• 터널과지하공간
• /
• 제15권6호
• /
• pp.391-399
• /
• 2005

본 연구에서는 횡등방성 암반에서 이방성 정도에 따른 응력 차와 3차원 주응력 하의 터널방향, 이방성 정도에 따른 터널 단면에서의 2차원 응력 차를 이론적으로 구하였다. 구해진 응력상황 하의 터널에 대하여 $FLAC^{2D}$를 이용하여 이방성 고려여부에 따른 천단, 측벽, 바닥의 응력 차를 비교${\cdot}$검토하였다. 그 결과 이방성을 무시할 경우 응력 조건에 무관하게 주응력의 크기와 방향이 다르게 나타나며, 이방성 정도가 커질수록 응력차가 증가함을 알 수 있다. 이방성의 방향에 따라 응력 차가 달리 나타나며, 특히 이방성의 방향이 x축으로부터 시계반대방향으로 $45^{\circ}$와 $135^{\circ}$에서 가장 큰 응력 차가 발생함을 확인하였다.

• Macromolecular Research
• /
• 제8권6호
• /
• pp.268-275
• /
• 2000

After imposing a large pre-strain, anisotropy increases with increasing residual extension ratio. Gums have very low residual extension ratio and exhibit little anisotropy, while black filled SBR and especially sulfur-cured carbon black filled NR have large set and anisotropy. For carbon black filled rubber, samples subjected to tensile loading in perpendicular to the pre-strain direction have the same stress-strain curves shape as the sample without pre-strain (=isotropic samples), but slightly lower modulus. However, compared to isotropic or perpendicular directional samples to pre-strain direction, samples subjected to tensile loading in parallel to the pre-strain direction show low stress at low deformation, but have high stiffness at high deformation. Normalized anisotropy changes with strain. The normalized anisotropy for various deformations is a linear function of residual extension ratio.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1070-1077
• /
• 2011

This study intends to assess the defect in the weld zone of titanium grade 2 plate in terms of acoustical anisotropy based on the angle beam method. Depending on the rolling direction, the ratio of wave velocity was found to be 1.08 and the difference in the angle of refraction was more than seven degrees, confirming the presence of acoustical anisotropy. Thus for measuring the length of defect in the weld zone of the titanium plate (thickness of 10mm), the distance amplitude characteristics curves of titanium, TDACC-R and TDACC-T were constructed for the measurements in consideration of the acoustical anisotropy on CRT of the ultrasonic testing equipment. As a result, when the distance amplitude characteristics curve corresponds to the rolling direction, the length of defect was close to the actual measurement within 1mm and when different, the difference was found to be over 4mm. It was affirmed that the acoustical anisotropy should be taken into consideration when measuring the length of defects in the weld zone of the titanium plate with the presence of acoustical anisotropy.

• Journal of Welding and Joining
• /
• 제23권5호
• /
• pp.20-24
• /
• 2005

Due to the difficulties associated with the supply of steel plates, hot rolled coil (Steel grade: SM490A) is considered fur structural materials in replace of the existing SWS50A-M1. However, it is found that SM490A exhibits a significant anisotropy in terms of impact energy with respect to transverse and longitudinal directions. In this study, an experimental investigation is carried out to examine the relationship between the anisotropy in impact values and the fatigue strengths of SM490A with respect to the rolling direction of test specimens. All test specimens failed around 1,500,000 cycles regardless of the test specimen direction. Therefore, it is found that the anisotropy in impact energy is not related to the fatigue strength of the materials considered in this study. However, the transverse direction specimen showed more rapid brittle fracture mode compared to that of longitudinal direction specimen, and this appears to be related to the lower impact values in transverse direction.

• 소성∙가공
• /
• 제10권2호
• /
• pp.160-166
• /
• 2001

Uniaxial necking is studied for steel sheets with initial anisotropy. The state of anisotropy is continuously altered by subsequent tensile deformation at angles to the rolling direction. The orientations of orthotropy axes are changed before the onset of necking. A simple hardening rule which incorporates the rotations of orthtropy axes is proposed and the necking strains are predicted at angles to the rolling direction. Predicted results show good agreement with the experiments.

