• The KSFM Journal of Fluid Machinery
• /
• v.18 no.5
• /
• pp.49-53
• /
• 2015

Thrust vector control is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. TVC of the tapered ramp tabs has the potential to produce both large axial thrust and high lateral force. We have conducted the experimental research and flow analysis of ramp tabs to show the performance and the structural integrity of the TVC. The experiments are carried out with the supersonic cold flow system and the schlieren graph. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• Journal of Plant Biotechnology
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2005

Many cloning vectors in which cDNAs can be inserted to the sense orientation have been developed. Uni-ZAP XR vector (Stratagene) should contain clones that are oriented to sense direction with respect to T3 RNA polymerase primer. Unexpectedly, large portions of cDNAs in Chinese cabbage cDNA library showed unusual insertions, antisense orientation and a hybrid of two different clones. Using two clones, 4H03 and 53-B10, derived from different cDNA libraries, we proposed and demonstrated the possibility of unusual-construct formation by in vitro translation and northern blot analysis. The 4H03 clone was inserted with inverse direction, and its transcript and translation product could be produced by T7 RNA polymerase, indicating that this clone is definitely inserted into inverse orientation. The 53-B10 that contains two independent genes was turned out to be a hybrid in which two genes are inserted to opposite direction each other. All unusual constructs might be due to the presence of small fragments of DNA, like adapter. However, the mechanism underlined the formation of unusual constructs is still remain to be solved.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.3 no.3
• /
• pp.14-26
• /
• 2015

A wind speed forecast is a crucial and sophisticated task in a wind farm for planning turbines and corresponds to an estimate of the expected production of one or more wind turbines in the near future. By production is often meant available power for wind farm considered (with units KW or MW depending on both the wind speed and direction. Such forecasts can also be expressed in terms of energy, by integrating power production over each time interval. In this study, we technically focused on mathematical modeling of wind speed and direction forecast based on locally data set gathered from Aghdasiyeh station in Tehran. The methodology is set on using most common techniques derived from literature review. Hence we applied the most sophisticated forecasting methods to embed seasonality, trend, and irregular pattern for wind speed as an angular variables. Through this research, we carried out the most common techniques such as the Box and Jenkins family, VARMA, the component method, the Weibull function and the Fourier series. Finally, the best fit for each forecasting method validated statistically based on white noise properties and the final comparisons using residual standard errors and mean absolute deviation from real data.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.151-158
• /
• 2006

Highly accurate surface velocity estimation using modern geodetic techniques plays very important role in the geological and geophysical interpretation. Researches with GPS are ongoing in many countries of the world. This study aims to estimate the amount of crustal deformation and the direction of deformation in the Korean Peninsula and in its neighbor. We used GAMIT that is a comprehensive GPS analysis package developed at MIT. Then, a Global Kalman filter called GLOBK is used to combine the results from GAMIT and to estimate the relative and absolute velocity vector for the crustal deformations. To estimate station velocity accuracy and reliably, it is extremely important to pay great attention to the reference frame. Firstly, using the Suwon (SUWN) of Eurasian plate as main frame, we estimate the relative amount of crustal deformation and a direction of Eurasian plate and North American plate, Secondly, using ITRF 2000 as main frame, we estimate the absolute crustal deformation of Eurasian plate and North American plate. The continent of Eurasian where has the Korean Peninsula deforms 33.36 mm per year to East-Southeast (ESE), and Japanese Tsukuba (TSKB) in North American plate deforms to South-Southwest (SSW). Finally, the Korean Peninsula is approaching the Japanese Island and the rate of horizontal crustal deformation between the Suwon and the Tsukuba is about 31.98 mm per year in the moving direction of N85.9oW (274.1o) for the past three years.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1165-1171
• /
• 2022

Human behavior recognition using an accelerometer has been applied to various fields. As smartphones have become used commonly, a method for human behavior recognition using the acceleration sensor built into the smartphone is being studied. In the case of the elderly, falling often leads to serious injuries, and falls are one of the major causes of accidents at construction fields. In this article, we proposed recognition method for human falling direction using built-in acceleration sensor and orientation sensor in the smartphone. In the past, it was a common method to use the magnitude of the acceleration vector to recognize human behavior. These days, deep learning has been actively studied and applied to various areas. In this article, we propose a method for recognizing the direction of human falling by applying the deep learning multilayer technique, which has been widely used recently.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.2
• /
• pp.39-49
• /
• 2000

