• Title/Summary/Keyword: Direct flow

Search Result 1,553, Processing Time 0.032 seconds

Analysis of Baseflow at Four Major Rivers using Web-based SWAT Bflow System (Web 기반 SWAT Bflow을 이용한 4대강 유역 기저유출 분석)

  • Kum, Dong-Hyuk;Moon, Jong-Pil;Ryu, Ji-Chul;Kang, Hyun-Woo;Jang, Won-Seok;Lim, Kyoung-Jae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.373-373
    • /
    • 2011
  • Korean Government has been promoting Four River Restoration Project (i.e., Han, Geum, Nakdong, and Yeongsan rivers) since the second half of 2008. This project is expected to protect against floods and droughts by water resources management. Many researchers have study water resources management, but most studies were focused on direct runoff. However, in order to efficiently protect against floods and droughts, baseflow should be studied as well as direct runoff. Because baseflow has a great effect on streamflow, it needs to be correctly analyzed. For more accurate analysis of baseflow, direct runoff and baseflow from streamflow should be separated first. In this study, 12 flow gauging stations of four major rivers were selected, and flow data from them were obtained (2004-2010) through WAMIS and Web-based SWAT Bflow system (http://www.envsys.co.kr/~swatbflow) which was used to separate direct runoff and baseflow. Baseflow values of Pass 2 in SWAT Bflow system were used. As a result of this study, baseflow contribution was ranged from 23.4% to 68.6% and accounted for about 50% of streamflow. Through this study, it shows that in the case of the flow fluctuation, baseflow is more affected than direct runoff by changes in streamflow in a flood or dry season. Thus, baseflow estimation should not be overlooked for efficient water resources management. However, it has a limitation in this study that because this study used to select randomly 12 flow gauging stations, it did not show a common tendency on each watershed. It is important that flow gauging stations reflected on topographic characteristics of each watershed should be selected in a rigorous manner for further reliable and accurate baseflow estimation on four major rivers.

  • PDF

Simulation of generable muddy water quantity and pollutant loads in sloping field using artificial rainfall simulator (실내인공강우기를 이용한 경사지 밭의 토양유실량과 오염부하 모의)

  • Shin, Min-Hwan;Choi, Yong-Hun;Seo, Ji-Yeon;Lee, Jae-Woon;Choi, Joong-Dae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.986-990
    • /
    • 2009
  • Using artificial rainfall simulator, the soil loss, which is deemed as most cause of muddy water problem among Non-point source(NPS) pollutant, was studied by the analysis of direct runoff flow, groundwater runoff, and groundwater storage properties concerned with rainfall intensity, slope of area, and land cover. The direct runoff showed increasing tendency in both straw covered and bared boxes which are 5%, 10%, and 20% sloped respectively. Also the direct runoff volume from straw covered surface boxes were much lower than bared surface boxes. It's deemed as that the infiltration capacity of straw covered surface boxes were increased, because the surface sealing by fine material of soil surface didn't occurred due to the straw covering. Under the same rainfall intensity and slope condition, 2.4 ${\sim}$ 8.2 times of sediment yield were occurred from bared surface boxes more than straw covered surface boxes. The volume of infiltrated were increased due to straw cover, the direct runoff flow were decreased with decreasing of tractive force in surface. To understand of relationship the rate of direct runoff flow, groundwater runoff, and groundwater storage by the rainfall intensity, slope, and land cover, the statistical test was performed. It shows good relationship between most of factors, expect between the rate of groundwater storage and rainfall intensity.

  • PDF

Analysis of Regional Centrality by Investigating Direct and Indirect Flows of Commuters (통근통행에 의한 직·간접 흐름을 이용한 지역의 중심성 분석)

  • Lee, Jong-Sang;Seo, Ducksu
    • Journal of Agricultural Extension & Community Development
    • /
    • v.27 no.3
    • /
    • pp.125-134
    • /
    • 2020
  • The regional centrality plays a very important role in national and regional planning and it is measured by data such as people, goods, and information flows among regions. The inter-regional flows are usually considered by only direct flows, yet indirect flows, which are generated accordingly from direct flows, are not critically considered. Most centrality studies have also hardly reflected the indirect flow in the network analysis. This study demonstrates the significance of the indirect flows to enhance accuracy of the regional centrality. The nationwide dataset of inter-regional commuter traffic matrix is used in this study and analysed into two groups; one to consider only direct flow and the other both direct and indirect flows. The results indicate remarkable differences of centrality raking between two groups such as Yeongam of Jeonnam Province(+60th), Eumseong of Chungbuk Province(+57th), Gwacheon of Gyeonggi Province (-35th), and Nowon of Seoul (-32nd). It clearly shows the significant influence of indirect flow for regional centrality study. This also reveals regional centrality ranking in Korea by considering direct and indirect flows of commuters. Jung, Gangnam, and Jongno of Seoul are categorized in the highest rank group and Ulleung of Gyeongbuk, Ongjin of Incheon, and Jindo of Jeonnam are in the lowest group. The top group includes seven districts of Seoul, two of Busan, and one of Gyeonggi Province. The bottom group includes mostly island and costal areas. As this study shows an accurate method of centrality measurement, it has a significant implication to lead an effective regional planning.