• 소성∙가공
• /
• 제27권5호
• /
• pp.301-313
• /
• 2018

In this paper, tensile test was performed on pure titanium sheet (CP Ti sheet) with HCP structure in each direction to evaluate mechanical and surface properties and analyze microstructural changes during plastic deformation. We also evaluated forming limits of Ti direction in dome-type punch stretching test using a non-contact three-dimensional optical measurement system. As a result, it was revealed the pure titanium sheet has strong anisotropic property in yield stress, stress-strain curve and anisotropy coefficient according to direction. It was revealed that twinning occurred when the pure titanium sheet was plastic deformed, and tendency depends differently on direction and deformation mode. Moreover, this seems to affect the physical properties and deformation of the material. In addition, it was revealed the pure titanium sheet had different surface roughness changes in 0 degree direction and 90 degree direction due to large difference of anisotropy, and this affects the forming limit. It was revealed the forming limit of each direction obtained through the punch stretching test gave higher value in 90 degree direction compared with forming limit in 0 degree direction.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.6-11
• /
• 2016

The magnetic anisotropy energy (MAE) and the saturation magnetization $B_s$ of (110) $Fe_nCo_n$ heterostructures with n = 1, 2, and 3 are investigated in first-principles within the density functional theory by using the precise full-potential linearized augmented plane wave (FLAPW) method. We compare the results employing two different exchange correlation potentials, that is, the local density approximation (LDA) and the generalized gradient approximation (GGA), and include the spin-orbit coupling interaction of the valence states in the second variational way. The MAE is found to be enhanced significantly compared to those of bulk Fe and Co and the magnetic easy axis is in-plane in agreement with experiment. Also the MAE exhibits the in-plane angle dependence with a two-fold anisotropy showing that the $[1{\overline{I}}0]$ direction is the most favored spin direction. We found that as the periodicity increases, (i) the saturation magnetization $B_s$ decreases due to the reduced magnetic moment of Fe far from the interface, (ii) the strength of in-plane preference of spin direction increases yielding enhancement of MAE, and (iii) the volume anisotropy coefficient decreases because the volume increase outdo the MAE enhancement.

• 한국자기학회지
• /
• 제12권2호
• /
• pp.46-50
• /
• 2002

110$\AA$ 두께의 Mumetal 박막을 자기장하에서 기판온도를 변화시키면서 제작하고, 고진공 분위기에서 자기장중 열처리를 수행하였다. 박막에 유도되는 자기이방성은 인가자기장 방향에서 30$^{\circ}$간격으로 180$^{\circ}$까지 자기이력곡선을 측정하여 조사하였다. 기판 온도가 증가할수록 용이축 방향의 보자력은 감소하였으나 일축이방성은 인가자기장 방향에서 벗어났다. 20$0^{\circ}C$에서 한 시간 동안 자기장중 열처리를 수행하면 기판온도에 상관없이 일축이방성이 향상되었다. 기판온도가 5$0^{\circ}C$ 이하일때 4.3 Oe의 이방성 자기장을 나타냈으며 기판온도가 증가할수록 이방성 자기장은 감소하였다. Mumetal 박막의 일축이방성은 열처리 전후 모두 5$0^{\circ}C$에서 가장 잘 유도되었다.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1103-1109
• /
• 2011

This research quantitatively confirmed an acoustical anisotropy that exists in a pure titanium plate from the signal of ultrasonic flow detection and suggested a new way to evaluate the acoustical anisotropy by inputting acquired characteristic of ultrasound signal into the neutral network. Using the fact with the suggested method that the characteristic of ultrasound signal is shown differently depending on the pure titanium plate's rolling direction, the neural network was constructed by extracting the characteristic that can decide each direction of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ with waveform analysis program. As a result of inputting the characteristic of ultrasound signal acquired from a random rolling direction into the neural network that was built like this, it showed a pattern recognition rate higher than 95% on directions of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$.

• 지구물리
• /
• 제2권3호
• /
• pp.169-178
• /
• 1999

하동-산청지역의 회장암질암에 대한 대자율 비등방성(AMS: anisotropy of magnetic susceptibility) 연구를 실시한 결과 5개 지점에서 지구조적 응력에 의한 자기적 엽리구조가, 6개 지점에서 흐름에 의한 자기적 선구조가 판별되었다. 자기적 엽리구조는 NW-SE방향의 압축력을 지시하며, 이는 회장암이 형성된 후, 후차적으로 작용되었던 것으로 판단된다. 이는 회장암질암 주변의 편마암류에서도 NE-SW방향의 엽리가 나타나는 사실로도 설명된다. 즉, 이들 변성암에 작용하였던 압축력은 회장암질암에도 함께 작용하였던 것이다. 등온잔류자기(IRM) 획득실험 결과, 이들 자기적 구조가 관찰되는 지점들에서의 주자성광물은 티탄자철석계열 광물이며, 일부 시료에는 소량의 적철석이 포함되어 있는 것으로 판단된다.