• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1358-1360
• /
• 1997

In this paper, the performance of Pt/$WO_3$ and Pt-$WO_3$ electrodes was studied for the direct methanol fuel cell. The characteristics of Pt/$WO_3$ electrode which was prepared by using electrodeposition method was tested with half-cell experiment. The characteristics of Pt-$WO_3$/C electrode which was Prepared by using freeze-drying method was tested with a single cell experiment. The performance of DMFC single cell which was prepared by Pt-$WO_3/C$ and Pt/C showed a current density of $32mA/cm^2$ at $110^{\circ}C$ & 0.3V(0.5mg Pt/$cm^2$).

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.467-480
• /
• 2014

This study was focused on measurement methods for stone cultural heritages by analyzing Ultrasonic (P-wave) velocity variations according to the water content and anisotropy of rocks. As a result of analyzing of rock properties, the water content and saturation degree were rapidly changed at the beginning of drying and then showed exponential curve which their rates of change gradually decreased. However, P-wave velocity and its rate of change maintained constant values after natural drying of 10 hours. Therefore, the ultrasonic measurement for stone cultural heritages should be performed after natural drying of 10 hours considering the weather and moisture conditions. In addition, the highest values of anisotropy coefficient exhibited in granite and limestone, and indirect method was insensitive to anisotropy compared to direct method. However, all rocks remained anisotropy by indirect method. Accordingly, ultrasonic measurement considering various directions is required. The research results will contribute to customized non-destructive testing and precise diagnosis for lithological characteristics of stone cultural heritage.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.694-699
• /
• 2008

Considering the severe regulation associated with sludge treatment such as direct landfill and ocean dumping, there is no doubt in that an advanced study for the proper treatment of sludge is urgently needed in near feature. As one of viable method for sludge treatment, fry-drying of sludge by waste oil has been investigated in this study. The fundamental mechanism of this drying method lies in the phenomenon of rapid moisture escape in the sludge pore toward oil media. This is caused by the severe pressure gradient formed by the rapid oil heating between sludge and oil. As part of research effort of fry-drying using waste oil, a series of basic study has been made experimentally to obtain typical drying curves as function of important parameters such as drying temperature, drying time, oil type and geometrical shape of sludge formed. Based on this study, a number of useful conclusion can be drawn as following. The fry-drying method by oil immersion was found quite effective in the removal efficiency of sludge moisture, in general, the moisture content decreases significantly after 10 minutes and the whole moisture content was less than 5% after 14 minutes regardless of the drying temperature. The increase of oil temperature up to 140$^{\circ}C$ favors significantly for the removal of moisture but there was no visible difference above 140$^{\circ}C$. As expected, the decrease of diameter in sludge was efficient in drying due to the increased surface area per unit volume. Further, the effect of oil property by the change of oil type was noted. To be specific, for the case of engine oil the efficiency was found to be remarkably delayed in moisture evaporation compared with that of vegetable oil due to the increased viscosity of engine oil. It produced a result of increasing the evaporation of moisture largely relatively high in the drying temperature over 140$^{\circ}C$ compared with the drying temperature 120$^{\circ}C$ drying temperature as the drying time passed. Accordingly, the drying temperature is considered desirable as keeping over 140$^{\circ}C$ regardless of a sort of used oil.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.45-51
• /
• 2012

To see sunlight condition around in storage room, this study analyzers the scope both of sunlight and of the shade of sun into upper and lower window according to seasons. For this, this study investigates sun's seasonal changes, its effect of sunlight and notes antinomic conditions for ventilation and draft performance. In this, Architects of Jangkyunggak tride to block discoloration and fading due to ultraviolet rays and visible rays and block deterioration drying of the surface of Kyung-Pan due to infrared rays by oppressing sunlight flowing by means of narrowing the area of the upper window at front face that has a direct influence of Pan-Ga to avoid the exposure to direct sunlight.

