• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.30-40
• /
• 2019

Extraction of fabrication documents is very important because it provides information related to tasks of fabrication and construction. Therefore, in the case of a prefabricated member such as a steel structure, it is necessary to improve the productivity of fabrication documents through 3D BIM. However, research and evidence data on direct comparison analysis of 3D BIM-based documents extraction versus 2D CAD-based documents extraction are hard to find. Thus, this study focuses on productivity analysis of 3D BIM based fabrication documents extraction. In this study, the productivity data of fabrication documents extraction for module construction of EPC project was analyzed. For the productivity analysis, a case study on the fabrication documents of Module A (1,965 sheets) and Module B (1,216 sheets) was conducted. Fabrication documents for each module include general arrangement drawing, assembly drawing, single part drawing and single plate drawing. Comparison of 2D CAD based fabrication documents extraction and 3D BIM based fabrication documents extraction, the productivity for the entire work was improved from 17 hours to 16 hours for Module A and 12 hours to 7 hours for Module B. Especially, the productivity of the assembly drawings, which occupies a large part of the fabrication documents, was improved by about 48.75% from the total time required from 281 hours to 144 hours.

• Mycobiology
• /
• 제38권1호
• /
• pp.33-38
• /
• 2010

We have successfully applied the nested PCR to detect Cylindrocarpon destructans, a major pathogen causing root rot disease from ginseng seedlings in our former study. The PCR assay, in this study, was used to detect the pathogen from soils. The nested PCR using internal transcribed spacer (ITS) 1, 4 primer set and Dest 1, 4 primer set maintained the specificity in soils containing various microorganisms. For a soil DNA extraction method targeting chlamydospores, when several cell wall disrupting methods were tested, the combination of lyophilization and grinding with glass beads, which broke almost all the chlamydospores, was the strongest. The DNA extraction method which was completed based on the above was simple and time-saving because of exclusion of unnecessary stages, and efficient to apply in soils. As three ginseng fields whose histories were known were analyzed, the PCR assay resulted as our expectation derived from the field information. The direct PCR method will be utilized as a reliable and rapid tool for detecting and monitoring C. destructans in ginseng fields.

• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.258-264
• /
• 2001

본 논문에서는 직접 보상전압 추출기법을 이용한 새로운 직렬형 능동전력필터의 제어법을 제안한다. 제안된 직렬형 능동전력필터는 비선형 부하를 갖는 3상 3선식 전력계통에 병렬 수동필터와 함께 사용되어 병렬 수동필터의 단점을 보완하고, 전원측 고조파 저감 효과를 극대화시키는데 기여한다. 제안된 제어법은 직렬형 능동전력필터의 보상전압을 성능함수에 의해 상변환 없이 직접 추출할 수 있다. 따라서 기존의 방법에 비해 연산시간이 짧고, 제어가 보다 간단하다. 실험결과는 제안된 제어법을 이용한 시스템이 고조파 저감에 우수한 성능을 나타냄을 입증한다.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.97-102
• /
• 2016

Image stitching is a process of combining two or more images with overlapping area to create a panorama of input images, which is considered as an active research area in computer vision, especially in the field of augmented reality with 360 degree images. Image stitching techniques can be categorized into two general approaches: direct and feature based techniques. Direct techniques compare all the pixel intensities of the images with each other, while feature based approaches aim to determine a relationship between the images through distinct features extracted from the images. This paper proposes a novel image stitching method based on feature pixels with approximated clustering filter. When the features are extracted from input images, we calculate a meaning of the minutiae, and apply an effective feature extraction algorithm to improve the processing time. With the evaluation of the results, the proposed method is corresponding accurate and effective, compared to the previous approaches.

• 한국해양공학회지
• /
• 제38권4호
• /
• pp.174-186
• /
• 2024

In coastal video monitoring, the direct linear transform (DLT) method with ground control points (GCPs) is commonly used for geo-rectification. However, current practices often overlook the impact of GCP quantity, arrangement, and the geographical characteristics of beaches. To address this, we designed scenarios at Chuam Beach to evaluate how factors such as the distance from the camera to GCPs, the number of GCPs, and the height of each point affect the DLT method. Accuracy was assessed by calculating the root mean square error of the distance errors between the actual GCP coordinates and the image coordinates for each setting. This analysis aims to propose an optimal GCP placement method. Our results show that placing GCPs within 200 m of the camera ensures high accuracy with few points, whereas positioning them at strategic heights enhances shoreline extraction. However, since only fixed cameras were used in this study, factors like varying heights, orientations, and resolutions could not be considered. Based on data from a single location, we propose an optimal method for GCP placement that takes into account distance, number, and height using the DLT method.

