• 한국방재안전학회논문집
• /
• 제13권4호
• /
• pp.65-74
• /
• 2020

지속가능한 하천수 관리를 위해서는 연속적이고 정확한 하천수 사용량 계측자료가 필요하다. 하천수 사용지점별로 적용가능한 계측 방법이 상이하나, 일정규모 이상의 주요 개수로 지점에서는 보다 정밀한 직접 계측방법이 요구된다. 하천수 사용자는 사용량 계측을 위해 적정한 직접 계측방법을 선정해야 하는데, 이에 대한 표준 및 검증 연구가 부족한 실정이다. 본 연구에서는 만경강 상류의 시험유역에 직접 계측방법인 수위-유량관계법, 초음파법, 전자파법을 적용하였고, 계측방법별로 산정된 유량자료간의 절대오차 비교를 통해 계측자료의 정확도를 비교 평가하였다. 점단위 산정유량 비교시 초음파법이 실측값에 가장 근사한 결과를 보였다. 연속적인 계측을 통해 일단위와 월단위의 총량을 비교하였고, 초음파법과 전자파법이 정확도가 높은 것으로 나타났다. 본 연구의 결과를 토대로 초음파법과 전자파법이 수위-유량관계법에 비해 비교적 높은 비용이 투입되는 것을 감안하여 하천수 사용시설의 중요도에 따라 적정한 직접 계측방법을 선정할 수 있기를 기대한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2143-2145
• /
• 2003

In the linear system identification using the discrete time constant coefficients, there is a subspace method based on 4SID recently much suggested instead of the parametric method like as the maximum likelihood method. The subspace method is not related with the impulse response and difference equation in its input-output equation, but with the system matrix of the direct state space model from the input-output data. The subspace method is a very useful tool to adopt in the multivariable system identification, but it has a shortage unable to adopt in the closed-loop system identification. In this paper, we are suggested the methods to get rid of the shortage of the subspace method in the closed-loop system identification. The subspace method is used in the estimate of the output prediction values from the estimating of the state space vector. And we have compared the results with the outputs of the recursive least square method in the numerical simulation.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.554-559
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1228-1235
• /
• 2014

UHF RFID 태그를 설계하기 위해서는 태그 칩의 입력 임피던스 값이 필요하다. 입력 임피던스 산출에는 직접측정 방법이 보편적으로 사용되고 있다. 본 연구에서는 이 방법을 사용할 경우, 칩을 측정장치에 연결하기 위해 도입되는 픽스쳐에서 발생되는 문제점을 분석하고, 그 결과를 확인하였다. 이 문제를 근본적으로 피해갈 수 있는 대안으로 모델링 방법을 제안하고, 실험을 통해 타당성과 정확도를 확인하였다.

• 한국정보전자통신기술학회논문지
• /
• 제4권4호
• /
• pp.264-271
• /
• 2011

항공기의 계기착륙을 유도하는 시스템인 ILS(Instrument Landing System)는 1947년 ICAO(International Civil Aviation Organization)에서 국제표준으로 채택되어 현재는 상용시스템으로 출시되고 있다. 본 논문에서는 통합형 ILS 디지털 송수신 모듈의 설계방법을 제안하였다. 새롭게 제안한 것은 FPGA를 이용한 디지털 이중 AM 변복조기, 샘플링 클럭 생성을 위한 DDS(Direct Digital Synthesizer), DDC(Digital Down converter) 구조의 복조기, DSP 칩을 이용한 AM 스펙트럼 분석기의 디지털 설계 기법이다. 제안한 설계 방법의 유용성을 모듈 개발 및 실험을 통해 확인한 결과, 성능이 우수한 상용 시스템으로의 활용이 가능함을 확인하였다.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.193-197
• /
• 1999

By the report of KISCO, the 54.20% of total disaster and the 20.87% of death disaster was caused by unsafe position-control. However, it is possible to decrease this kind of disaster rate by designing the control device in the consideration of safety. One of the most popular control device is vehicle instrument panel. Therefore, not only basic function but safe control under the driving environments should be considered when the vehicle instrument panel is designed. For safe control at the driving time, it is especially important to determine the priority of each part using emergency degree and usage frequency, and to set them with this priority for easy control position. In this paper, developing method to determine the priority of each part by pair-wise comparison for emergency degree and usage frequency was suggested and generated the mutual order weights to give them orders. To apply this method to the parts of instrument panel such as function button, audio, air conditioner, and other several detail parts, the direct questionnaire was implemented to drivers about the emergency degree and usage frequency of each part.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.117-120
• /
• 2005

