• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.561-568
• /
• 2023

Various defects occur in concrete structures due to internal and external environments. If there is a defect, it is important to efficiently identify and maintain it because there is a problem with the structural safety of concrete. However, recent deep learning research has focused on cracks in concrete, and studies on exfoliation and contamination are lacking. In this study, focusing on exfoliation and contamination, which are difficult to label, four models were developed and their performance evaluated through unlabelling method, filtering method, the convergence of transfer learning based k-means clustering. As a result of the analysis, the convergence model classified the defects in the most detail and could increase the efficiency compared to direct labeling. It is hoped that the results of this study will contribute to the development of deep learning models for various types of defects that are difficult to label in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.1023-1032
• /
• 2006

In this paper, a new method for the bridge maintenance is proposed to overcome the limit of the existing methods and to implement the preventive bridge maintenance system. The proposed method can establish the lifetime optimum maintenance strategy of the deteriorating bridges considering the life-cycle performance as well as the life-cycle cost. The lifetime performance of the deteriorating bridges is evaluated by the safety index based on the structural reliability and the condition index detailing the condition state. The life-cycle cost is estimated by considering not only the direct maintenance cost but also the user and failure cost. The genetic algorithm is applied to generate a set of maintenance scenarios which is the multi-objective combinatorial optimization problem related to the life-cycle cost and performance. The study examined the proposed method by establishing a maintenance strategy for the existing bridge and its advantages. The result shows that the proposed method can be effectively applied to deciding the bridge maintenance strategy.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.124-130
• /
• 2023

Recently, fan out wafer level packaging, which enables high integration, miniaturization, and low cost, is being rapidly applied in the semiconductor industry. In particular, FOWLP is attracting attention in the mobile and Internet of Things fields, and is recognized as a core technology that will lead to technological advancements such as 5G, self-driving cars, and artificial intelligence in the future. However, as chip density and package size within the package increase, FOWLP warpage is emerging as a major problem. These problems have a direct impact on the reliability and electrical performance of semiconductor products, and in particular, cause defects such as vacuum leakage in the manufacturing process or lack of focus in the photolithography process, so technical demands for solving them are increasing. In this paper, warpage simulation according to the thickness of FOWLP material was performed using finite element analysis. The thickness range was based on the history of similar packages, and as a factor causing warpage, the curing temperature of the materials undergoing the curing process was applied and the difference in deformation due to the difference in thermal expansion coefficient between materials was used. At this time, the stacking order was reflected to reproduce warpage behavior similar to reality. After performing finite element analysis, the influence of each variable on causing warpage was defined, and based on this, it was confirmed that warpage was controlled as intended through design modifications.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.195-209
• /
• 2024

The current road traffic signal controller developed in the 1990s has limitations in flexibility and scalability due to power supply problems, various communication methods, and hierarchical black box structures for various equipment and devices installed to improve traffic safety for road users and autonomous cooperative driving. In this paper, we designed a road traffic safety facilities equipment and devices integrated management system that can cope with the rapidly changing future traffic environment by solving the using direct current(DC) and power supply problem through the power over ethernet(PoE) technology and centralized data-driven control through message broker technology. In addition, a data-driven real-time control method for road traffic safety facilities equipment and devices operating based on time series data was implemented and verified.