• Preventive Nutrition and Food Science
• /
• 제21권2호
• /
• pp.138-146
• /
• 2016

In this study, we report the optimal extraction conditions for obtaining organosulfur compounds, such as cycloalliin, from garlic by using principal component analysis (PCA). Extraction variables including temperature ($40{\sim}80^{\circ}C$), time (0.5~12 h), and pH (4~12) were investigated for the highest cycloalliin yields. The cycloalliin yield (5.5 mmol/mL) at pH 10 was enhanced by ~40% relative to those (~3.9 mmol/mL) at pH 4 and pH 6. The cycloalliin level at $80^{\circ}C$ showed the highest yield among the tested temperatures (5.05 mmol/mL). Prolonged extraction times also increased cycloalliin yield; the yield after 12 h was enhanced ~2-fold (4 mmol/mL) compared to the control. Isoalliin and cycloalliin levels were inversely correlated, whereas a direct correlation between polyphenol and cycloalliin levels was observed. In storage for 30 days, garlic stored at $60^{\circ}C$ (11 mmol/mL) showed higher levels of cycloalliin and polyphenols than those at $40^{\circ}C$, with the maximum cycloalliin level (13 mmol/mL) on day 15. Based on the PCA analysis, the isoalliin level depended on the extraction time, while cycloalliin amounts were influenced not only by extraction time, but also by pH and temperature. Taken together, extraction of garlic at $80^{\circ}C$, with an incubation time of 12 h, at pH 10 afforded the maximum yield of cycloalliin.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권2호
• /
• pp.137-141
• /
• 2011

The extraction of an impacted third molar tooth is associated with many complications during the procedure and postoperative care. These complications include bleeding, swelling, pain, infection, as well as root fracture, proximal tooth injury, alveolar bone fracture, lingual nerve and inferior alveolar nerve injury etc. With the exception of a fractured root dislocation in the submandibular space, no direct submandibular gland injury related to extraction surgery has been reported until now. A 40 year old man visited the department of oromaxillofacial surgery at Yeouido St. Mary's Hospital for an extraction of the right mandible third molar. A partial third molar impaction was diagnosed by a clinical and radiographic examination. A surgical tooth extraction was practiced including buccal cortical bone osteotomy. During socket curettage, an encapsulated cyst-like lesion and a verified $3{\times}3\;cm$ neoplasm in the apically lingual direction were found during process of dissection. A biopsy confirmed that the neoplasm involved the submandibular gland and nerve trunk. This unusual anatomical organ injury during the surgical tooth extraction procedure is reported as a new complication during impacted third molar extraction.

• 산경연구논집
• /
• 제14권10호
• /
• pp.1-9
• /
• 2023

Purpose: In an increasingly globalized world, foreign direct investment (FDI) plays an essential role in the economic improvement of countries. This study aims to delve into the topic of overseas direct investment (FDI) and offer a complete analysis of its strategic advantages and disadvantages. By thoroughly examining the present literature, this study aims to discover and explore the diverse advantages and drawbacks. Research design, data and methodology: The information analysis system systematically and rigorously examined the selected studies. The evaluation will follow a thematic technique in which conventional subject matters and styles associated with FDI's strategic benefits and downsides can be recognized and synthesized. Data extraction contained relevant facts from the chosen research, along with the study objectives. Results: This study provides the findings of the, which explores the strategic advantages and disadvantages of foreign direct investments (FDI) primarily based on the evaluation of previous research. A comprehensive review of the identified benefits and drawbacks highlights their implications for businesses engaged in FDI. Conclusions: In sum, the findings offer valuable insights for practitioners, guiding their decision-making methods in the international commercial enterprise landscape. Organizations can function for fulfillment and sustainable development in the global marketplace by leveraging the advantages and effectively managing demanding situations.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3196-3202
• /
• 2012

Post-synthesis is used to synthesize organic hybrid inorganic mesoporous sieves. In this method, the activity and structure of the base sieve are crucial to obtain the definable hybrid materials. The chemical and physical properties of the base can be largely changed either by the final step of its synthesizing processes, by template removal which is accomplished with the oxidative thermal decomposition (burning) method or by solvent extraction method. In this paper we compared two methods for the post-synthesis of organic hybrid MCM-48. When the template was extracted with HCl/alcohol mixture, the final product showed larger pore size, larger pore volume and better crystallinity compared to the case of the thermal decomposition. The reactivity of the surface silanol group of template free MCM-48 was also checked with an alkylsilylation reagent $CH_2=CHSi(OC_2H_5)_3$. Raman and $^{29}Si$ NMR spectra of MCM-48 in the test reaction indicated that more of the organic group was grafted to the surface of the sample after the template was removed with the solvent extraction method. Direct synthesis of vinyl-MCM-48 was also investigated and its characteristics were compared with the case of post-synthesis. From the results, it was suggested that the structure and chemical reactivity can be maintained in the solvent extraction method and that organic grafting after the solvent extraction can be a good candidate to synthesize a definable hybrid porous material.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권1호
• /
• pp.82-86
• /
• 2001

저자 등은 하악 우측 제3대구치 발거 후 발치와를 통해 하악골에 이환되어 발생한 경안부 방선균증에서 병소부의 적출술과 소파술을 시행하고, 항생제 요법 및 개방창 유지등의 방법을 통해 양호한 경과를 보였기에 문헌고찰과 함께 보고하는 바이다.