• 한국인쇄학회지
• /
• 제6권1호
• /
• pp.13-39
• /
• 1988

Test colors are halftone dot printed at the rate of 10% halftone dot area by process inksblack, cyan, magenta and yellow ink. Reproduced colors are measured by the weighted-ordinate colorimetric method and the direct colorimetric method. The weighted-ordinate colorimetric method compare favorably with the direct colorimetric method, because the former has good regular changes of tristimuIus values, chromacity coordinates, excitation purities, value functions and has smaller errors of dominant and complementary wavelengths than the latter. All test colors classify with the Munsell renotation.tation.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.19-29
• /
• 2022

The 2D/1D method has become the mainstream of the direct transport calculation considering the balance of accuracy and efficiency. However, the 2D/1D method still suffers from stability issues. Recently, a quasi-3D method has been proposed with axial Legendre expansion. Analysis and comparison of the 2D/1D and quasi-3D method is conducted in theory from the equation derivation. Besides, the C5G7 benchmark, the KUCA benchmark and the macro BEAVRS benchmark are calculated to verify the theory comparisons of these two methods with the direct transport code SHARK. All results show that the quasi-3D method has better stability and accuracy than the 2D/1D method with worse efficiency and memory cost. It provides a new option for direct transport calculation with the quasi-3D method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.1-8
• /
• 1995

A method for the inelastic response analysis of Planar frame based on Direct Method is presented. Two elements ( inelastic truss and inelastic beam ) are developed. The accuracy and reliability of the preposed method is verified by comparing the results of example analysis with BRAIN-2D developed by Powell.

• 드라이브 ㆍ 컨트롤
• /
• 제10권4호
• /
• pp.34-40
• /
• 2013

The transmission control method of small forklift is classified into pilot control method and direct control method. In pilot control method, the hydraulic circuit which consists a lot of components is very complex so the production process is too costly and time consuming. The direct control method contains fewer components that can be configured to simple hydraulic circuit. It has more advantages because the shift sensitivity of transmission is changed easily via the input profile. In this paper, the controller design and the input profile for system are studied to apply to the direct control method. The input profile consists of Fill section, Hold section and Ramp section. The characteristic of each section is obtained through experiment. As the result, the shift sensitivity and starting performance are effected by Fill section and Hold section.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.809-814
• /
• 2006

In this paper, the modified direct method employing beam transformation technique is proposed in order to efficiently calculate hydroelastic responses of floating structure. Since the proposed method expresses the displacements of three-dimensional structure with those of transformed beam which leads to small number of equations of motion, the method is numerically efficient compared to the conventional direct method. To verify the efficiency of the proposed method a 500 m-long floating structure under wave loads is considered in numerical example. Displacements, bending moments, torsion moments and shear forces are calculated and computing tine is examined. The results are also compared with those of the conventional direct method.

• Parasites, Hosts and Diseases
• /
• 제43권3호
• /
• pp.115-117
• /
• 2005

The Kato-Katz (KK) method is a well-known method of fecal examination for helminthiases. Its diagnostic sensitivity was found very high for clonorchiasis. The present study evaluated the correlation of Clonorchis sinensis egg counts by the KK method with those by direct smear and formalin-ether (FE) technique. The egg counts obtained by the KK method (Y) were correlated with the counts by direct smear (X) with the equation of Y = 659.4 + 0.266X ($r^2$ = 0.738), but not with those by the FE method. The present study demonstrated that the KK method and direct smear were useful for both qualitative and quantitative diagnosis of clonorchiasis, especially in the field.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.17-23
• /
• 2007

In this paper, the modified direct method employing beam transformation technique is proposed in order to efficiently calculate hydroelastic responses of floating structure. Since the proposed method expresses the displacements of three-dimensional structure with those of transformed beam which leads to small number of equations of motion, the method is numerically efficient compared to the conventional direct method. To verify the efficiency of the proposed method, a 500 m-long floating structure under wave loads is considered in numerical example. Displacements, bending moments, torsion moments and shear forces are calculated and computing time is examined. The results are also compared with those of the conventional direct method.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.79-86
• /
• 2008

High performance direct-iterative hybrid linear solver for large scale finite element problem is developed. Direct solution method is robust but difficult to parallelize, whereas iterative solution method is opposite for direct method. Therefore, combining two solution methods is desired to get both high performance parallel efficiency and numerical robustness for large scale structural analysis problems. Hybrid method mentioned in this paper is based on FETI-DP (Finite Element Tearing and Interconnecting-Dual Primal method) which has good parallel scalability and efficiency. It is suitable for fourth and second order finite element elliptic problems including structural analysis problems. We are using the hybrid concept of theses two solution method categories, combining the multifrontal solver into FETI-DP based iterative solver. Hybrid solver is implemented for our general structural analysis code, IPSAP.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.866-870
• /
• 2001

Measurement techniques for in-duct acoustic source parameters can be classified into the direct method and the load method, according to whether it utilizes an extra external source or not. It is reported that the load methods yield the negative source resistance and the purpose of this paper is to clarify that the time-varying nature of the source is the main cause of this physically implausible result. For this purpose, the direct and load methods for measuring the source characteristics of a simplified fluid machine are simulated using the time domain numerical analysis. In the numerical simulations, the method of characteristics is employed and the source characteristics are calculated from the resultant data. It is shown that the load method results in negative source resistance for some frequencies, whereas the direct method yields positive values for all frequencies considered. It is found that the result of load method is quite sensitive to the change of cylinder pressure or valve profile in contrast to the direct method.

• Journal of Microbiology and Biotechnology
• /
• 제19권7호
• /
• pp.647-650
• /
• 2009

Using 200 porcine colon tissues, the efficiencies of three isolation methods of Campylobacter from porcine intestines were compared: Method 1, direct streaking of colon mucosa; Method 2, direct inoculation of intestinal contents with a swab; Method 3, inoculation of pre-enriched medium. A total of 460 Campylobacter isolates were obtained from 178 samples (89%) by direct streaking of colon mucosa, 142 samples (71%) by direct streaking of a swab, and 94 samples (47%) by pre-enrichment of intestinal contents in Preston broth. Direct streaking of colon mucosa was superior to the other two isolation methods, in terms of rapidity and higher efficiency. When isolates were identified with various biochemical tests and PCRs specific to 16s rRNA, mapA, and ceuE, C. coli was the predominant species (87%) in porcine, whereas the rest of the isolates were identified as C. lanienae.