• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.125-134
• /
• 2006

The tightness of windows have devoted to the improvement of thermal insulation and energy saving in buildings. But it is known that this tightness causes some side effects such as low ventilation, low capacity to humidity and temperature control and these are not profitable for inhabitants. To act on these side effects, Korean traditional windows which are composed of Han-Ji(Koreand traditional paper) and Chang-Sal(Korean traditional wooden frame) have been studied to get a reasonable solutions for these problems. In this study, to compare the thermal and humidity control performance of current window(12 mm pair) and Korean traditional windows, frames which are made of existing window and Korean traditional windows are adapted to scale model house and then humidity and temperature of in and out of scale model house are measured and analysed. The results of this study are followings ; 1) When Korean traditional window charges 20cm(1/8 of total window area) from total window area, Han-Ji window has higher thermal insulation than that of existing window in daytime. There is the most big thermal difference when double faced with double-ply Han-Ji window is placed to mock-up house. In night-time, the temperature difference is very small so this means that Korean traditional window is good to cover direct sunlight in daytime and reduce the temperature of balcony. One faced with one-ply han-Ji window has the best humidity penetration performance among three type of Korean traditional windows. 2) When Korean window area enlarged to 40cm(1/4 of total window area), the function of 40cm width Han-Ji window is higher than that of 20cm's. This means that enlargement of Han-Ji window cover direct sunlight more and is more efficient in humidity penetration.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.36-44
• /
• 2009

본 연구의 목적은 한국의 궁궐건축 빛환경 성능을 측정하고 분석하고자 하며, 현재까지 가장 보존이 잘되어 있는 창덕궁 낙선재를 선택하였다. 조도 분포와 휘도 분포를 측정한 결과, 처마에 의해 직사일광의 유입이 차단되는 것을 알 수 있었으며, 밝은 색의 마당 등에 의한 반사광이 실내 깊숙이 유입되는 것을 알 수 있었다. 그리고 창호의 겹 수가 증가함에 따라 실내의 주광 분포는 균일하고 변화가 적음을 알 수 있었다. 또한 창호의 표면의 휘도분포는 윗부분 보다 아랫부분의 휘도가 높게 나타났으며, 이는 처마에 의해 직사일광이 차단되기 때문이다. 본 연구는 궁궐건축의 빛 환경 특성과 현대건축에서의 활용에 대한 기초자료로 활용이 가능하다.

• 한국광학회지
• /
• 제31권6호
• /
• pp.259-267
• /
• 2020

실외에서 운용되는 무선 광통신 시스템의 수신기는 태양광에 직·간접적으로 노출되기 마련이다. 본 논문에서는 주광이 무선 광통신 시스템의 수신 감도에 미치는 영향을 정량적으로 분석하였다. 이를 위하여 방사 조도 측정치를 활용하여 지상에 위치한 수신기에 특정 시야각으로 직접 또는 간접적으로 입사하는 단위 면적당 태양광 전력 스펙트럼 밀도를 얻었고, 이 값을 이용하여 세기 변조/직접 검출 및 코히어런트 시스템의 성능 열화를 계산하였다. 분석 결과 주광이 수신기에 간접적으로 인가되는 경우 수신 감도 페널티가 시스템 종류에 관계없이 1.3 dB 이하였으나, 직접적으로 인가되는 경우에는 30 dB 이상의 매우 큰 수신 감도 열화가 발생하였다. 또한 이러한 수신 감도 열화는 편광자 사용 또는 광학 필터 대역폭 조절에 의해서도 거의 경감되지 않았다.

• 한국실내디자인학회논문집
• /
• 제27권3호
• /
• pp.90-99
• /
• 2018

The purpose of this study is to study how F.L. Wright reflected the climatic properties and materials of the region into creative ways of designing his architecture. The research method examined the design methods and use of materials by Wright in existing research literature and compares the space plans of housing works in Arizona. The research results will be summarized as follows : 1) For two-story houses, pilotis was used to avoid the hot air and the walls on the ground floor were often planned as thick wall. 2) In the fifties, F.L. Wright's design method changed in a circle from the vertical and horizontal lines. 3) F.L.Wright's Architectural form concepts and design concepts were extracted from local symbolic forms and natural forms. 4) F.L.Wright avoided Arizona's direct light but Indirect sunlight enters into the interior space. 5)External space was expressed as a closed space, while internal space was expressed as an open space. It's like an organic space. 6) Most of the housing materials used are stone and cement from rough deserts, and wood with low heat conductivity and thick concrete blocks to prevent the sunlight from rising above.

• 한국실내디자인학회논문집
• /
• 제19권5호
• /
• pp.3-10
• /
• 2010

In the history of art and architecture, there are different characteristics in relationship between light and space. Among them, two characteristics seem to be fundamental : The first is that contrast between light and darkness is more articulated. Direct sunlight penetrates into the dark interior space made by heavy masonry structure. This is generally found in the traditional western religious buildings. The second is that light is mixed with darkness and becomes shade. Shade is different from shadow that is usually perceived as the opposite of light. Sunlight is filtered under through the big horizontal roof and rice paper walls in the traditional far-east Asian architecture and becomes weak ambient light. In this shade, there is no strong contrast between light and darkness. This difference is not only originated from the architectural differences, but also originated from the conceptual differences about light, space, and the world in two cultures. This paper tries to study the philosophical, aesthetical backgrounds as well as case examples in art and architecture of two characteristics. Based on the case studies, this paper aims to analyze the main perceptual structure. Finding the relationship between light, space, and human body by making three dimensional models is the crucial analysis method of this research. Although in real life and experiencing the world, these two characteristics are not clearly separated, comparative study based on different cultures gives opportunity to think of diverse perspectives on light and space.

