• 임산에너지
• /
• 제21권3호
• /
• pp.10-17
• /
• 2002

본 연구는 단소용 대나무 악기재를 효과적으로 건조하기 위하여 열처리 및 몇 가지 스케줄에 의한 건조를 실시하였다. 평균 직경 2.2cm, 길이 60cm정도의 솜대를 이용하였다. 열처리 효과를 평가하기 위하여 무처리 및 열처리재로 구분하였으며 적당한 건조 조건 조사를 위해서 20℃, 65%와 40℃, 40% 그리고 대기상태의 3가지 조건으로 실시하였다. 탄화와 재색의 결함이 발생하지 않는 열처리의 최적 온도 조건은 180℃정도가 적당하였으며 열처리가 할렬의 수와 할렬 크기의 발생을 줄였으며 건조결함을 발생하지 않는 최적의 조건은 온도 20℃, 관계습도 65%이지만 건조를 할 때 기간이 너무 많이 소요되는 단점이 있기 때문에 40℃, 40%에서 건조시키는 것이 더욱 효율적이었다.

• 플랜트 저널
• /
• 제5권4호
• /
• pp.73-79
• /
• 2009

Increase of consumption in limited coal reserves leads prices surging. As a result, iron works which produce products with coal are in difficulties. Accordingly, it is required a lot of research of using non-caking coal that is relatively low cost and has abundant reserves. Direct drying and indirect drying are two major methods of drying the coal. Recently, to minimize the needed calories and to save energy, using fluidbed or fluidizing method is a recent main trend of minimizing the size of the facility and maximizing energy efficiency. However there is also disadvantage such as increasing facility investment because of installing additional facilities in the latter part. In this study, we will have theoretical researches on the indirect drying method with heat exchange system which have been traditionally used. As a result it is expected to increase the efficiency of the facility operation.

• 대한토목학회논문집
• /
• 제40권1호
• /
• pp.51-58
• /
• 2020

달 탐사에 대한 관심이 늘어나면서 인공월면토를 포함한 달 지상 환경 모사에 대한 연구가 진행되고 있다. 인공월면토를 포함하여 진공환경을 조성할 때 발생하는 문제점 중의 하나는 토양에서 나오는 탈 가스로 인해 고진공에 도달하는 시간이 길어진다는 것이다. 이러한 탈 가스의 대부분은 수분이며, 진공챔버에 넣기 전 인공월면토의 표면에 붙어있는 수분을 제거하는 전처리 과정을 수행한다면 고진공에 도달하는 시간을 상당히 줄일 수 있다. 기존의 토양 건조 방법을 사용하여 각 방법이 인공월면토의 수분제거에 얼마나 효과적인지 확인하였다. 드라이 오븐을 이용한 방법, 마이크로웨이브 오븐을 이용한 방법, 직접가열 건조하는 방법과 진공 오븐을 이용한 방법을 이용하여 인공월면토 시료의 건조 실험을 수행하였으며, 건조 실험의 결과를 제시하였다. 실험결과 드라이 오븐에서 110℃로 건조하는 방법과 마이크로웨이브 오븐을 이용한 건조 방법은 수분제거 효과가 충분하지 않았으며, 200℃ 이상에서 진공오븐을 이용한 방법과 직접 가열하는 방법은 수분제거 효과가 좋았다.

• 한국식품과학회지
• /
• 제35권2호
• /
• pp.329-333
• /
• 2003

Fruits of 'Manita', a red pepper cultivar, and 'HL', a cultivar bred for single-harvest, cultivated by direct sowing method were harvested simultaneously. The red fruits were freeze-, sun-, indoor-, hot-air $(65^{\circ}C)$, and excessive hot-air (50% longer time) dried. For Manita. ASTA values of freeze- and indoor-dried red pepper were the highest $(153.6{\sim}168.4)$, and those of sun- and hot air-dried ones were $119.2{\sim}131.5$. Excessive hot-air drying decreased the redness by about $9{\sim}15%$ compared to normal hot-air drying. For HL, ASTA values $(150.3{\sim}171.7)$ of indoor-dried red peppers were much higher than other dried peppers. Red pigment in HL was destroyed easily during sun drying, showing values of only $49.2{\sim}69.2$. By excessive hot-air drying, the redness did not decrease, compared to normal hot-air drying. The organic acid contents of both cultivars were higher in sun- and hot-air-dried ones than freeze- and indoor-dried ones. Copsaicinoid contents of both cultivars decreased up to 22% by excessive hot-air drying compared to normal hot-air drying. Sugar contents were lower in all drying methods other than freeze drying for both cultivars.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.588-594
• /
• 2001

