• Journal of the Korean Data and Information Science Society
• /
• v.6 no.2
• /
• pp.51-62
• /
• 1995

As a result of the transfer function analysis on the casual relationship between Andong Dam water level and fog time in Andong City from March of 1981 to December of 1992, it should be referring to monthly increases in the water level having an effect on 0.89 hour per m increases in the fog time with 4 months delay. It is evident, hence, the artificial lake of the dam is one of the direct causes of fog. Based upon this objective evidence, water resources development policy and dam managment policy must be formulated.

• Journal of Aquaculture
• /
• v.12 no.4
• /
• pp.275-281
• /
• 1999

The utility of RSV-LTR and carp beta-actin promoters was evaluated in a marine flatfish species, Limanda Yokohamae by examining successful expression of transgenic DNA in muscles (transfected by direct injection) and in early embryos (transformed by lipofected sperm). The expressed pattern of injected DNA in skeletal muscles was dependent on the DNA amount injected. The activity reached to maximal level at 48 hours post injection, and persisted up ot 1 month transiently. Gene transfer into early embryo of this species was successfully achieved using lipofected sperm with the efficiency ranging 36.8% to 48.1%. The expression of transgene during embryonic development was shown as stage-specific and transient.

• Laser Solutions
• /
• v.2 no.3
• /
• pp.52-61
• /
• 1999

The laser induced forward transfer(LIFT) technique employs a pulsed laser to transfer parts of a thin metal film from an optically transparent target onto an arbitrary substrate in close proximity to the metal film on the target. In this work, a two-step method, the combination of LIFT process, in which a Au film deposited on the $Al_2$O$_3$ substrate by Nd:YAG laser and subsequent Au electroless metal plating on the by LIFT process generated Au seed, was presented. The influence of laser parameters, wavelength, laser power, film thickness and overlap ratio of pulse tracks, on the shapes of deposit and conductor line after electroless plating is experimentally studied. As a results, the threshold power densities for ablation, deposition and metallization were determined and comparison of threshold value between the wave length 1064nm and the second harmonic generated 532nm. In odor to determine a possible application in the electronic industry, a smallest conduct spot size, line width and isolated line space were generated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.284-284
• /
• 2010

We report a fabrication of 6, 13-bis(triisopropylsilylethynyl) (TIPS) pentacene nanowires that made on Si substrates by liquid bridge-nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the TIPS-pentacene nanowire and the Si substrate. The patterned TIPS-Pentacene nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM) and electrical properties.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.107-107
• /
• 1999

Direct-contact condensation experiments of atmospheric steam and steam/air mixture on subcooled water flowing co-currently in a rectangular channel are carried out uszng an infrared thermal camera system to develop a temperature measurement method. The inframetrics Model 760 Infrared Thermal Imaging Radiometer is used for the measurement of the temperature field of the water film for various flow conditions. The local heat transfer coefficient is calculated using the bulk temperature gradient along the (low direction. It is also found that the temperature profiles can be used to understand the interfacial condensation heat transfer characteristics according to the flow conditions such as noncondensable gas effects, inclination effect, and flow rates.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.4
• /
• pp.316-326
• /
• 1990

The measurements of heat transfer and pressure drop were performed on ripple tube with air flow. The results with the tube were compared with the performance of smooth tube. The enhancements in heat transfer coefficient for ripple tube, being compared with smooth tube, was ranged from 7.4 to 39 percent. The local Nusselt number for the inner fin tube, being compared with that for smooth tube, varied from 7.4% to 39%, while the corresponding increase in friction factors were 4.1 to 8.1%. One of the most direct indications of Nusselt number of ripple tube is given as following equation: $$Nu=0.061Re^{0.75}Pr^{0.4}(Tb/Tw)^{0.5}$$ We can see that Nusselt number for ripple tube in this experiment is consistent with the theoretical one taken from Walkinson's equation at Reynolds number range from 8,000 to 20,000.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.845-850
• /
• 2000

This paper presents the results of tests performed on the transfer girders which have been generally used between upper walls and lower frames in the hybrid structures. The 8 specimens were designed using (1) ACI method, (2) strut-tie model, and (3) X-type shear reinforcement cage. The capacities of the specimens are in general larger than the design values except the one designed according to strut-tie model. The reason for this difference seems to be due to the arbitrary allocation of transferred shear force to the path of direct compression strut and the path of indirect strut and tie. The failure modes turn out toe be (1) shear failure at critical shear zone, (2) compressive concrete crushing in the diagonal strut in the shear zone of transfer girder, and (3) compressive concrete crushing in the corner of upper wall.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.959-961
• /
• 2003

In this paper, we describe implemented DMAC (Direct Memory Access Controller) architecture on Altera's $Excalibur^{TM}$ that includes industry-standard $ARM922T^{TM}$ 32-bit RISC processor core operating at 200 MHz. We implemented DMAC based on AMBA (Advanced Micro-controller Bus Architecture) AHB (Advanced Micro-performance Bus) interface. Implemented DMAC has 8-channel and can extend supportable channel count according to user application. We used round-robin method for priority selection. Implemented DMAC supports data transfer between Memory-to-Memory, Memory-to-Peripheral and Peripheral-to-Memory. The max transfer count is 1024 per a time and it can support byte, half-word and word transfer according to AHB protocol (HSIZE signals). We implemented with VHDL and functional verification using $ModelSim^{TM}$. Then, we synthesized using $LeonardoSpectrum^{TM}$ with Altera $Excalibur^{TM}$ library. We did FPGA P&R and targeting using $Quartus^{TM}$. We can use implemented DMAC module at any system that needs high speed and broad bandwidth data transfers.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1807-1820
• /
• 2008

The station area development planed to improve the old and narrowed station and to enhance the train passenger's convenience through private capital attraction in the past. But it has been faced with difficulty for the creative of transfer demand. Because of lean upon building facilities were caused by shortage of business profitability as to development of the upside a railway line, and lack of public utilities. The station area development requires that it's trend to large scale development of station areas, korail's direct development, deputation of specialty company to development, collaboration between local government and korail in development, diversification of process & installed facility, building multi-transfer center and one-stop transfer system. This trend caused by low profitability in development of the upside a railway line. The purposes of study are to make the system and law reflected to the property of station area development, investment in kind of needed land, and change railroad areas to high-rise and complex development, and make a forum between government and korail, etc.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.111-115
• /
• 2006

To clarify the hydraulic and thermal characteristics of ice slurry which made from 6.5% ethylene glycol-water solution flow in the double tube and plate type heat exchanger, experimental studies were performed. The mass flux and Ice fraction of ice slurry were varied from 800 to $3,500 kg/m^2s$(or 7 to 17 kg/min) and from 0 to 25%, respectively. During the experiment, it was found that the measured pressure drop and heat transfer rate increase with the mass flux and ice fraction; however the effect of ice fraction appears not to be significant at high mass flux region. At the region of low mass flux, a sharp increase in the pressure drop and heat transfer rate were observed depends on mass flux.