• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.81-89
• /
• 2008

This paper is results of investigating the dominant factors influencing to coefficient of consolidation in horizontal direction of Korean marine clays and their correlations through literature review. From the results of analyzing data obtained from field tests such as piezocone penetration and dilatometer tests as well as laboratory tests, coefficient of consolidation in the horizontal direction was found to increase with increase of stiffness index of soil while it decreases with the increase of dissipation time of pore pressure developed during field tests. In general, the coefficient of consolidation in the horizontal direction tends to increase with increase of undrained shear strength and preconsolidation pressure although correlation between them are relatively low. Friction ratio has a high correlation with coefficient of consolidation in the horizontal direction in case of friction ratio being greater than 1.0. For methods of estimating coefficient of consolidation in the horizontal direction with different testing device, values obtained from methods of P2-logt and DMT-A with dilatometer were quite similar to values from piezocone penetration test. Consistency of soil is quite proportional to coefficient of consolidation in the horizontal direction. Clear correlation between coefficients of consolidation in the horizontal and the vertical directions could not be found. coefficient of consolidation in the horizontal direction estimated from the results of field test tends to be 1.13~3.11 times greater than that obtained from laboratory tests.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.139-145
• /
• 2020

Purpose: This study is for the prosthesis of dog. Observed the occlusal relation between the small dog canine and carnassial teeth. The direction of the bite force was analyzed by 3D FEM(finite element method). Methods: The mandibular canine and carnassial of dog were tested. The skull of dog was contact point confirmed by dental CAD. The skull of dog was scaned using CT and a 3D model was created. The 3D model was analyzed ABAQUS. Closing movement has been 100N, 200N, 300N, 500N, 1000N, 1500N. The Direction of bite force was confirmed. Results: As occlusal force increased, the direction of bite force appeared to (-y), (-x,-y,-z), (-x,-y), (-x,-y,+z), (-x,-y,+ z), (+x,-y) in mandibular left canine. And the direction was seen at (+x, -y), (+x,-y,-z), (+x,-y), (-x,-y,+z), (-x,-y,+z), (+x,-y). When the occlusal load is 100 N, 200 N, 300 N, 500 N, the direction of the mandibular carnassial appears as (-x, -y, -z), and when the occlusal load is 1000 N, 1500 N, the direction appears as (-x,-y). Conclusion: The mandibular canine showed irregularities in the coordinates of the direction of the bite force, and the mandibular carnassial showed regularity in the coordinates of the direction of the bite force.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.3
• /
• pp.29-35
• /
• 2013

Purpose : To offer coupled motion caused by sidebending in the extension postures in lumbar spine in the football, baseball players and general students. Method : Coupled motion were analysed by three dimensional motion analyser in the sitting position during lateral bending. Result : Regardless of the direction of sidebending at L1-L3, L5-S2 in the extension posture of the lumbar spine, the direction of coupled motion in the baseball and football players were opposite to the direction of sidebending but the direction of coupled motion was same at L3-L5. while, the direction of sidebending at L1-L3, L3-L5 in the extension posture of the lumbar spine, the direction of coupled motion in the general students were same to the direction of sidebending but, the direction of coupled motion was opposite direction at L5-S2. Conclusion : we found a difference of coupled motion between athletes and non-athletes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.544-550
• /
• 2014

In this paper, we have proposed a novel method which can analysis the direction finding ambiguity analysis for array geometry in 3 channel and 4 channel multiple baseline direction finding system. Generally, the direction finding ambiguity in the 3 element and 4 element phase interferometer direction finding system is calculated by the simulation for the array spacing or by the probability with the selected antenna array spacing. There are some restrictions to obtain the ambiguity of direction finding system in these methods. The former performs a simulation with every antenna array spacing and the latter calculates the ambiguity with the selected antenna array spacing. To overcome those restrictions, This paper proposed the novel method to calculate the ambiguity using the imaginary antenna array spacing and the phase difference prior to the modular operation in direction finder. Using the proposed method, we obtain the ambiguity probability for each of array geometry composed of multiple baseline. After performing the simulation with the selected antenna array spacing to verify the proposed method, we compared the calculated result data with the simulation data.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.7
• /
• pp.632-638
• /
• 2004

In order to evaluate the effect of blasting vibration in buildings and it's resident located around blasting construction field in urban area, blasting vibration characteristics were measured by the vibration level, vibration velocity. The 250g and 750g of charged powder were used at the apartment and at the ground, respectively. In the measurement of the ground, 2 (perpendicularity) axis was the highest value in vibration level, but vertical direction was the highest value at 25 m point and longitudinal direction was the highest value at 50 m point in vibration velocity. The amount of measurement was high value when measuring point is higher than blasting source, while that of measurement was low value when measuring point is lower than blasting source. In the measurement of the apartment, Z axis was the highest value in vibration level, but in vibration velocity transverse direction was the highest value at ground, was vertical direction at 1st floor, was longitudinal direction at 3rd floor and was vertical and longitudinal direction at 5th floor. The vibration level and the vibration velocity of 50 m point showed higher correlation value than 25 m point at the ground, but those of 25 m point showed higher correlation value than 50 m point at the apartment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.325-325
• /
• 2018