• Archives of Plastic Surgery
• /
• v.51 no.1
• /
• pp.36-41
• /
• 2024

Background Among breast reconstruction methods, implant-based breast reconstruction has become the mainstream. However, periprosthetic infection is still an unresolved problem. Although published articles have revealed that limited use of antibiotics is sufficient to reduce infection rates, the number of surgeons still preferring elongated usage of antibiotics is not less. The aim of our study is to validate the appropriate duration of antibiotic use to reduce infection rate after implant-based breast reconstruction. Methods A retrospective study reviewed medical record of 235 patients (274 implants for reconstruction) who underwent prepectoral direct to implant breast reconstruction using acellular dermal matrix wrapping technique. Infection rates were analyzed for the patients administered postoperative prophylactic antibiotics until drain removal and those who received only perioperative prophylactic antibiotics for 24 hours. Results Of the 274 implants, 98 who were administered prophylactic antibiotics until drain removal had an infection rate of 3.06% (three implants) and 176 who received prophylactic antibiotics no longer than 24 hours postoperatively had an infection rate of 4.49% (eight implants). A total of 11 patients diagnosed with postoperative infection clinically, 8 were salvaged by antibiotic treatment, and 3 had implant removal and replacement with autologous flap. Postoperative antibiotic prophylaxis duration had no statistically significant effects in the risk of infection (p = 0.549). Conclusion The duration of prophylactic antibiotics after surgery was not related to infection risk. Further study with a large number of patients, randomized control study, and route of antibiotics is needed.

• Advances in nano research
• /
• v.16 no.5
• /
• pp.473-487
• /
• 2024

The current study employs the nonlocal Timoshenko beam (NTB) theory and von-Kármán's geometric nonlinearity to develop a non-classic beam model for evaluating the nonlinear free vibration of bi-directional functionally-graded (BFG) nanobeams. In order to avoid the stretching-bending coupling in the equations of motion, the problem is formulated based on the physical middle surface. The governing equations of motion and the relevant boundary conditions have been determined using Hamilton's principle, followed by discretization using the differential quadrature method (DQM). To determine the frequencies of nonlinear vibrations in the BFG nanobeams, a direct iterative algorithm is used for solving the discretized underlying equations. The model verification is conducted by making a comparison between the obtained results and benchmark results reported in prior studies. In the present work, the effects of amplitude ratio, nanobeam length, material distribution, nonlocality, and boundary conditions are examined on the nonlinear frequency of BFG nanobeams through a parametric study. As a main result, it is observed that the nonlinear vibration frequencies are greater than the linear vibration frequencies for the same amplitude of the nonlinear oscillator. The study finds that the difference between the dimensionless linear frequency and the nonlinear frequency is smaller for CC nanobeams compared to SS nanobeams, particularly within the α range of 0 to 1.5, where the impact of geometric nonlinearity on CC nanobeams can be disregarded. Furthermore, the nonlinear frequency ratio exhibits an increasing trend as the parameter µ is incremented, with a diminishing dependency on nanobeam length (L). Additionally, it is established that as the nanobeam length increases, a critical point is reached at which a sharp rise in the nonlinear frequency ratio occurs, particularly within the nanobeam length range of 10 nm to 30 nm. These findings collectively contribute to a comprehensive understanding of the nonlinear vibration behavior of BFG nanobeams in relation to various parameters.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.155-162
• /
• 2023

In nuclear power plants, the flow rate information is a major indicator of the performance of rotating equipment such as pumps, and is a very important one required for facility operation and maintenance. To measure a flow rate, various types of methods have been developed and used. Among them, the differential pressure type using orifice and the direct doppler type using ultrasonic waves are the most commonly used. However, these flow rate measurement methods have limitations in installation, conditions and status of the measuring part, etc. To solve this problem, we have studied a new technique for measuring flow rate from scratch. In this paper, we have devised a technique to estimate the flow rate using an average moving velocity of large-scale eddy in turbulence that occurs in the piping flow field. The velocity of the large-scale eddy can be measured using the pressure fluctuation signals on the inner surface of the pipe. To estimate the flow rate, at first a cross-correlation function is applied to the two pressure fluctuation signals located at different positions in the down stream for calculating the time delay between the moving eddies. In order to validate the proposed flow rate estimation method, CFD analyses for the internal turbulence flow in pipe are conducted with a fixed flow condition, where the pressure fluctuation signals on the pipe inner surface are simulated. And then the average flow velocity of the large scale eddy is to be estimated. The estimated flow velocity is turned out to be similar to the fixed (known) flow rate.