Direct and indirect bonding of wire retainers to bovine enamel using three resin systems: shear bond strength comparisons (부착 유지장치의 직, 간접 부착법에 따른 전단 접착력 비교)

  • Kwon, Tae-Yub;Meina, Hu;Antoszewska, Joana;Park, Hyo-Sang
    • The korean journal of orthodontics
    • /
    • v.41 no.6
    • /
    • pp.447-453
    • /
    • 2011
  • Objective: We compared the shear bond strength (SBS) of lingual retainers bonded to bovine enamel with three different resins using direct and indirect methods. Methods: Both ends of pre-fabricated twisted ligature wires were bonded to bovine enamel surfaces using Light-Core, Tetric N-Flow, or Transbond XT. Phosphoric acid-etched enamel surfaces were primed with One-Step prior to bonding with Light-Core or Tetric N-Flow. Transbond XT primer was used prior to bonding with Transbond XT. After 24 hours in water at $37^{\circ}C$, we performed SBS tests on the samples. We also assigned adhesive remnant index (ARI) scores after debonding and predicted the clinical performance of materials and bonding techniques from Weibull analyses. Results: Direct bonding produced significantly higher SBS values than indirect bonding for all materials. The SBS for Light-Core was significantly higher than that for Tetric N-Flow, and there was no significant difference between the direct bonding SBS of Transbond XT and that of Light-Core. Weibull analysis indicated Light-Core performed better than other indirectly bonded resins. Conclusions: When the SBS of a wire retainer is of primary concern, direct bonding methods are superior to indirect bonding methods. Light-Core may perform better than Transbond XT or Tetric N-Flow when bonded indirectly.

A Study on the Spray and Combustion Characteristics of Gasoline Direct Injector (가솔린 직분식 인젝터의 분무 및 연소특성에 관한 연구)

  • 신민규;박종호;유철호;이내현;최규훈
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.5 no.5
    • /
    • pp.114-122
    • /
    • 1997
  • Nowadays, gasoline direct injection engines are being commercialized by virtue of improvement in control technology of spray, flow, air fuel ratio. The stratified charge type has the advantage of improving lean limit. The homogeneous type has the advantage of reducing engine-out hydrocabon emissions in the first 30 seconds after a cold start, in addition, improving transient air fuel ratio control. The vaporization and mixing if injected fuel with air has to e completed in a short time and the fuel film in cylinder and on piston has to be minimized. So, the flow and injection should be well controlled. This paper surveyed the spray characteristics of gasoline direct injection by using laser equipment and the combustion characteristics of the single cylinder engine using homogeneousas-mixture type gasoline direct injection.

  • PDF

A Study on Efficient Management of Bicycle Traffic Flow at Four-Legged Intersections (4지 신호교차로에서 효율적 자전거 교통류 처리방안 연구)

  • Mok, Sueng Joon;Kim, Eung Cheol;Heo, Hee Bum
    • International Journal of Highway Engineering
    • /
    • v.15 no.3
    • /
    • pp.177-189
    • /
    • 2013
  • PURPOSES: This study aims to suggest a proper left-turn treatment method for the bicycle traffic flow at four-legged intersections. METHODS: Four types of crossing methods are proposed and analyzed : (1) indirect left turn, (2) direct left turn, (3) direct left turn on a Bike Box, and (4) direct left turn on bike left turn lane. The VISSIM simulation tests were conducted based on forty-eight operation scenarios prepared by varying vehicle and bicycle traffic volumes. RESULTS : The results from the four-legged signalized intersections suggest that (1) the indirect left turn is appropriate when vehicle demand is high, (2) the direct left turn is efficient on most traffic situation but the safety is a concern, (3) the direct left turn on a Bike Box is appropriate when bicycle demand is high while vehicle demand is not, and (4) the direct left turn on a bike left turn lane is appropriate when both vehicle and bicycle demand are low. CONCLUSIONS : The direct left turn of bicycle provides more efficiency than the indirect left turn at the four-legged intersections but to apply the methods and to study more, advanced evaluation methods, related law, and insurance programs are needed.

