• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.51-57
• /
• 2014

PURPOSES : An conventional method for electric power generation is converting thermal energy into mechanical energy then to electrical energy. Due to environmental issues such as global warming related with $CO_2$ emission etc., were the limiting factor for the energy resources which resulting in extensive research and novel technologies are required to generate electric power. Thermal energy harvesting using thermoelectric generator is one of energy harvesting technologies due to diverse advantages for new green technology. This paper presents a possibility of application of the thermoelectric generator's application in the direct exchange of waste solar energy into electrical power in road space. METHODS : To measure generated electric power of the thermoelectric generator, data logger was adopted as function of experimental factors such as using cooling sink, connection methods etc. Also, the thermoelectric generator、s behavior at low ambient temperature was investigated as measurement of output voltage vs. elapsed times. RESULTS : A few temperature difference between top an bottom of the thermoelectric generator is generated electric voltage. Components of an electrical circuit can be connected in various ways. The two simplest of these are called series and parallel and occur so open. Series shows slightly better performance in this study. An installation of cooling sink in the thermoelectric generator system was enhanced the output of power voltage. CONCLUSIONS : In this paper, a basic concepts of thermoelectric power generation is presented and applications of the thermoelectric generator to waste solar energy in road is estimated for green energy harvesting technology. The possibility of usage of thermoelectric technology for road facilities was found under the ambient thermal gradient between two surfaces of the thermoelectric module. An experiment results provide a testimony of the feasibility of the proposed environmental energy harvesting technology on the road facilities.

• Archives of Reconstructive Microsurgery
• /
• 제5권1호
• /
• pp.106-111
• /
• 1996

Purpose : Propose a surgical technique in donor harvesting method in free vascularized proximal fibular epiphysis. Methodology : Concerned about growth potentials of the transplanted epiphysis in our long term results of the epiphyseal transplanted 13 cases more than 4 years follow-up, anterior tibial artery which contains anterior tibial recurrent artery is most reliable vessel to proximal fibular epiphysis which is the best donor of the free vascularized epiphyseal transplantation. In vascular anatomical aspect proximal fibular epiphysis norished by latearl inferior genicular artery from popliteal, posterior tibial recurrent artery and anterior tibial recurrent artery from anterior tibial artery and peroneal artery through metaphysis. The lateral inferior genicular artery is very small and difficult to isolate, peroneal artery from metaphysis through epiphyseal plate can not give enough blood supply to epiphysis itself. The anterior tibial artery which include anterior tibial recurrent and posterior tibial recurrent artery is the best choice in this procedure. But anterior tibial recurrent artery merge from within one inch from bifucating point of the anterior and posterior tibial arteries from popliteal artery. So it is very difficult to get enough vascular pedicle length to anastomose in recipient vessel without vein graft even harvested from bifucating point from popliteal artery. Authors took recipient artery from distal direction of anterior tibial artery after ligation of the proximal popliteal side vessel, which can get unlimited pedicle length and safer dissection of the harvesting proximal fibular epiphysis. Results : This harvesting procedure can performed supine position, direct anterolateral approach to proximal tibiofibular joint. Dissect and isolate the biceps muscle insertion from fibular head, micro-dissection is needed to identify the anterior tibial recurrent arteries to proximal epiphysis, soft tissue release down to distal and deeper plane to find main anterior tibial artery which overlying on interosseous membrane. Special care is needed to protect peroneal nerve damage which across the surgical field. Conclusions : Proximal fibular epiphyseal transplantation with distally directed anterior tibial artery harvesting technique is effective and easier dissect and versatile application with much longer arterial pedicle.

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.253-260
• /
• 2015

Enlargement of street tree planting area is the proper and effective solution to reduce carbon dioxide. This solution bases on the ability of carbon storage and uptake by tree metabolism. However, the circumstance of road side has fatal disadvantages in tree metabolism such as growth and maturity because cutting and filling of roadsides cause unnatural soil composition. In this point, early rootage of street tree is the main factor of reducing carbon dioxide. This study aimed to find a appropriate transplantation planting method for sound and rapid rootage of street tree. For the study, Korean Mountain Ash(Sorbus alnifolia) were used for experimental groups. The groups were categorized by three groups such as trees produced on container with mulching treatment, trees produced in outdoor with mulching treatment, trees produced on container with weeding treatment. Each group consisted 10 trees with same size and transplanted in experimental site. Five months after transplanting, each group was estimated the biomass and carbon storage through a direct harvesting method. According to results of the study, the carbon storage of trees produced on container with mulching treatment is 42% more than trees produced in outdoor with mulching treatment. And the carbon storage of trees produced on container with mulching treatment is 19.5% more than trees produced on container with weeding treatment. These results may imply that transplantation of container produced tree with mulching treatment is the most rapid rootage among other groups. The weeding treatment is more effective than mulching treatment for rapid rootage of street trees.

