• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.958-964
• /
• 1999

The distance in load parameter space to the closest saddle node bifurcation (CSNB) point provides the worst case power margin to voltage instability and the left eigenvector at CSNB identifies the most effective direction to steer the system to maximize voltage stability under contingency. This paper presents an improved direct method for computing CSNB: the order of nonlinear systems equations is reduced to about twice of the size of load flow equations in contrast to about three-times in Dobson's direct method; the initial guess for the direct method is computed efficiently and robustly by combined use of continuation power flow, a pair of multiple load flow solution with Lagrange interpolation. It is also shown that voltage stability may be enhanced significantly with shift of generations in the direction of the left eigenvector at CSNB.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.474-483
• /
• 1996

In this paper, as a part of the method improving stability, the load-flow calculation in D.C. power system and the models for stability analysis are studied with A.C-D.C. interconnected power systems transmission performed. Moreover, the theory is established in relation to each control method of D.C. power systems. Then the stability of A.C-D.C.interconnected power systems is compared and considered by the way of dividing the operating control method of the rectifier inverter converter into ACR-AVR, APR-A.gamma.R, A.alpha.R-ACR. The dynamics characteristic of terminal voltage, frequency, active-reactive power and rotor angle of the generator with disturbances and load fluctuations is considered. In addition, the characteristic of direct voltage, direct current, power and control systems. From this the comparative analysis of the direct current control method, the possibility of the stability analysis of A.C.-D.C. interconnected power system is considered. (author). refs., figs., tabs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.108-115
• /
• 2014

In this study, experimental approaching method was applied under and single-cylinder engine to research the performance of direct needle-driven piezo injector (DPI) for CR direct-injection. As key-point factor of this DPI that relies on direct-acting operating of injector needle, unlike conventional hydraulic-servo, its nozzle needle can be directly driven by piezo actuator. Thus, effect of direct-acting injection of DPI on diesel combustion and emission characteristics was investigated under common-rail single-cylinder direct-injection engine, equipped with three different driving mechanism, including indirect-acting solenoid, piezo and DPI system. As main results, it found that a direct-acting piezo injector has higher of IMEP. And it has higher heat release rate during premixed combustion and mixing controlled combustion phase due to its higher heat release, even though nitrogen oxide (NOx) formations were increased slightly.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.63-76
• /
• 1999

Internet-based electronic trade has been growing fast. But most users are not yet familiar with the system and find it very difficult to purchase and sell the products in the cyber market place. To handle these problems, agent-based virtual market place system has been proposed where agents instead of individuals participate in trading of goods. Most of the proposed models have been in the two general categories. The first is the direct transaction among sellers and buyers, and the second is the agent-based transaction. However, the transaction is not fair and the best deal can't be guaranteed for both models. In this paper, we propose a new broker based synchronous transaction algorithm which is fair to both parties and guarantees the best deal. Our algorithm is implemented using Visual C++ and the experimental results show that our method is better than the two traditional transaction models in every performance metrics, Number of transactions are increased up to 21% and price adjustment is up to 280% better for some transactions.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2403-2411
• /
• 1997

Direct3D is a recently developed 3D graphic accelerator such that we could make a Windows graphic programs with Direct3D easily. This paper presents the fractal terrain model viewer developed in terms of Direct3D. The object classes and the input dialog box used the model viewer, program initializing process, and the flow of the model viewer are discussed. Finally, the output of terrain formulation in wire-frame, solid, and point type form are presented. To show the results, the data of a terrain model were made by a fractal technique, the midpoint displacement methods with square lattices of points.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.8
• /
• pp.1199-1203
• /
• 2012

H.264 adopted many compression tools to increase image data compression efficiency such as B frame bi-directional predictions, the direct mode coding and so on. Despite its high compression efficiency, H.264 can suffer from its long coding time due to the complicated tools of H.264. To realize a high performance H.264, several fast algorithms were proposed. One of them is adaptive fast direct mode decision algorithm using mode and Lagrangian cost prediction for B frame in H.264/AVC (MLP) algorithm which can determine the direct coding mode for macroblocks without a complex mode decision process. However, in this algorithm, macroblocks not satisfying the conditions of the MLP algorithm are required to process the complex mode decision calculation, yet suffering a long coding time. To overcome the problem, this paper proposes a fast direct mode prediction algorithm. Simulation results show that the proposed algorithm can determine the direct mode coding without a complex mode decision process for 42% more macroblocks and, this algorithm can reduce coding time by up to 23%, compared with Jin's algorithm. This enables to encode B frames fast with a less quality degradation.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.2
• /
• pp.29-40
• /
• 2021