• Structural Monitoring and Maintenance
• /
• 제3권3호
• /
• pp.277-296
• /
• 2016

There is a need for rapid and objective assessment of concrete bridge decks for maintenance decision making. Infrared Thermography (IRT) has great potential to identify deck delaminations more objectively than routine visual inspections or chain drag tests. In addition, it is possible to collect reliable data rapidly with appropriate IRT cameras attached to vehicles and the data are analyzed effectively. This research compares three infrared cameras with different specifications at different times and speeds for data collection, and explores several factors affecting the utilization of IRT in regards to subsurface damage detection in concrete structures, specifically when the IRT is utilized for high-speed bridge deck inspection at normal driving speeds. These results show that IRT can detect up to 2.54 cm delamination from the concrete surface at any time period. It is observed that nighttime would be the most suitable time frame with less false detections and interferences from the sunlight and less adverse effect due to direct sunlight, making more "noise" for the IRT results. This study also revealed two important factors of camera specifications for high-speed inspection by IRT as shorter integration time and higher pixel resolution.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1310-1317
• /
• 2014

In our daily life, the need of energy increases day by day. However, the amount of natural resources on the earth is limited and thus gaining renewable energy as an energy resource is one of the important and urgent problems. Solar energy is one of the most popular available energy sources that can be converted into electricity by using solar panels. In order for solar panels to produce maximal output power, the incident angle of the sunlight needs to be persistently perpendicular to the solar panel. By the way, most of the solar panels are installed at fixed position and direction. Therefore, as the sun's position changes, it is impossible to produce maximal output power inevitably. To improve this problem, in this paper, a sun tracking system using two degree-of-freedom (DOF) active sensor array is proposed so that the solar panel may always direct sunlight perpendicularly. And also a series of software, such as a search mode and a holding mode, which can control the developed sun tracking system is developed. Several experiments using the implemented sun tracking system are executed and the effectiveness of the system is verified from the experimental results.

• Architectural research
• /
• 제22권4호
• /
• pp.113-122
• /
• 2020

Hospital architecture must be planned as a therapeutic space. Numerous studies have proven that exposure to nature has a healing effect. However, research on the architecture itself about this issue is still insufficient. This study analyzed Le Corbusier's Venice hospital project and its architectural configurations with nature. Le Corbusier had been interested in blurring the interior/exterior line to draw nature inside. In his projects, nature was conceived in an abstract sense as "something green." However, in the hospital project, natural elements including vegetation, the lagoon, and light, and the landscape scenery they created, were considered in the harmony of the architectural space. The architectural spaces with courtyards, pilotis, and roof gardens provided views and direct access to nature, and in the interior spaces, the connections to these external spaces and the permeation of views of nature and sunlight were incorporated. Many spaces provided the possibility to actually encounter nature, with a variety of indoor/outdoor space configurations rather than a merely passive placing of some natural elements. This project is considered to be an important reference for contemporary hospital architecture, since the architectural space and nature connected through various spatial configurations also in healthcare programs. As Le Corbusier emphasized, sunlight, vegetation, and also architectural space should be an essential factor in therapeutic hospital architecture planning.

• KIEAE Journal
• /
• 제14권5호
• /
• pp.67-73
• /
• 2014

This study aims at examining kinetic efficient shading systems and their implementation methods. These days, the importance of the shading devices are getting more significant due to the energy problem. Cordially, suitable shade designs are required as an important element for the exterior envelope of the building. This study employs the optimal shading design as an efficient shading method with the kinetic system that can be converted actively by the altitude of the sun. The proposed kinetic shading system works not only as a lightshelf in case the altitude of the sun is high but also as a vertical louver when the sun is getting lower in order to block the direct sunlight. This study has analyzed the thermal performance and shading coefficient of the kinetic shading system in comparison to existing fixed shading devices using the Ecotect. The results, in sum, conclude that the suggested kinetic shading system could decrease direct sunlights 26.2% more than the existing shading methods.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.297-307
• /
• 2017

폐MDF 재생섬유를 인테리어 소품 제조용 원료로 이용하기 위해 MDF 제조용 리기다소나무 버진섬유와 MDF를 제조한 후 재해섬한 재생섬유에 대해 빨강, 노랑 및 파랑색 계열의 Bis-monochlorotriazine (MCT)계와 Vinyl sulfone(VS)계의 반응성염료, Anthraquinone계의 배트염료, Diazo계열의 직접염료 및 치자와 소목의 천연염료에 의한 염색 특성 및 일광견뢰도를 검토하였다. 염색 전의 버진섬유와 재생섬유의 색상은 각각 4.2YR과 4.4YR로 약간의 적색기가 있는 황색을 나타내고 있었으며, 재생섬유가 버진섬유에 비해 $L^*$의 값이 작아 약간 더 어두웠다. 적, 청, 황색계의 MCT계와 VS계의 반응성염료, 배트 염료, 직접염료 모두 버진섬유와 재생섬유에 관계없이 염색은 매우 양호하게 잘 이루어졌다. 재생섬유가 버진섬유보다 염착량은 약간 높았고, $L^*$와 V의 값은 약간 감소하였으나, 큰 차이는 없었다. 일광견뢰도는 염료에 따라 약간의 차이는 있으나 버진염색섬유가 재생염색섬유보다 더 큰 색차를 보이고 있어 불량하였다. 소목으로 염색한 재생섬유와 버진섬유의 색상은 각각 4.4YR과 4.0YR로 염색 전의 미염색 섬유와 거의 차이가 없었으나, 치자로 염색한 섬유의 색상은 각각 7.4YR과 6.9YR로 황색계의 반응성염료, 배트염료 및 직접염료보다 큰 색차를 보여 염색성은 우수하였으나 일광견뢰도는 불량하였다.