• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.220-224
• /
• 1999

Sliding wear test was employed to determine the effect of whisker content and orientation on the firiction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were prepared by a modified tape casting followed by lamination, binder removal and hot pressing in order to align the whiskers in the tape casting direction. Wear coefficients on three directions were measured; parallel and normal to the tape casting direction on the tape casting surface and normal to lamination direction on surfnce normal to the tape casting direction. In the effect of whisker orientation, the highest wear rate was obtained in the direction parallel tape casting direction and the lowest in the direction normal to lamination direction at all temperatures. Silicon oxide layer amoothing the surface was detected by energy dispersive X-ray analysis on the worn surface.

• 한국응급구조학회지
• /
• 제11권3호
• /
• pp.111-118
• /
• 2007

Purpose : It was to present strategies on activation of prehospital medical direction in Korea. Methods : This study was conducted by analysing some papers on prehospital medical direction and statistical data from the National Emergency Management Agency. Results : There was no active application of medical direction methods such as Priority Dispatch System, Pre-Arrival Instructions, System Status Management and no data on prehospital medical direction. To estimate direct medical control on emergency patients who were sorted by EMTs in 2006 was only 2.5%. Conclusion : To improve prehospital medical direction, it needed to applicate data collecting & using system and in-direct & direct medical control by medical doctor.

• 한국응급구조학회지
• /
• 제12권2호
• /
• pp.37-43
• /
• 2008

Purpose : It was to improve medical direction system through presenting need of doctor and paramedic in Korean Fire Service. Methods : This study was conducted by applying demand coefficients(4 for doctor, 3 or 4.5 for paramedic) to some data on medical director, paramedic, ambulance from National Emergency Management Agency. Results : Number of medical director & paramedic were 4 & 1,217. Number of necessary doctor for medical direction was 64 or 28(in case of direct medical direction) & 16 or 7(in case of indirect medical direction). Number of necessary paramedic for direct medical direction was 492(in case of 35% ALS ambulance) & 1,062(in case of 50% ALS ambulance). Conclusions : To improve quality & efficiency of medical direction brought up need of amendment of the Emergency Medical Services Act to apply indirect medical control such as standing orders, protocol, case review.

• 한국농촌건축학회논문집
• /
• 제11권3호
• /
• pp.45-52
• /
• 2009

This study is about the co-relationship between the directional orientation of the houses and the geometric direction in the Korean traditional villages. The major mountain in the back of the village and the front mountain ranges give the most important influence for the direction of the houses. This paper, therefore, tries to identify how the houses of villages facing South-west direct the orientation. The village, where the natural environment face the South-west village, solves the problem by facing major direction rather than one all direction. All houses observe and respect the circumstance of geomantic surrounding to the extant that almost no houses revise its direction without any geomantic reference. This kind of research let us know the relationship between the natural direction, the direction of geomantic surrounding, and the direction of houses in traditional Korean villages.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 추계학술대회
• /
• pp.204-208
• /
• 2011

This paper proposes a novel deinterlacing algorithm using neighboring deinterlacing pixels directions weight, which can obtain the true deinterlacing direction of the interpolated pixel. The proposed algorithm determines the direction of the current interpolated pixel using MELA direction determination method. To obtain more accurate deinterlacing direction and increase interpolation direction correlation, the directions of neighboring pixels around the current interpolated pixel are considered. The current direction and the neighboring majority direction are compared to decide an interpolated method. But it cost slightly CPU time increasing since neighboring pixels directions determination and statistics. Experimental results demonstrate that the proposed algorithm outperforms the conventional deinterlacing methods.

• 한국CDE학회논문집
• /
• 제18권6호
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.129-138
• /
• 2007

Recently, Direction Finding(DF) System is using switching DF algorithm to reduce system-weight by eliminating RF cable as much as possible. Also, Correlation Vector Direction Finding(CVDF) algorithms is being used for Fast Direction finding in tactical environment. In this paper, I will give you burst error elimination algorithms and compare the performance in case we use switching CVDF algorithm. Although antenna array is not working, we will successfully perform direction finding when we use this burst error elimination algorithms. Also, we will be completely capable of DF mission despite of meeting the unwanted situation that the monitoring signal disappear in case we use Switching Direction Finding algorithms. That situation frequently occurs under the Frequency Hopping signal circumstances.

• 비교문화연구
• /
• 제39권
• /
• pp.177-190
• /
• 2015

This study investigates the difference of the cognitive approach of Korean and Chines of the space direction that modern Chinese space phrase 'N+shang'. For this, we defined the spatial meaning of the noun 'N' and space noun 'shang' then investigate the conditions when 'N+shang' means 'the substance interior direction' and 'the substance exterior direction'. Also via 'lou+shang', we conducted the survey to Korean and Chinese students in order to see the what kind of cognitive differences be shown when they approach and translate the space direction of 'N+shang' structure. As a result of the survey, we were able to find cultural difference of spatial approach of 'N+shang' between these two countries, Korean select the cognitive inference path; from the substance external direction to internal direction while Chinese select from internal to external.

• 산업기술연구
• /
• 제28권B호
• /
• pp.71-79
• /
• 2008

Reports about coefficients of consolidation in horizontal direction of marine clays located at seven different sites on western and southern coast area in Korea were reviewed and characteristics of them were investigated. As results of analyses, for relation between the depth of ground and coefficients, any trend and correlation between them can not be found since they are more influenced by the nature of geological formation rather than the depth of ground. Dissipation time t50, one of important factors in estimating value of coefficient of consolidation in horizontal direction, was found to be quite related to them. For the correlation between the maximum pore pressure developed and coefficients, coefficient of consolidation in the horizontal direction tend to decrease with increase of the maximum pore pressure whereas the ground water level or static pore pressure do not have any specific correlation with those coefficients. Values of coefficient tends to increase with values of liquid limit, plastic limit and plastic index and thus they are found to be directly influenced by the contents of fines. Values of coefficient of consolidation in horizontal direction are also increased with increases of permeability in horizontal direction and coefficient of consolidation in vertical direction. They were highly correlated between coefficient of consolidation and permeability in horizontal direction while values of coefficient of consolidation in horizontal direction have a relatively low correlation with values of coefficient of consolidation in horizontal direction. Sometimes, coefficient of consolidation in horizontal direction obtained from field tests were estimated 2-3 times greater than those from laboratory tests.

• 소성∙가공
• /
• 제27권5호
• /
• pp.301-313
• /
• 2018

In this paper, tensile test was performed on pure titanium sheet (CP Ti sheet) with HCP structure in each direction to evaluate mechanical and surface properties and analyze microstructural changes during plastic deformation. We also evaluated forming limits of Ti direction in dome-type punch stretching test using a non-contact three-dimensional optical measurement system. As a result, it was revealed the pure titanium sheet has strong anisotropic property in yield stress, stress-strain curve and anisotropy coefficient according to direction. It was revealed that twinning occurred when the pure titanium sheet was plastic deformed, and tendency depends differently on direction and deformation mode. Moreover, this seems to affect the physical properties and deformation of the material. In addition, it was revealed the pure titanium sheet had different surface roughness changes in 0 degree direction and 90 degree direction due to large difference of anisotropy, and this affects the forming limit. It was revealed the forming limit of each direction obtained through the punch stretching test gave higher value in 90 degree direction compared with forming limit in 0 degree direction.