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.128-135
• /
• 2009

Hand-washing is one of the most important factors in infection control and in preventing cross-contamination. The objective of this study was to investigate female university students' awareness of hand-washing, their hand washing practices, and the difference between their awareness and practices. A self-administered questionnaire survey and direct observation in restrooms were separately carried out in a university campus and over four weeks' period. A total of 97.4% of the survey respondents claimed to wash their hands after using toilet, and 98.2% of the observed students actually did so according to the unnoticed observational study. However, only 6.3% of the students who washed their hands in the direct observation washed for more than 10 seconds, although 46.4% of respondents in the survey reported that they usually wash their hands for more than 10 seconds. Among the observed students who washed their hands, only 0.9% used soap, and 0.9% washed four parts of their hands. Paper towel was the most common hand-drying method in the direct observation and also in the survey. Significant differences were found in duration, use of soap, part of washing, and hand-drying method between the questionnaire survey and the direct observation (p<0.05). This study indicates that there is a noticeable difference between the awareness of hand-washing and hand-washing practices among female university students. Further research should examine hand-washing practices of female university students in restrooms outside the university campus.

• Journal of Environmental Health Sciences
• /
• v.36 no.2
• /
• pp.95-107
• /
• 2010

Hand-washing is one of the major factors in personal hygiene and public health. This study was undertaken to investigate the hygienic behavior of food-service employees, focusing on awareness of hand washing, hand washing practices, and the load of index microorganisms (aerobic plate count, total and fecal coliforms, Escherichia coli, and Staphylococcus aureus) on the hands of food-service employees. A questionnaire survey completed by direct interview, direct observation of restrooms by the researcher and trained observers, and microbiological examination according to the Food Code of Korea were carried out. In the survey, a positive attitude toward hand washing compliance was reported; however, improper hand washing and poor hand hygiene of the food-service employees were seen under direct observation. Significant differences (p<0.05) were found between the questionnaire survey and the direct observations in hand washing compliance after using the toilet, duration of hand washing, use of hand washing agents, use of hand washing tools, washing of different parts of the hands, hand-drying method, temperature of water, and method of turning off the water. Samples taken from employees' hands before washing showed higher levels of bacteria than those taken during work and/or after washing (p<0.05). Poor hand washing practices were indicated by the positive results for total and fecal coliforms, E. coli, and S. aureus on the hands of some food-service employees. This study showed that there is a marked difference between the food-service employees' awareness of hand-washing and their actual hand-washing practices. The poor hand hygiene of and improper hand washing by the food-service employees should be addressed for improved food safety.

• Korean Journal of Food Science and Technology
• /
• v.10 no.3
• /
• pp.356-360
• /
• 1978

To determine the total saponin extracted by Shibata method, of Ginseng jellies and candies, $vanillin-H_2SO_4$ coloring method, direct drying method and thinchrographic method were compared after samples were treated with methanol to remove sugars. Thinchrographic method was the more reproducible than direct drying method and $vanillin-H_2SO_4$ coloring method was interfered significantly by sugars.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.119-128
• /
• 2023

This study was examined for investigating the quality changes of spring kimchi cabbage under various treatments (pre-drying/pre-cooling, packaging types, and stacking and loading in container and pallete in the storage room) during cold storage. The results showed that control (upward stacking without pre-drying/pre-cooling and HDPE or PVC film cover) was increased significantly in weight loss and trimming loss, compared to other treatments such as DPDH (downard stacking + pre-drying + HDPE), DPDP (downard stacking + pre-drying + PVC), DPCH (downnard stacking + pre-cooling + HDPE), and UPCH (upward stacking + pre-cooling +HDPE) during storage for three months. In Sensory evaluation, judging from marketable properties, the desirable appearance of spring kimchi cabbage with the modified pallet-unit MA packed, PE, and PVC film wrapping could be maintained until 9 weeks after pre-drying/pre-cooling. Meanwhile, the control without any treatments after 6 weeks, the sensory score was declined, significantly. In general, the low temperature (10℃ and 2℃) of pre-treatment with combination of plastic film packaging in spring kimchi cabbage storage could inhibit the physiological activity and reduce the direct exposure of environmental cold air in the storage. Therefore, these two variables were the key points for extending the shelf-life of spring kimchi cabbage.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Korean Journal of Pharmacognosy
• /
• v.41 no.1
• /
• pp.62-66
• /
• 2010

In result of analysis for the content determination of ursolic acid(UA) and oleanolic acid(OA) in extract of Eriobotryae folium using HPLC with UV detector, UA in chloroform extract of Moo-mok variety was showed highest content(2.7843 mg/g). And OA in ethyl acetate extract of Dae-bang variety was showed highest content(0.5898 mg/g). These result suggest that direct extraction using organic solvent(chloroform or ethyl acetate) was useful method for rapid quantitative analysis of UA and OA without preprocessing such as drying or fractionation.