• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.200-210
• /
• 2018

Objectives: The purpose of this study is to assess the exposure to ozone and total volatile organic compounds(TVOCs) generated during welding work at a shipyard and recommend respiratory protective equipment(RPE) adequate against these hazards. Method: Ozone was collected for about 30 minutes at two-minutes intervals using a direct reading instrument, specifically an ozone analyzer(Serinus 10, Ecotech, Australia). TVOCs were collected for about 30 minutes at three-minute intervals using a portable GC (Alpha 115, Synspec BV, the Netherlands), and were determined simultaneously by area sampling at the welding plume closest to the welder's breathing zone. The total measurements were 162 for ozone($CO_2$ welding 47, TIG 60, stick 55), and 136 for TVOCs($CO_2$ 65, TIG 50, stick 21). Based on these measurements, a literature survey was conducted to assess the adequacy of RPE. Results: Relative to Korean OEL, measurements above STEL 0.2 ppm were 23.4% for $CO_2$, 63.3% for TIG and 14.5% for stick welding. There were significant differences(p=<0.0001) among welding types. Compared with ACGIH peak exposure of 0.4 ppm for ozone, which is not applied in Korea, $CO_2$ welding exceeded it by 10.6%, TIG by 40.0% and stick by 7.3%. Although it was not feasible to compare them directly since there are no Korean OEL, TVOCs had very high levels similar to the concentrations before moving into a new apartment and about 10-20 times the indoor air quality recommendations for some individual measurements. Conclusions: As ozone removal RPE has been recommended in welding environments for a long time(Lunau, 1967), this fact was demonstrated based on the results of the on-site work environment measurements(ozone and TVOCs). In conclusion, for all welding at a shipyard, gas/vapor and particulate combination RPE are recommended. If this is not possible, it should at least be present for TIG welding.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.322-327
• /
• 2003

It is important to know the accurate radionuclide inventory of radioactive waste for the reliable management. However, estimation of radionuclide concentrations in drummed radioactive waste is difficult and unreliable because of difficulties of direct detection, high cost, and radiation exposure of sampling personnel. In order to overcome these difficulties, scaling factors (SFs) have been used to assess the activities of radionuclides that could not be directly analyzed. A radionuclide assay system has been operated at KORI site since 1996 and consolidated scaling factor method has played a dominant role in determination of radionuclides concentrations. However, some problems are still remained such as uncertainty of estimated scaling factor values, inaccuracy of analyzed sample values, and disparity between the actual and ideal correlation pairs and the others. Therefore, it needs to improve the accuracy of scaling factor values. The scope of this paper is focused on the improvement of accuracy and representativeness of calculated scaling factor values based on statistical techniques. For the selection of reliable activity determination method, the accuracy of estimated SF values for each activity determination method is compared. From the comparison of each activity determination methods, it is recommended that SF determination method should be changed from the arithmetic mean to the geometrical mean for more reliable estimation of radionuclide activity. Arithmetic mean method and geometric mean method are compared based on the data set in KORI system.

• Health Policy and Management
• /
• v.21 no.4
• /
• pp.493-510
• /
• 2011

Objectives : This study aims to explore how social support and social network are related with health behavior. Methods : The target population was 12,449 people in Chungcheongbuk-do. The sample was accrued for the period of 3 months in 2008 by face to face interview of direct visiting from systematic sampling method. The instruments used in this study were social support, social network and health behavior. Results : There was significant difference in the level of social support and social network by sex, age, educational level, occupation, and monthly income(p<0.05). There was significant difference in the level of social support by alcohol drinking, physical exercise. There was significant difference in the level of social network by smoking, alcohol drinking, physical exercise, obesity(p<0.05). Multivarite analysis shows significant difference in the level of social instrumental support by smoking, physical exercise. It shows significant difference in the level of social emotional support by smoking. It also shows significant difference in the level of social network by smoking, physical exercise. Conclusion : These results suggest that social support and social network may be associated with health behavior. Because this study was cross sectional research, the order was not found between social support, social network and health behavior. Through a study on monitoring, we will obtain more information for relationship.

