A 91-year-old female presented to Chonnam National University Hospital Regional Trauma Center with a lateral compression type III fracture of the pelvis. She was managed non-operatively for a week in the intensive care unit under close observation and had an emergency operation due to delayed onset of an acute obstructed direct inguinal hernia. Traumatic abdominal wall hernias are rare. However, trauma surgeons should always be aware of the possibility of such injuries because of their critical consequences.
Journal of the Institute of Convergence Signal Processing
/
v.18
no.1
/
pp.13-20
/
2017
In this paper, we evaluate the basic test results of the 32 Gbps observational equipment introduced as the back-end system for the wideband VLBI (Very Long Baseline Interferometry) observation of KVN (Korean VLBI Network). Radio astronomers want to make a large radio telescope that has excellent performance in order to observe the superfine structure of a celestial body, but a lot of money is needed. Therefore, in order to increase the sensitivity, the performance improvement of the receiving system and the method of observing the wide frequency bandwidth are introduced. To do this, we adopted a wideband sampling method for converting analog signals to digital with ultra-fast speeds and a wideband sampler for performing digital filtering in order to observe a wide observational frequency bandwidth. The wideband sampler (OCTAD-K) supports up to 16 Gsps-2bits sampling and supports a variety of observational bandwidth using digital filtering techniques. In particular, it is designed to support KVN's 4-frequency simultaneous observation system and VERA(VLBI Exploration of Radio Astrometry)'s 2-beam observation system. It can also support polKVN(Korean VLBI Network), KaVA(KVN and VERA Array), 32Gbps Direct Sampler, Digital Filter, Widebandarization observations and supports the standard VDIF(VLBI Data Interchange Format) format of observed data. In this paper, the performance of the system and the problem solving are described in detail after performing the factory inspection and field test before the system is introduced.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.125.1-125.1
/
2016
The excitonic insulator (EI), which is one of fundamental insulators, was theoretically proposed in 1967 but its material realization has not been established well. Only a few materials were proposed as EIs but their experimental evidences were indirect such as the renormalization of band dispersions or an anomaly in electrical resistivity. We conducted scanning tunneling microscopy / spectroscopy measurements and found out that $Ta_2$$NiSe_5$, which was the most recently proposed as an EI, had a metal-insulator phase transition with the energy gap of 700 meV at 78 K. Moreover, the spatially delocalized excitonic energy level was observed within the energy gap, which could be the direct evidence of the EI ground state. Our theoretical model calculation with the order parameter of 150 meV reproduces the spectral function and the excitonic energy gap very well. In addition, experimental data shows that the band character is inverted at the valence and conduction band edges by the exciton formation, indicating that the mechanism of exciton condensation is similar to the Bardeen-Cooper-Schrieffer (BCS) mechanism of cooper pairs in superconductors.
AlSi12 is a heat-resistant aluminum alloy that is lightweight, corrosion-resistant, machinable and attracting attention as a functional material in aerospace and automotive industries. For that reason, AlSi12 powder has been used for high performance parts through 3D printing technology. The purpose of this study is to observe deposition characteristics of AlSi12 powder in a direct energy deposition (DED) process (one of the metal 3D printing technologies). In this study, deposition characteristics were investigated according to various process parameters such as laser power, powder feed rate, scan speed, and slicing layer thickness. In the single track deposition experiment, an irregular bead shape and balling or humping of molten metal were formed below a laser power of 1,000 W, and the good-shaped bead was obtained at 1.0 g/min powder feed rate. Similar results were observed in multi-layer deposition. Observation of deposited height after multi-layer deposition revealed that over-deposition occurred at all conditions. To prevent over-deposition, slicing layer thickness was experimentally determined at given conditions. From these results, this study presented practical conditions for good surface quality and accurate geometry of deposits.
In this study, we have prepared a Ti-6Al-4V/V/17-4 PH composite structure via a direct energy deposition process, and analyzed the interfaces using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The joint interfaces comprise two zones, one being a mixed zone in which V and 17-4PH are partially mixed and another being a fusion zone in the 17-4PH region which consists of Fe+FeV. It is observed that the power of the laser used in the deposition process affects the thickness of the mixed zone. When a 210 W laser is used, the thickness of the mixed zone is wider than that obtained using a 150 W laser, and the interface resembles a serrated shape. Moreover, irrespective of the laser power used, the expected σ phase is found to be absent in the V/17-4 PH stainless steel joint; however, many VN precipitates are observed.
Nursing service, as the largest user of labor resources, has become concerned about appropriate allocation of staffing resources. Therefore, this project was designed to measure quantitatively the direct nursing care provided to patients and to develop a new patient classification system based on the direct nursing care activities. The initial step in the development of the classification instrument was to identify the content of direct nursing activities. The frequency with which these activities were carried out, the total time spent in carrying them out and the average time for one performance of each of the nursing activities was calculated. The next step was to select the items for the classification instrument taking into account these direct nursing activities. A list of 40 items was prepared. These items were then classified into 8 major categories: personal hygiene, moving & exercise, nutrition & elimination, observation, medication, treatment, collecting specimens and other care activities for severity ill patients. Each item was assigned a value unit based on the average time required by the nursing staff to complete the specific item. The third step was to determine the practicality of the items and value units, so an attempt was made to establish content validity for these items and units by obtaing a consensus from 8 head nurses, representing eight different departments. The 4th step was to conducted a pilot study to establish the score range for the classification boundaries. For this purpose an instrument was designed using the list of items and value units and a prepared classification criteria as a guideline to validate the patient classification. A judgment group consisting of 52 supervisory nurses and head nurses were asked to select the proper patient to fit each classification criteria and to fill out the instrument for each patient. The total value unit and the frequency for each classification group was calculated. According to the frequency distribution, the score range for the classification group was determined as follows : 0~15 for groupI, 16~30 for group II, 31~50 for group III, and above 51 for group IV. Finally a patient classification form was developed.