Design of Optimal Capacity Coefficients of Flow Control Valves in the Hoist Hydraulic System Using the Complex Method (콤플렉스법에 의한 호이스트 유압회로 유량제어밸브의 최적유량계수 설계)

  • Lee, S.R.
    • Transactions of The Korea Fluid Power Systems Society
    • /
    • v.4 no.1
    • /
    • pp.1-6
    • /
    • 2007
  • The typical hydraulic system of hoist is composed of a hydraulic supply unit, a directional control valve, two pilot operated check valves, two flow control valves. The capacity coefficients of flow control valves should be adjusted for the hoist to operate at moderate speed and minimize the hydraulic energy loss. However, it is difficult to adjust the four capacity coefficients of flow control valves by trial and error for optimal operation. The steady state model of the hoist hydraulic system is derived and the optimal capacity coefficients of flow control valves are obtained using the complex method that is one kind of constrained direct search method.

  • PDF

An Experimental Study on Lift Force Generation Resulting from Spanwise Flow in Flapping Wings

  • Hong, Young-Sun
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.7 no.2
    • /
    • pp.86-103
    • /
    • 2006
  • Using a combination of force transducer measurement to quantify net lift force, high frame rate camera to quantify and subtract inertial contributions, and Digital Particle Image Velocimetry (DPIV) to calculate aerodynamic contributions in the spanwise plane, the contribution of spanwise flow to the generation of lift force in wings undergoing a pure flapping motion in hover is shown as a function of flapping angle throughout the flapping cycle. These experiments were repeated at various flapping frequencies and for various wing planform sizes for flat plate and span wise cambered wings. Despite the previous identification of the importance of span wise fluid structures in the generation of lift force in flapping wings throughout the existing body of literature, the direct contribution of spanwise flow to lift force generated has not previously been quantified. Therefore, in the same manner as commonly applied to investigate the chordwise lift distribution across an airfoil in flapping wings, spanwise flow due to bulk flow and rotational fluid dynamic mechanisms will be investigated to validate the existence of a direct component of the lift force originating from the flapping motion in the spanwise plane instead.

LARGE EDDY SIMULATION OF TURBULENT FLOWS AND DIRECT/DECOUPLED SIMULATIONS OF AEROACOUSTICS - PRESENT STATUS AND FUTURE PROSPECT -

  • Kato, Chisachi
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2010.05a
    • /
    • pp.2-4
    • /
    • 2010
  • Due to rapid progress in the performance of high-end computers, numerical prediction of fluid flow and flow-induced sound is expected to become a vital tool for aero- and hydro- dynamic design of various flow-related products. This presentation focuses on the applications of large-scale numerical simulations to complex engineering problems with a particular emphasis placed on the low-speed flows. Flow field computations are based on a large eddy simulation that directly computes all active eddies in the flow and models only those eddies responsible for energy dissipations. The sound generated from low-speed turbulent flows are computed either by direct numerical simulation or by decoupled methods, according to whether or not the feedback effects of the generated sound onto the source flow field can be neglected. Several numerical examples are presented in order to elucidate the present status of such computational methods and discussion on the future prospects will also be given.

  • PDF

A Path Analysis on Compulsive Buying Tendency of University Students : Demographics, Variables Related to Credit Card and Flow (대학생 소비자의 충동구매성향에 대한 인과적 분석 : 인구통계학적 변인, 신용카드 관련 변인, 플로우 개념을 중심으로)

  • 주문자;김영신
    • Journal of Families and Better Life
    • /
    • v.22 no.5
    • /
    • pp.47-58
    • /
    • 2004
  • In this article the relations between demographics, variables related to credit card, flow and compulsive buying tendency were explored. The survey data collected from 318 university students. The results of regression analysis showed that older students were related to the greater number of card. The greater allowance and number of card were related to the greater average card expenditure per month. Female, younger and the greater average card expenditure per month were related to greater flow. And younger students tended to be more compulsive buying tendency than older students. The greater allowance and flow were related to greater compulsive buying tendency. The results of path analysis showed that the age, allowance and flow influenced on compulsive buying tendency direct. Also age and allowance influenced on compulsive buying tendency direct and indirect.