• 무역상무연구
• /
• 제69권
• /
• pp.327-348
• /
• 2016

Under the Korean legal system, as an actual carrier is not the contractual party to the contract for carriage of goods by sea, it has been tortiously liable for the damage to, or loss of cargo, should there be the negligence by its part. However, the Rotterdam Rules introduces a revolutionary liability regime for the actual carrier. According to the Rotterdam Rules, the liability of the actual carrier is same with that of a contractual carrier with the result that a shipper is entitled to bring the direct action to the actual carrier, as well as the contractual carrier on the same basis. Nevertheless, it is expected to take long time for the new approach in respect of actual carrier's liability to be confirmed by many countries, and furthermore most of shipping countries including Korea still adopt the Hague-Vis by Rules where the shipper is not allowed to bring the direct action to the actual carrier. This study reviews on whether or not the alteration of actual carrier's liability based on Rotterdam Rules would be reasonable, considering the current Korean legal system. Furthermore, this study, whilst recognizing that the overall introduction of the new liability regime is somewhat premature, suggests the imposition of contractual liability to the actual carrier from a long-term perspective. Having in mind that the article 809 of the Korean Commercial Act allows the shipper to bring the direct action to the shipowner only in the case that a time charterer is the contractual carrier, this study explores a method to apply the contractual liability to the actual carrier in the case that a slot charterer or freight forwarder is the contractual carrier, in order to establish the uniform liability system.

• 한국통신학회논문지
• /
• 제28권6A호
• /
• pp.425-432
• /
• 2003

본 논문에서는 직접변환방식을 이용한 CDMA 기지국용 멀티캐리어 디지털 송신기를 설계하고 시뮬레이션을 통해 그 성능을 검증해 보았다. 먼저, 멀티캐리어 송신기를 설계하기 위해 필요한 새로운 기술들을 검토해보고, 이 새로운 기술을 적용하여 멀티캐리어 송신기를 설계하고 시뮬레이션 하였다. 설계와 시뮬레이션은 Agilent Technologies사의 RF 시뮬레이션 S/W인 ADS (Advanced Design System)을 사용하였으며, 디지털 블록과 아날로그 블록으로 나누어 설계한 후 두 블록을 co-simulation하여 결과를 분석하였다. 결과에 의하면, 직접변환방식을 이용하여 멀티캐리어 디지털 송신기를 구현한 경우 최종 아날로그출력이 시스템의 요구조건 (IS-97 & 3G TS 25.104) 인 스펙트럼 마스크 특성을 만족하였다. 이것은 제안한 멀티캐리어 디지털 송신기의 성능이 CDMA 기지국에 적용될 수 있다는 것을 의미한다. 따라서, 본 논문에서 제안한 직접변환방식을 이용한 멀티캐리어 디지털 송신기는 향후 CDMA 기지국에 적용되어 구현될 때, 가격적으로나 기술적으로 한 단계 발전된 시스템을 구현할 수 있다.

• ETRI Journal
• /
• 제19권1호
• /
• pp.1-12
• /
• 1997

In this paper, we present an improved multicarrier direct sequence (DS) code division multiple access (CDMA) scheme by modifying the system originally proposed by Kondo and Milstein [13]. In this modified system, different spreading sequences multiplied by a data sequence modulate different carriers. This is to prevent the multiple access capability from reducing when the fading characteristics of different carrier frequencies are highly correlated. We have derived a formula which determines the mean values of the relative received signal strength in a single carrier DS CDMA rake system and in a multicarrier DS-CDMA system. We present results on the comparison of the bit error rate (BER) performance of the two systems including the effect of correlation between fading characteristics of different frequencies under various multipath fading conditions. The results indicate that with 50 users the modified multicarrier DS CDMA system can achieve an uncoded irreducible BER of $1.7{\times}10^{-3}$ with an average received signal-to-noise ratio per bit of 10dB, which is better that $3.0{\times}10^{-3}$ achieved by the single carrier DS CDMA rake system, and also show that if multicarrier CDMA system is used with respect to single carrier CDMA system, the SNR gain is up to 4.5 dB for the uncode BER of $10^{-3}$ being achieved.

• 한국시뮬레이션학회논문지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2006

현재 반도체 산업은 200mm 웨이퍼에서 300mm 웨이퍼 공정으로 기술이 변화하고 있다. 300mm 웨이퍼 제조업체들은 Fabrication Line (FAB Line) 자동화를 비용절감 실현의 방책으로 사용하고 있다. 또한 기술의 확산, 시장 경쟁력의 격화 등으로 생산성 향상에 의한 원가절감이 반도체 산업 성장의 근본요인이 되고 있다. 대부분의 반도체 업체들은 생산성을 높이기 위해 average cycle time을 줄이는데 총력을 기울이고 있다. 본 논문에서는 average cycle time을 줄이는 데 중점을 두고, 300mm 반도체 제조공정을 시뮬레이션 하였다.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.353-358
• /
• 1991