The aim of this paper is to develop the low temperature vacuum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation Usally operations just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressure as low 50 mmHg abs. The lowers the boiling point to $39^{\circ}C$ The experimental data of quantitative analysis for using practically were obtained by the constant drying rate period and reducing drying rate period according to the temperature of hot water which is the experimental parameters of present experiment. As the results, it took about 20 hours for material to reach about 18% of the final moisture content is order to store products for a long time about 450% of the early moisture content at the beginning of drying and maximum drying rate comes to about 0.30 kg/m2hr at about 350% of the moisture content.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.243-245
• /
• 2009

The single phase $Ba_2SiS_4$ doped with $Eu^{2+}$ was successfully synthesized by direct sulfurization of an oxide precursor prepared by a spray drying method using a novel water soluble silicon compound, which remains soluble in a given aqueous solution. The intensity of the emission peak of thus obtained $Ba_2SiS_4:Eu^{2+}$ was 1.75 times larger than that of a sample prepared by a solid state reaction method, and it approached 106% compared to one of the best commercially available YAG:$Ce^{3+}$ phosphor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.563-563
• /
• 2012

We report a one-step fabrication of single-crystal organic nanowire arrays on substrates using a new direct printing method (liquid-bridge-mediated nanotransfer moulding, LB-nTM), which can simultaneously enable the synthesis, alignment and patterning of the nanowires using molecular ink solutions. Two- or three-dimensional complex structures of various single-crystal organic nanowires were directly fabricated over a large area with a successive process. The position of the nanowires can be aligned easily on complex structures because the mold is movable on substrates before drying the polar liquid layer, which acts as an adhesive lubricant. This efficient manufacturing method can produce a wide range of optoelectronic devices and integrated circuits with single-crystal organic nanowires.

• 유기물자원화
• /
• 제31권4호
• /
• pp.5-11
• /
• 2023

본 연구는 하수 탈수찌꺼기가 건조기에 직 투입되는 경우 함수율 40~60% 구간에서 발생하는 Glue Zone에서 뭉침 및 Fouling 현상 등의 문제점 및 에너지효율 개선을 하기 위해 수행하였다. 열풍 온도는 270~300℃로 낮게, 패들타입의 부상방식과 순환되어진 축열 메디아에 탈수찌꺼기가 도포되어 열풍과의 접촉면적을 증대시켜 에너지 회수 및 가스 배출량을 감소시켰으며, 건조 찌꺼기의 함수율은 2.7~7.5%, 수분 증발열량은 608.0~690.6kcal/kg·H₂O로 축열 메디아 미투입 시 수분 증발열량 714.5 kcal/kg·H₂O과 비교하여 약 8.8%의 에너지 절감 효과를 확인하였다.

• 한국환경보건학회지
• /
• 제35권1호
• /
• pp.36-44
• /
• 2009

Hand-washing has been recognized as a critical factor in controlling infection and cross-contamination. This study was performed to investigate hygienic behavior of male university students focusing on awareness of hand-washing, their hand washing practices, and the difference between their awareness and practices. Both a self-administered questionnaire survey and a separate direct observation in restrooms were carried out at a university campus over a four week period. In the survey, 93.6% of the responded students claimed to wash their hands after using toilet. However, just 16.9% of the observed students actually did so, according to a separate and unnoticed observational study. Among the observed students who washed their hands, 25.0% of them used soap, only 5.0% of them washed four parts of their hands, and 15.0% of them washed their hands for more than 10 seconds. Paper towel was the most common hand drying method in the direct observation and also in the survey. Significant differences between the questionnaire survey and the direct observation (p<0.0l) were found in hand-washing practices, duration of hand-washing, using soap, washing parts of the hand, and hand-drying method after using the toilet. This study indicates that there is a remarkable difference between the male university students' awareness of hand-washing and their hand-washing practices. This study reveals that there is the need for programs or campaigns to increase hand-washing practices of male university students.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1358-1360
• /
• 1997

In this paper, the performance of Pt/$WO_3$ and Pt-$WO_3$ electrodes was studied for the direct methanol fuel cell. The characteristics of Pt/$WO_3$ electrode which was prepared by using electrodeposition method was tested with half-cell experiment. The characteristics of Pt-$WO_3$/C electrode which was Prepared by using freeze-drying method was tested with a single cell experiment. The performance of DMFC single cell which was prepared by Pt-$WO_3/C$ and Pt/C showed a current density of $32mA/cm^2$ at $110^{\circ}C$ & 0.3V(0.5mg Pt/$cm^2$).