과는 기존 결합기와 비슷한 성능을 보였다. 반면, 제작한 결합기의 결합선로는 기존 결합기의 약 45% 크기를 가지고 있다.

• ETRI Journal
• /
• 제27권6호
• /
• pp.697-707
• /
• 2005

This paper proposes a new design of directional couplers with high directivity for personal communication services (PCS) and International Mobile Telecommunications-2000 (IMT-2000). The directional coupler is used to check and verify the power, frequency, and antenna reflection of a signal at transmission stations for mobile communications. The performance requirements of directional couplers are a strong coupling to reduce the effect on the transmitted power and high directivity to suppress the interference of the reflected signals and reduce the errors in communication. So far, various architectures have been proposed to gain high directivity, and there have been many studies used to obtain a strong coupling. However, conventional architectures for high directivity and strong coupling have a directivity of only about 20 dB, and there have been difficulties to achieve the higher directivity of 30 dB suitable for PCS and IMT-2000. This paper proposes a new architecture of directional couplers based on a grounding composed of strip lines, and compares the test results of this directional coupler with conventional ones. The results show that the proposed directional coupler has a directivity of more than 30 dB and is adequate for PCS and IMT-2000.