The business market of architecture has got a system that controls a deposit according to the price function. This system is written on a law of contract about countries. So the main body of construction has to make a reasonable contract. This study is written about a rate of numerical index on controling a deposit. We tried to fine problems and solutions of labor expenses, instrument costs and material costs which is so big and changable on the construction market Labor expenses are expressed according to the rate of construction scale between direct and indirect cost that applies ability of works. Instrument costs are expressed according to an output method of a unit price annually and a weight allowance of local instrument conditions and use frequence. The last material costs expressed according to a local weight allowance make a decision of the material cost index. They applies locally relative index more than absolute one on what uses the price rate of producers and importations. This solutions are not enough to apply to the real market, so it needs to exam and to be on the market after a feasibility study.

• The Journal of the Acoustical Society of Korea
• /
• 제16권2E호
• /
• pp.3-13
• /
• 1997

The Jing is a traditional Korean percussion instrument which plays a major role in Korean folk music. The distingishing feature of this instrument is its unique, long lasting low tone timbre. In this paper, we investigated the vibro-acoustic characteristics of the Jing. Our attention was focused mainly on findings out the physical variables that determine its unique sound. By understanding the way in which the Jing is manufactured, we were able to realize that the unique manufacturing and especially the tuning process by expert craftsman is responsible for the peculiar timbre the Jing produces. The experimental methods implemented to analyzer the Jing were planar acoustic holography and direct measurements by accelerometers. The results from the holographic method and the direct measurements were in good agreement. It turned out that unlike most percussion instruments which have inharmonic partials, the Jing has harmonic partials which are responsible for its unique low-tone timbre. From the holographic representations of the modes, it is clear that the antinodes are located in the center of the Jing which is coincident with the typical striking location. In addition, intensity maps were constructed so that the specific acoustic energy flow can be visualized. It was also interesting to see the the circulation of energy intensity which corresponds to the rotating mode of the Jing.

• Restorative Dentistry and Endodontics
• /
• 제41권3호
• /
• pp.159-166
• /
• 2016

The purpose of this review was to suggest practical criteria for the clinical translucency evaluation of direct esthetic restorative materials, and to review the translucency with these criteria. For the evaluation of reported translucency values, measuring instrument and method, specimen thickness, background color, and illumination should be scrutinized. Translucency parameter (TP) of 15 to 19 could be regarded as the translucency of 1 mm thick human enamel. Visual perceptibility threshold for translucency difference in contrast ratio (${\Delta}CR$) of 0.07 could be transformed into ${\Delta}TP$ value of 2. Translucency differences between direct and indirect resin composites were perceivable (${\Delta}TP>2$). Universal and corresponding flowable resin composites did not show perceivable translucency differences in most products. Translucency differed significantly by the product within each shade group, and by the shade group within each product. Translucency of human enamel and perceptibility threshold for translucency difference may be used as criteria for the clinical evaluation of translucency of esthetic restorative materials.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.521-524
• /
• 2005

In order to measure ECG in daily life, a new ECG measurement method on bed was developed. The provided method does not require any direct conductive contact between the instrument and bare skin, so that it does not cause the uncomfortable feel of touch and the possible skin trouble which are typical shortcomings of the conventional conductive contact ECG measurement. The provided method utilized an array of high-input-impedance active electrodes fixed on the mattress and an indirect-skin-contact ground made of a large conductive textile sheet and laid on lower area of the mattress. A thin cotton bedcover covered the mattress, the electrodes, and the conductive textile and subjects lay on the mattress over the bedcover. ECG was obtained successfully. However its signal quality is lower and the motion artifact is larger than direct-contact measurement. Careful measurement setup was needed to reduce the motion artifact originated from variation in static electricity. From the ECG obtained by the provided method, R-peak could be discriminated easily and the information about the position and the posture of the subject could be obtained.