• Korean Journal of Social Welfare
• /
• v.60 no.3
• /
• pp.151-176
• /
• 2008

The purpose of this study is to see the effects of school climate on school violence and fears of attending school. The direct relationship between school climates and fears of attending school will be examined, as well as the indirect and mediated effects of school violence in that school climates influence the fears of attending school. A theoretical model of the relationships of school climates, school violence, and fears of attending school will be given. The subjects of the surveys were chosen from 12 junior high schools in the Seoul, Gyeonggi area through convenience sampling. 1,317 surveys were then analyzed. School climates directly affect the fear of going to school through the mediums of peer and teacher violence. The derived results stress the necessity of improving school climates in order to reduce violence from peers and teachers and to reduce fear of attending school.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.685-694
• /
• 1998

Protection of groundwater resources from contamination has been of increasing concern throughout the past decades. In practice, however, groundwater monitoring is performed based on the experience and intuition of experts or on the convenience. In dealing with groundwater contamination, we need to know what contaminants have the potential to threat the water quality and the distribution and concentration of the plumes. Monitoring of the subsurface environment through remote geophysical techniques or direct sampling from wells can provide such information. Once known, the plume can be properly managed. Evaluation of existing methodologies for groundwater monitoring network design revealed that one should select an appropriate design method based on the purpose of the network and the availability of field information. Integer programming approach, one of the general purpose network design tools, and a cost to-go function evaluation approach for special purpose network design were tested for field applicability. For the sam contaminated aquifer, two approaches resulted in different well locations. The amount of information, however, was about the same.

• Journal of the Korean Geophysical Society
• /
• v.8 no.2
• /
• pp.81-87
• /
• 2005

Acquisition and processing of vector seismic waves were conducted through simultaneous generation of P, SH, and SV waves and receiving those waves using three-component geophones. Test data were received by 24 8-Hz geophones at an interval of 2 m along a 94-m profile. The data were recorded for 512 ms with sampling intervals of 0.2 ms. Raw data indicate that both reflected and refracted P waves are strongly recorded on the vertical component while SH waves are significant on the transverse horizontal component. On the inline horizontal component, both direct P and converted PS waves are recorded. First arrivals of P and SH waves were detected simultaneously on the vertical and transverse horizontal axes, respectively. The recorded vector data were separately inverted using traveltime tomography to yield P- and SH-wave sections. Using those two velocity sections, Poisson's ratios were able to be obtained effectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.2
• /
• pp.141-152
• /
• 2013

This study investigated the effects of image on the preference and intake frequency of 19 vegetables. A total of 359 usable surveys were collected using a convenient sampling method. The subjects included females (51.8%), university students (50.7%), home residents (66.9%) and subject's spending 20,000~40,000 won on meals/week (41.5%) and eat out 2~3 times/week (29.5%). The intake frequency of vegetables was 2~3 times per month. The healthy image of all vegetables was good overall and the average preference was 3.78 (out of 5 on the Likert). Tomatoes had the healthiest image, onions the highest preference, and Korean cabbage the highest intake frequency. For males, the vegetable with the healthiest image was sesame leaf, while the healthiest foods for females were broccoli and tomatoes. Elementary students had a healthier image of cucumber, bean sprouts, radish, sesame leaf, lettuce, radish leaf, and cabbage than university students and adults. Home residents had a healthier image of cabbage and burdock than other types of residents. Subject that st over 20,000 won per week on meals had a higher image of most vegetables. In terms of preference, males liked Korean cabbage, green pumpkin, balloon flower roots, radish leaf, and lotus root, but female liked tomatoes. In addition, elementary students, home residents, and subjects who eat out less often tended to prefer vegetables. In terms of intake, there was a high frequency of intake for all vegetables in adults. Home residents specifically had a higher intake of cucumber, carrot, bean sprouts, spinach, green pumpkin, balloon flower roots, lettuce, radish leaf, broccoli, burdock, lotus root, and tomato. Overall, the healthy image of vegetables had a positive influence on their preference and intake frequency. Therefore, to encourage the intake of vegetables, direct or indirect variables should be examined.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.114-123
• /
• 2005