• Wind and Structures
• /
• 제26권5호
• /
• pp.279-292
• /
• 2018

Inspired by the energy harvesting eel, a flexible flag behind a D-shape cylinder in a uniform viscous flow was simulated by using the immersed boundary method (IBM) along with low-speed wind tunnel experimentation. The flag in the wake of the cylinder was strongly influenced by the vortices shed from the upstream cylinder under the vortex-vortex and vortex-body interactions. Geometric and flow parameters were optimized for the flexible flag subjected to passive flapping. The influence of length and bending coefficient of the flexible flag, the diameters (D) of the cylinder and the streamwise spacing between the cylinder and the flag, on the energy generation was examined. Constructive and destructive vortex interaction modes, unidirectional and bidirectional bending and the different flapping frequency were found which explained the variations in the energy of the downstream flag. Voltage output and flapping behavior of the flag were also observed experimentally to find a more direct relationship between the bending of the flag and its power generation.

• 농업과학연구
• /
• 제46권1호
• /
• pp.151-161
• /
• 2019

Ashwagandha (Withania sominifera Duanal) is an important medicinal herb with increased demand after discovering its anti-stress and sex stimulating properties that are attributed to the presence of biologically active alkaloid compounds. The aim of this study was to elucidate a proper agro technological package that ensures the optimum growth of Ashwagandha to obtain the finest quality without degrading the pharmacologically active constituents. Mixtures of organic and inorganic fertilizers were combined with direct seeding and transplanted as four different treatments in this study. The fresh and dry weights of the tubers were recorded up to 12 months starting from two months after sowing (MAS) while the shoot height, root length, number of leaves, fresh and dry weights of the shoot and the root with a shoot ratio of up to 6 MAS were determined. The results revealed that the growth of Ashwagandha was not affected significantly by the method of planting, type of fertilizer or their combinations during most of the harvests. However, tubers harvested at 6 MAS had the highest recorded dry tuber weight per plant in all four treatments compared to the early harvests where two direct seeded treatments had the best results. Comparison of the phytochemical compounds showed that direct seeding with organic fertilizer had the highest recorded values for alkaloid and withaferine A contents with a lower percentage of fiber compared to the treatments with inorganic fertilizer. In conclusion, direct seeding with organic fertilizer and tubers harvested at 6 MAS are recommended as the best cultivation conditions and harvesting stage to obtain high quality tubers of Ashwagandha, respectively.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.508-514
• /
• 2022

Piezoelectric composite films which are enabled by inorganic piezoelectric nanomaterials-embedded polymer, have attracted enormous attention as a sustainable power source for low powered electronics, because of their ease of fabrication and flexible nature. However, the absorption of applied stress by the soft polymeric matrices is a major issue that must be solved to expand the fields of piezoelectric composite applications. Herein, a flexible and porous piezoelectric composite (piezoelectric sponge) comprised of BaTiO₃ nanoparticles and polydimethylsiloxane was developed using template method to enhance the energy conversion efficiency by minimizing the stress that vanishes into the polymer matrix. In the porous structure, effective stress transfer can occur between the piezoelectric active materials in compression mode due to direct contact between the ceramic particles embedded in the pore-polymer interface. The piezoelectric sponge with 30 wt% of BaTiO₃ particles generated an open-circuit voltage of ~12 V and a short-circuit current of ~150 nA. A finite element method-based simulation was conducted to theoretically back up that the piezoelectric output performance was effectively improved by introducing the sponge structure. Furthermore, to demonstrate the feasibility of pressure detecting applications using the BaTiO₃ particles-embedded piezoelectric sponge, the composite was arranged in a 3 × 3 array and integrated into a single pressure sensor. The fabricated sensor array successfully detected the shape of the applied pressure. This work can provide a cost-effective, biocompatible, and structural strategy for realizing piezoelectric composite-based energy harvesters and self-powered sensors with improved energy conversion efficiency.