In this paper, we propose an optimizing feature extraction method for multiclass problems assuming normal distributions. Initially, We start with an arbitrary feature vector Assuming that the feature vector is used for classification, we compute the classification error Then we move the feature vector slightly in the direction so that classification error decreases most rapidly This can be done by taking gradient We propose two search methods, sequential search and global search In the sequential search, an additional feature vector is selected so that it provides the best accuracy along with the already chosen feature vectors In the global search, we are not constrained to use the chosen feature vectors Experimental results show that the proposed algorithm provides a favorable performance.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.155-163
• /
• 2018

This study examined methods to enhance navigation performance and reduce the divergence of navigation solutions that may occur in the event of global positioning system (GPS) failure by integrating the GPS/inertial navigation system (INS) with the three-dimensional (3D) magnetic vector measurements of a magnetometer. A magnetic heading aiding method that employs a magnetometer has been widely used to enhance the heading performance in low-cost GPS/INS navigation systems with insufficient observability. However, in the case of GPS failure, wrong heading information may further accelerate the divergence of the navigation solution. In this study, a method of integrating the 3D magnetic vector measurements of a magnetometer is proposed as a countermeasure for the case where the GPS fails. As the proposed method does not require attitude information for integration unlike the existing magnetic heading aiding method, it is applicable even in case of GPS failure. In addition, the existing magnetic heading aiding method utilizes only one-dimensional information in the heading direction, whereas the proposed method uses the two-dimensional attitude information of the magnetic vector, thus improving the observability of the system. To confirm the effect of the proposed method, simulation was performed for the normal operation and failure situation of GPS. The result confirmed that the proposed method improved the accuracy of the navigation solution and reduced the divergence speed of the navigation solution in the case of GPS failure, as compared with that of the existing method.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.395-402
• /
• 2016

In this paper, a wideband adaptive beamforming approach for an acoustic vector sensor linear array is presented. It is a very important issue to estimate the stable covariance matrix for adaptive beamforming. In the conventional wideband adaptive beamforming based on coherent signal-subspace (CSS) processing, the error of bearing estimates is resulted from the focusing matrix estimation and the large number of data snapshot is necessary. To alleviate the estimation error and snapshot deficiency in estimating covariance matrix, the steered covariance matrix method in the pressure sensor is extended to the vector sensor array, and the subarray technique is incorporated. By this technique, more accurate azimuth estimates and a stable covariance matrix can be obtained with a small number of data snapshot. Through simulation, the azimuth estimation performance of the proposed beamforming method and a wideband adaptive beamforming based on CSS processing are assessed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.47-52
• /
• 2003

Change detection and analysis is a powerful application of remote sensing, in that the spectral resolution of multi-band sensors can be used to advantage in monitoring both significant and subtle land cover changes over time. In this study, the LANDSAT TM data was used to detect the change areas affected by flood from a heavy rainfall. The study area is the Nakdong River located in the Korea peninsular. Among the several change detection techniques, change vector analysis(CVA), principle component analysis(PCA) and image difference approach are utilized in this paper. CVA uses any number of spectral bands from multi-date satellite data to produce change image that yield information of the magnitude and direction of differences pixel values. And accuracy assessment was carried out with a change image produced from three techniques. In result, CVA was found to be the most accurate for detecting areas affected by flood. CVA with the overall accuracy and Kappa coefficient of 97.27 percent and 94.45 percent, respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.22-31
• /
• 2001

The purpose of this study is to compare calculated pollutant loadings using pollutant load unit factors and vector type coverage, and expected mean concentration(EMC) and raster type of digital elevation model(DEM). This study is also focusing on comparison of the advantages and the disadvantages of the two methods, and seeking for a method of calculation of pollutant loadings using DEM. Estimation of pollutant inputs using pollutant load unit factors has limitations in identifying seasonal variations of pollutant loadings. Seasonal changes of runoffs should be considered in the calculation of pollutant loadings from catchments into reservoirs. Evaluation of pollutant inputs using runoff-coefficient and EMC can overcome these drawbacks. Proper EMC and runoff-coefficient values for the Koeup stream catchments of the Koheung estuarine lake were drawn from review of related papers. Arc/Info was employed to establish database of spatial and attribute data of point and non-point pollutant sources and characteristics of the catchments. ArcView was used to calculate point and non-point pollutant loadings. Pollutant loads estimated with either unit factors-coverages, i.e., pollutant load unit factors and vector coverages f point sources and land use, or EMC and digital elevation mode(DEM) were compared with stream monitoring loads. We have found that some differences were shown between monitoring results and estimated loads by Unit Factors-Coverage and EMC-DEM. Monthly variations of pollutant loads evaluated with EMC-DEM were similar to those with monitoring result. The method using EMC-DEM can calculate accumulated flows and pollutant loads and can be utilized to identify stream networks. A future research on correcting the difference between vector type stream using flow direction grid and digitalizing vector type should be conducted in order to obtain more exact calculation of pollutant loadings.