• Korean Journal of Culture and Social Issue
• /
• v.23 no.2
• /
• pp.295-332
• /
• 2017

The main purpose of this research is to analyze stress, social support and coping behavior of adults based on their level of self-efficacy. A total of 899 adults (399 male; 500 female), each with a child attending either elementary and secondary school, participated in the study. The inter-rater reliability for the open-ended questionnaire utilized in the study was 93.4%, with a Kappa coefficient of .92. The range of Cronbach α for the variables measured through a quantitative method was .87~.92. The results were as follows: First, the representative responses to the question about their most painful stress experiences were, financial difficulties, child rearing and duties of workplace. The Lower Efficacy group, compared to the Upper Efficacy group, responded much more with financial difficulties related responses. There were significant differences in the level of stress symptoms according to level of self-efficacy. The Lower Efficacy group expressed stronger levels of stress symptoms when compared to the Upper Efficacy group. Second, in terms of social support, the participants responded that they received the most help from their family members, followed by none(self), and friends. When comparing the two efficacy groups, the Upper Efficacy group responded most frequently that they received social support from their family members, whereas the Lower Efficacy group indicated none. There were significant differences in the level of relational conflicts according to the level of self-efficacy. The Upper Efficacy group showed much less conflict in parent-child relations, spousal relations and relations with their boss, compared to the Lower Efficacy group. Third, for the type of social support participants received, the most frequent response was emotional support, followed by none, and advice. Relatively, when comparing the two groups with each other, the Lower Efficacy group responded more frequently with none, whereas for the Upper Efficacy group responded more frequently with advice. There were significant differences in the amount of emotional support received according to level of self-efficacy. The Upper Efficacy group received much more emotional support from their spouses and their bosses compared to the Lower Efficacy group. Fourth, the most frequently adopted coping style to stress was self-regulation, followed by direct problem solving, and nothing(none). The most frequent response for the Upper Efficacy group was direct problem solving, whereas for the Lower Efficacy group was nothing(none). There was a significant difference in coping efficiency to stress according to level of self-efficacy. The Upper Efficacy group coped more efficiently with stress than the Lower Efficacy group.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• Science of Emotion and Sensibility
• /
• v.7 no.1
• /
• pp.65-81
• /
• 2004

With the arrival of the 21th century, the management environments such as the knowledge system, information system, and technology system surrounding small and medium enterprises are being rapidly changed. These rapidly changing the environment of enterprises like the above can be thought rather profitable for the elastic and resiling medium enterprises than large enterprises. Additionally, these environments are recognized as the management circumstances which provide with the change by which medium enterprises equipped with the trustworthy creativity in the 21th century are able to become the main player of the industrial development. The position and role of medium enterprises in the national economical system are very important. The execution of the local autonomy system and the policy to activate the local economy will generally enlarge the power of medium enterprises which are based on the concerned local society more ant more. But, by the standpoint of designer, it is pointed out that there is the problem that the effective application means or the availability of the industrial design was not sufficiently recognized or understood by the manager in enterprises. Notwithstanding the above problem, a lot of domestic small and medium enterprises became to apply the industrial design as the means for improving the competitiveness of their own products in the relatively short time powered by the governmental policy, and moreover both of the concerned partners(the manager and industrial designer) had the opportunity to newly recognize the industrial design and evaluate the availability or problem of the industrial design in the actual aspect. This event means very important change. With the understanding on the above situation, the purpose of this study is to recognize whether the design is strategically applied in the management level of domestic small and medium enterprises, whether the strategical establishment of the design management is performed without any problem, whether the field designer and CEO are well recognizing the design management and what their recognition level is in order to seek the new solution for plenty of problems. Therefore, the actual proof analysis was performed for the field designer and management CEO of small and medium enterprises with the questionnaire survey and direct interview method to understand the actuality of small and medium enterprises.