A nonlinear speed control of a PMSM using a sequential parameter auto-tuning algorithm for servo equipments is presented. The nonlinear control scheme gives an undesirable output performance under the mismatch of the system parameters and load conditions. Recently, to improve the performance, an adaptive linearization scheme, a sliding mode control and an observer-based technique have been reported. Although a good performance can be obtained, the performance is not satisfactory any more under specific conditions such as a large inertia variation, a fast speed transient or an increased sampling time. The simultaneous estimation of principal parameters giving a direct influence on speed dynamics is generally not simple. To overcome this problem, a a sequential parameter auto-tuning algorithm at start-up is proposed, where dominant parameters are estimated in a prescribed regular sequence based on the method that one parameter is estimated during each interval. The proposed scheme is implemented on a PMSM using DSP TMS320C31 and the effectiveness is verified through simulations and experiments.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.130-139
• /
• 2012

Objectives: The purpose of this study is to evaluate the tire manufacturing work environments extensively and to identify workers' exposure to hazardous substances in various work processes. Methods: Personal air sampling was conducted to measure polycyclic aromatic hydrocarbons, carbon disulfide, 1,3-butadiene, styrene, methyl isobutyl ketone, methylcyclohexane, formaldehyde, sulfur dioxide, and rubber fume in tire manufacturing plants using the National Institute for Occupational Safety Health Manual of Analytical Methods. Noise, carbon monoxide, and heat stress exposure were evaluated using direct reading instruments. Past concentrations of rubber fume were assessed using regression analysis of total particulate data from 2003 to 2007, after identifying the correlation between the concentration of total particulate and rubber fume. Results: Workers were exposed to rubber fume that exceeded 0.6 mg/$m^3$, the maximum exposure limit of the UK, in curing and production management processes. Forty-seven percent of workers were exposed to noise levels exceeding 85 dBA. Workers in the production management process were exposed to $28.1^{\circ}C$ (wet bulb globe temperature value, WBGT value) even when the outdoor atmosphere was $2.7^{\circ}C$ (WBGT value). Exposures to other substances were below the limit of detection or under a tenth of the threshold limit values given by the American Conference of Governmental Industrial Hygienists. Conclusion: To better classify exposure groups and to improve work environments, examining closely at rubber fume components and temperature as risk indicators in tire manufacturing is recommended.

• Safety and Health at Work
• /
• v.5 no.2
• /
• pp.80-85
• /
• 2014

Background: Currently available questionnaires for evaluating the quality of worklife do not fully examine every factor related to worklife in all cultures. A tool in Thai is therefore needed for the direct evaluation of the quality of worklife. Our aim was to translate the Work-related Quality of Life Scale-2 (WRQLS-2) into Thai, to assess the validity and reliability of the Thai-translated version, and to examine the tool's accuracy vis-$\grave{a}$-vis nursing in Thailand. Methods: This was a descriptive correlation study. Forward and backward translations were performed to develop a Thai version of the WRQLS. Six nursing experts participated in assessing content validity and 374 registered nurses (RNs) participated in its testing. After a 2-week interval, 67 RNs were retested. Structural validity was examined using principal components analysis. The Cronbach's alpha values were calculated. The respective independent sample t test and intraclass correlation coefficient were used to analyze known-group validity and test-retest reliability. Multistate sampling was used to select 374 RNs from the In- and Outpatient Department of Srinagarind Hospital of the Khon Kaen University (Khon Kaen, Thailand). Results: The content validity index of the scale was 0.97. Principal components analysis resulted in a seven-factor model, which explains 59% of the total variance. The overall Cronbach's alpha value was 0.925, whereas the subscales ranged between 0.67 and 0.82. In the assessment results, the known-group validity was established for the difference between civil servants and university employees [F (7.982, 0.005) and t (3.351; p < 0.05)]. Civil servants apparently had a better quality worklife, compared to university employees. Good test-retest reliability was observed (r = 0.892, p < 0.05). Conclusion: The Thai version of a WRQLS appears to be well validated and practicable for determining the quality of the work-life among nurses in Thailand.