Fine powders of the 2212 superconducting phase of bismuth system have been prepared directly from solution using ultrasonic spray pyrolysis. The fine superconducting powders produced by pyrolysis were characterized for the size, shape, and crystalline phase by SEM and XRD. The pyrolysis temperature, flow rate of the carrier gas, residence time of the droplets greatly influenced the size, shape, and crystalline phase. The optimum temperature and flow rate of the carrier gas for the preparation of fine powders of the 2212 superconduting phase were found to be 830$^{\circ}C$and 3ι/min, respectively.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.299-306
• /
• 2010

This paper proposes a new doubly-fed induction generator (DFIG) system using a matrix converter controlled by direct duty ratio pulse-width modulation (DDPWM) scheme. DDPWM is a recently proposed carrier based modulation strategy for matrix converters which employs a triangular carrier and voltage references in a voltage source inverter. By using DDPWM, the matrix converter can directly and effectively generate rotor voltages following the voltage references within the closed control loop. The operation of the proposed DFIG system was verified through computer simulation and experimental works with a hardware simulator of a wind power turbine, which was built using a motor-generator set with vector drive. The simulation and experimental results confirm that a matrix converter with a DDPWM modulation scheme can be effectively applied for a DFIG wind power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.570-572
• /
• 2000

In this paper, we present the configuration of Direct Load Control System using TCP/Ethernet Module for the Load Management Europe and America has operated the DLC system by many communication system, and Taiwan, Japan has controlled the cooling load at peak hours of power system. Up to now, Many Researches for the DLC of communication method, so called, pager, power line carrier, ripple control, etc. has advanced. Now, we present new communication method for the DLC using TCP/Ethernet module which is widespread all over the world.

• 한국통신학회논문지
• /
• 제27권6B호
• /
• pp.569-578
• /
• 2002

This paper proposes a new multicarrier code division multiple access (CDMA) system. The proposed multicarrier CDMA system provides the advantages that the transmission bandwidth is more efficiently utilized by using divided spreading sequence, time and frequency diversity is achieved in frequency selective nultipath (acting channel, and inter-carrier interference (ICI) can be minimized by using specific data and code pattern. In this system, transmitted data bits are serial-to-parallel converted to some parallel branches. On each branch each bit is direct-sequence spread-spectrum modulated by divided spreading sequences and transmitted using orthogonal carriers. The receiver providers a Rake for each carrier, and the outputs of Rakes are combined to get time and frequency diversity. This multicarrier CDMA system allows additional flexibility in the choice of system parameters. Upon varying system parameters, bit error rate (BER) performance is examined for the proposed multicarrier CDMA system. Simulation results show that the proposed multicarrier CDMA scheme can achieve better performance than the other types of conventional multicarrier CDMA systems.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.230.1-230.1
• /
• 2016

본 연구에서는 Host-Dopant system 기반 적색 인광 OLED의 Emitting layer(EML)에서 doping 위치에 따른 특성 변화를 분석하였다. EML은 host 물질로 60 nm 두께의 CBP를 사용하고, 적색 발광을 위해 10 %의 $Ir(btp)_2$를 CBP의 Front, Middle, Back side에 각각 20 nm씩 doping하였다. 본 구조의 적색 인광 OLED는 current density, luminance, efficiency, EL spectrum 등을 통해 전기적, 광학적 특성 변화를 확인하였다. Front, Back side에 doping으로 인한 CBP의 Energy level이 3.6 eV에서 1.9 eV로 감소하여 각각 HTL/EML, EML/HBL의 경계에 carrier direct injection이 활성화 되었고, 이로 인한 charge balance의 저하를 확인하였다. EL spectrum결과 각 소자는 CBP의 618 nm 파장 외에도, 추가적으로 TPBi의 398 nm, NPB의 456 nm의 파장을 보였다. 이를 통해 doping 위치에 따라 exciton이 형성되는 recombination zone이 이동하고 있음을 확인하였고, Front side는 6 V의 인가전압에서는 발광 파장이 398 nm에서 높은 값을 보이나 8 V, 10 V, 12 V에서 618 nm에서 높은 값을 보이는 것으로 인가전압에 의해 recombination zone이 HTL쪽으로 이동되는 것 또한 확인하였다.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.289-297
• /
• 2021

We describe a comb-mode resolving spectroscopic technique by direct time-domain phase correction of unstable interferograms obtained from loosely locked two femtosecond lasers. A low-cost continuous wave laser and conventional repetition rate stabilization method were exploited for locking carrier and envelope phase of interferograms, respectively. We intentionally set the servo control at low bandwidth, resulting in severe interferograms' fluctuation to demonstrate the capability of the proposed correction method. The envelope phase of each interferogram was estimated by a quadratic fit of carrier peaks to correct timing fluctuation of interferograms in the time domain. After envelope phase correction on individual interferograms, we successfully demonstrated 1 Hz linewidth of RF comb-mode over 200 GHz optical spectral-bandwidth with 10-times signal-to-noise ratio (SNR) enhancement compared to the spectrum without correction. Besides, the group delay difference between two femtosecond pulses is successfully estimated through a linear slope of phase information.