Purpose: This study aimed to estimate the appropriate nurse staffing ratio in intensive care units (ICUs) by measuring nursing workload based on patient's severity and needs, using the Korean Patient Classification System for critical care nurses. Methods: The data were collected from January 18 to February 29, 2016 using a standardized checklist by observation or self-report. During the study period, 723 patients were included to be categorized from I to IV using the patient classification system. Measurement of total nursing workload on a shift was calculated in terms of hours based on the time and motion method by using tools for surveying nursing activities. The nursing activities were categorized as direct nursing care, indirect nursing care, and personal time. Total of 127 cases were included in measuring direct nursing time and 18 nurses participated in measuring indirect and personal time. Data were analyzed using descriptive statistics. Results: Two patients were classified into Class I (11.1%), 5 into Class II (27.8%), 9 into Class III (50%), and two into Class IV (11.1%). The amount of direct nursing care required for Class IV (513.7 min) was significantly more than that required for Class I (135.4 min). Direct and indirect nursing care was provided more often during the day shift as compared to the evening or night shifts. These findings provided the rationale for determining the appropriate ratio for nursing staff per shift based on the nursing workload in each shift. Conclusions: An appropriate ratio of nurse staffing should be ensured in ICUs to re-arrange the workload of nurses to help them provide essential direct care for patients.
The direct viable count (DVC) and plate count (PC) methods was used to measure the number of bacteria in potable groundwater samples collected from bottled water from the market, mineral water, and edible groundwater near the urban areas and the stock farming congested areas. As a result, the number of living bacteria by DVC was comprised 30~80% of the total direct count (TDC), whereas the number of living bacteria by PC was around l~30% of DVC. Such results show that viable but non-culturable (VBNC) bacteria exist in the potable groundwater with high percentages. On the other hand, upon measuring the value from the conventional nutrient broth (NB), $10^-2$ fold diluted nutrient broth (DNB), and R2A broth, the values from the DNB and R2A showed 2~50 times higher than the conventional NB medium. These results indicate that oligotrophic bacterial groups which can multiply in the low nutrient broth abundantly exist in the oligotrophic environment like potable groundwater.
Hong, Seung Hwan;Cho, Hyoung Sig;Kim, Nam Hoon;Sohn, Hong Gyoo
KSCE Journal of Civil and Environmental Engineering Research
/
v.35
no.2
/
pp.525-531
/
2015
According to the increasing demand for 3D indoor spatial information, the utilization of a terrestrial laser scanner comes to the fore. However, the research for the comparison between a terrestrial laser scanning method and a traditional surveying method is insufficient. The paper evaluated the time-efficiency and the locational accuracy of an AMCW type and a direct TOF type of terrestrial laser scanning methods in comparison with the observation using a total station. As a result, an AMCW type showed higher time-efficiency than a direct TOF type and the RMSE between the two types of data was ${\pm}1mm$. Moreover, the terrestrial laser scanning method showed twice higher time-efficiency than the observation using a total station and the RMSE between the two data was ${\pm}3.4cm$. The results indicate that the terrestrial laser scanning method has better profitability and performance for 3D indoor modeling than the traditional survey using a total station. In the future, a terrestrial laser scanner can be efficiently utilized in the construction of 3D indoor spatial information.
Background: Medication errors are common but most often preventable events in any health care setup. Studies on medication errors involving chemotherapeutic drugs are limited. Objective: We studied three aspects of medication errors - prescription, transcription and administration errors in 500 cancer patients who received ambulatory cancer chemotherapy at a resource limited setting government hospital attached cancer centre in South India. The frequency of medication errors, their types and the possible reasons for their occurrence were analysed. Design and Methods: Cross-sectional study using direct observation and chart review in anmbulatory day care unit of a Regional Cancer Centre in South India. Prescription charts of 500 patients during a three month time period were studied and errors analysed. Transcription errors were estimated from the nurses records for these 500 patients who were prescribed anticancer medications or premedication to be administered in the day care centre, direct observations were made during drug administration and administration errors analysed. Medical oncologists prescribing anticancer medications and nurses administering medications also participated. Results: A total of 500 patient observations were made and 41.6% medication errors were detected. Among the total observed errors, 114 (54.8%) were prescription errors, 51(24.5%) were transcribing errors and 43 (20.7%) were administration errors. The majority of the prescription errors were due to missing information (45.5%) and administration errors were mainly due to errors in drug reconstitution (55.8%). There were no life threatening events during the observation period since most of the errors were either intercepted before reaching the patient or were trivial. Conclusions: A high rate of potentially harmful medication errors were intercepted at the ambulatory day care unit of our regional cancer centre. Suggestions have been made to reduce errors in the future by adoption of computerised prescriptions and periodic sensitisation of the responsible health personnel.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.