The main purpose of this study is to suggest the more reliable flow direction methods within the framework of DEM by investigating the existing methodologies. To this end SFD(single flow direction method), MFD(multiple flow direction method) and IFD(Infinite flow direction method) are applied to determination of flow direction for water particles in Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation. As the main results the different patterns of flow accumulation are found out from each application of flow direction methods. As the flow dispersion increases on DEM contributing areas to outlet grow in sequence of SFD, IFD, MFD but contribution of individual pixels into outlet decreases. Especially MFD and IFD tend to make additional hydrologic abstraction from rainfall excess due to the flow dispersion within flow paths on DEM. Based on parameter estimation for power law distribution by maximum likelihood flow accumulation can be thought of as scale invariance factor. Combination of several flow direction methods could give rise to the more realistic water flow on DEM through separate treatment of flow direction methods for dispersion and aggregation effects of water flow within different topographies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.290-299
• /
• 2019

Direction-finding equipment with multiple antennas are used to estimate the direction of a signal emitted by a source; they can be used to rescue a victim or locate a specified source. During direction finding, reflection waves are present and signal distortion is observed depending on the external shape and material of a system that incorporates the direction-finding equipment and multiple antennas. Therefore, to accurately estimate the azimuth of the signal source and develop the direction-finding equipment, a calibration should be performed to reflect the influence of the antenna arrangement(layout) and system contour. In this paper, we describe an in-flight calibration method to develop direction-finding equipment to locate communication signals using an aviation system, and we analyze the direction-finding performance when applying phase calibration data obtained through the in-flight calibration.

• Journal of Forest and Environmental Science
• /
• v.39 no.4
• /
• pp.203-212
• /
• 2023

Directional felling is a felling method practised by the Forestry Department in Peninsular Malaysia as prescribed in Field Work Manual (1997) for Selective Management Systems (SMS) in forest harvesting. Determining the direction of tree felling in Peninsular Malaysia is conducted during the pre-felling inventory 1 to 2 years before the felling operation. This study aimed to predict and analyze the direction of tree felling using the vector-based path distance back link method in Geographic Information Systems (GIS) and compare it with the felling direction observed on the ground. The study area is at Balah Forest Reserve, Kelantan, Peninsular Malaysia. A Path Distance Back Link (spatial analyst) function in ArcGIS Pro 3.0 was used in predicting tree felling direction. Meanwhile, a binary classification was used to compare the felling direction estimated using GIS and the tree felling direction observed on the ground. Results revealed that 61.3% of 31 trees predicted using the vector-based projection method were similar to the felling direction observed on the ground. It is important to note that dynamic changes of natural constraints might occur in the middle of tree felling operation, such as weather problems, wind speed, and unpredicted tree falling direction.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.307-313
• /
• 2013

This paper presents a simulation for passenger ship evacuation considering determination of evacuating direction based on walking direction potential function. In order to determine walking direction of a passenger, his/her position in two dimensional plane was adopted as a design variable, and fixed boundaries such as walls and obstacles were adopted as constraints. To solve this optimum problem, a walking direction potential function was adopted as an objective function. This potential function was configured as a kind of penalty function and it contained two components. One is a potential function concerned with the distance to the destination, and other is a potential function based on the effect of walls and obstacles. To determine evacuating direction, this problem was solved by minimizing the walking direction potential function every unit time during the simulation. The crowd behavior of the passenger consisted of the flock behavior, a form of collective behavior of a large number of interacting passengers with a common group. With the proposed algorithm, the test problems in International Maritime Organization, Maritime Safety Committee/Circulation 1238(IMO MSC/Circ.1238) were implemented and the direction of passengers and total evacuation time was analyzed.

• Journal of architectural history
• /
• v.18 no.3
• /
• pp.27-44
• /
• 2009

In Korea, the direction of houses are typically determined by considering the directional orientation and shape of the mountain range rather than ignoring the geographical feature of the mountain range. Traditional villages of Korea are known to have very particular ways of adopting the geomantic surroundings of natural environment. This is very true especially have a high mountain in the back and a lower mountain in front. At the same time, most of the houses tend to prefer south as a man direction so that they can receive more sun light. However, if the mountain range faces north, it will not be easy to determine the directional orientation of houses. This paper, therefore, tries to identify how the houses of villages facing north, direst the orientation. This, the northern village, solves the problem by facing all direction rather than one major direction. The houses of the villages facing north, tend to revise the direction by changing the back mountain(주산) or front mountain(인산) that helps them change the direction towards he range of eastern or western direction. As a result, the houses tend to the direction towards east and wes compared to north and south. The directional orientation of houses was clearly distributed or concentrated by depending of the shape and directional orientation of the mountain range. This kind of research let us know the relationship between the natural north direction, the direction of geomantic surrounding, and the direction of houses in traditional Korean villages.