Purpose: In this study, with the transaction amount of foreign direct Purchase and foreign direct sales increasing, South Korea is in a situation where foreign direct sales are focused on China. We looked at the impact of consumer innovation and site characteristics on repurchase ability among the characteristics of overseas direct purchase consumers as a way to make direct overseas sales to various overseas countries. Research design, data and methodology: Consumer innovativeness consists of four variables: functional, hedonistic, social, and cognitive, and the site characteristics consisted of four variables: product price, product assortment, convenience, and service. The study was conducted on consumers with foreign direct purchase experience, and was finally used in 252 additional analyses. Results: The main findings of this study were first, that the impact on the degree of re-purchase among consumer innovativeness of foreign direct purchase consumers had a significant impact in the order of cognitive innovativeness, hedonistic innovativeness, and functional innovativeness. Social innovativeness did not affect the degree of re-purchase. Second, site characteristics have been found to have a significant impact on the degree of re-purchase in order of product assortment, commodity price, and service. Convenience did not affect the degree of re-purchase. Conclusions Taken together these results can be called the biggest characteristic of the cognitive innovativeness of the consumer's inclination to use the overseas direct purchase, the price or quick response of the goods sold on the site is a factor that affects the re-purchase, above all it is important to have a variety of products. We will present this element as a way to make direct sales abroad to various countries. In addition, foreign direct purchase is a lot of transactions in China, the United States, EU, but the share of China is high in foreign direct sales, and the U.S. and EU have a very low performance, it is important to consider the reasons why they prefer Korean products in China to study the social and cultural characteristics of U.S. and European consumers in the future, and to support and active marketing that companies and sellers can increase sales.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.330-341
• /
• 1999

An experimental study for the two types of burners used in the non-oxidizing direct fired furnaces of the heat treatment process for the cold rolled plate has been carried out to investigate the combustion characteristics and the oxidization of the surface of steel plate. A steep temperature gradient and entrainment of residual oxygen were found near the heating surface in the flame of the nozzle mixing burner which has strong swirl velocity component. It was concluded that the elimination of the residual oxygen and the increase of the temperature of combustion gas on the heating surface are needed to enhance the performance of the burners for application to the non-oxidizing direct fired furnaces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2245-2252
• /
• 2002

Design sensitivity analysis scheme is proposed in an elasto -plastic finite element method with explicit time integration using a direct differentiation method. The direct differentiation is concerned with large deformation, the elasto-plastic constitutive relation, shell elements with reduced integration and the contact scheme. The design sensitivities with respect to the process parameter are calculated with the direct analytical differentiation of the governing equation. The sensitivity results obtained from the present theory are compared with that obtained by the finite difference method in a class of sheet metal forming problems such as hemi-spherical stretching and cylindrical cup deep-drawing. The result shows good agreement with the finite difference method and demonstrates that the preposed sensitivity calculation scheme is a pplicable in the complicated sheet metal forming analysis and design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1751-1756
• /
• 2007

This paper presents a high performance pressure control scheme for SR(Switched Reluctance) type hydraulic oil pump using DITC(Direct Instantaneous Torque Control). SR drive has a good feature for pump applications due to a high efficiency, high speed and high torque characteristics. But, SR drive has high torque ripple in commutation region. So, the pump pressure variation is high in the region. In order to reduce the pressure variation, DITC combined with pressure control scheme is presented in this paper. A simple PI controller with flow and pressure limit, generates a reference torque to keep the constant actual pump pressure. The direct torque controller of SR drive generates inverter switching signals according to a control rule and a torque estimator. Computer simulation and experiemtal results show the validation of the proposed control scheme.