• 한국환경생태학회지
• /
• 제27권5호
• /
• pp.571-578
• /
• 2013

본 연구는 도시의 주요 상록 조경수종인 소나무와 잣나무를 대상으로, 직접수확법을 통해 탄소저장 및 흡수를 용이하게 추정하는 회귀모델을 제시하고 도시수목의 탄소저감 효과를 계량화하는데 필요한 기반정보를 구축하였다. 수종별로 유목에서 성목에 이르는 일정 간격의 흉고직경 크기를 고려하여 개방 생장하는 조경수목을 구입한 후, 근굴취를 포함하는 직접수확법에 의해 개체당 부위별 및 전체 생체량을 측정하고 탄소저장량을 산출하였다. 또한, 흉고 부위의 수간원판을 채취하여 직경생장을 분석하고 탄소흡수량을 산정하였다. 흉고직경을 독립변수로 생장에 따른 수종별 단목의 탄소저장 및 흡수를 계량화하는 활용 용이한 회귀모델을 유도하였다. 이들 회귀식의 $r^2$는 0.98 이상으로서 적합도가 상당히 높았다. 동일 직경의 탄소저장 및 흡수량은 유목의 경우 소나무가 잣나무보다 더 많았으나, 20cm 이상 성목의 경우 생장량 차이에 기인하여 그 반대인 경향을 보였다. 흉고직경 25cm인 소나무와 잣나무는 각각 115.6kg, 130.0kg의 탄소를 저장하고, 연간 9.4kg, 14.6kg의 탄소를 흡수하는 것으로 나타났다. 본 연구는 조경수목의 직접 벌목 및 근굴취의 난이성에 기인하여, 생체량 확장계수, 지하부/지상부 비율, 직경생장 등 산림수목의 계수를 대용하여 대상수종의 탄소저감을 계량화한 기존 연구의 한계성을 극복할 새로운 초석을 마련하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.356.1-356.1
• /
• 2014

The Isolation of few-layered transition metal dichalcogenides has mainly been performed by mechanical and chemical exfoliation with very low yields. in particular, the two-dimensional layer of molybdenum disulfide (MoS2) has recently attracted much interest due to its direct-gap property and potential application in optoelectronics and energy harvesting. However, the synthetic approach to obtain high-quality and large-area MoS2 atomic thin layers is still rare. In this account, a controlled thermal reduction-sulfurization method is used to synthesize large-MoOx thin films are first deposited on Si/SiO2 substrates, which are then sulfurized (under vacuum) at high temperatures. Samples with different thicknesses have been analyzed by Raman spectroscopy and TEM, and their photoluminescence properties have been evaluated. We demonstrated the presence of mono-, bi-, and few-layered MoS2 on as-grown samples. It is well known that the electronic structure of these materials is very sensitive to the number of layer, ranging from indirect band gap semiconductor in the bulk phase to direct band gap semiconductor in monolayers. This synthetic approach is simple, scalable, and applicable to other transition metal dichalcogenides. Meanwhile, the obtained MoS2 films are transferable to arbitrary substrates, providing great opportunities to make layered composites by stacking various atomically thin layers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.20-39
• /
• 2020

This paper considers a downlink multi-carrier cooperative non-orthogonal multiple access (NOMA) transmission, where no direct link exists between the far user and the base station (BS), and the communication between them only relies on the assist of the near user. Firstly, the BS sends a superimposed signal of the far and the near user to the near user, and then the near user adopts simultaneous wireless information and power transfer (SWIPT) to split the received superimposed signal into two portions for energy harvesting and information decoding respectively. Afterwards, the near user forwards the signal of the far user by utilizing the harvested energy. A minimum data is required to ensure the quality of service (QoS) of the far user. We jointly optimize power allocation, subcarrier allocation, time allocation, the power allocation (PA) coefficient and the power splitting (PS) ratio to maximize the number of data bits received at the near user under the energy causality constraint, the minimum data constraint and the transmission power constraint. The block-coordinate descent method and the Lagrange duality method are used to obtain a suboptimal solution of this optimization problem. In the final simulation results, the superiority of the proposed NOMA scheme is confirmed compared with the benchmark NOMA schemes and the orthogonal multiple access (OMA) scheme.

• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.487-494
• /
• 2021

Piezoelectric generators use direct piezoelectric effects that convert mechanical energy into electrical energy. Many studies were attempted to fabricate piezoelectric generators using piezoelectrics such as ZnO, PZT, PVDF. However, these various inorganic/organic piezoelectric materials are not suitable for bio-implantable devices due to problems such as brittleness, toxicity, bio-incompatibility, bio-degradation. Thus, in this paper, piezoelectric generators were prepared using a silk fibroin film which is bio-compatible by dip-coating method. The silk fibroin films are a mixed state of silk I and silk II having stable β-sheet type structures and shows the d₃₃ value of 8~10 pC/N. There was a difference in output voltages according to the thickness. The silk fibroin generators, coated 10 times and 20 times, revealed the power density of 16.07 μW/cm² and 35.31 μW/cm² using pushing tester, respectively. The silk fibroin generators are sensitive to various pressure levels, which may arise from body motions such as finger tapping, foot pressing, wrist shaking, etc. The silk fibroin piezoelectric generators with bio-compatibility shows the applicability as a low-power implantable piezoelectric generator, healthcare monitoring service, and biotherapy devices.