• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.25-31
• /
• 1995

In this paper, a direct drive scalar robot manipulator is constructed and its mechanical machanism for operation is explained. Also, a motion controller board for the direct drive robot manipulator was developed where the IBM 486 computer is the main controller. For the developed direct drive robot, a force/motion control algorithm based on an active compliance scheme is developed. A preliminary experiment using the developed direct drive for a peg-in-hole job was done by implementing the control algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.520-522
• /
• 1996

The Direct Drive Arm(DDA) is a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF) using the direct drive motor of the NSK company. A controller system for the SCARA robot of DDA is designed using a DSP (TMS32Oc3O), which has the highest performance among the third DSP chips in the TI company. The design objective of the system is to implement dynamic control algorithms and neural control algorithms for real time learning which require a lot of calculations and large memory and have been tested only by simulations so far. The controller uses a DSP, a high speed D/A, 32-bit Counter and a large DRAM to implement advanced robot control algorithms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.1004-1011
• /
• 1996

This paper covers the technology developmental stage work for the automatic ammunition loading system mainly focusing on the controller design of the electro-hydranlic type direct drive multi-axis manipulator. Mathematical model of the plant derived and PIDM servo-controller structured. Comparative study between the analytical and experimental work has been carried out to help understand the response property of the direct dine multi-axis robot. In the direct drive robot, non-negligible amount of disturbance and load Induced dynamics variation are transmitted to the drive axis and nonlinearity is highly observed. Thereupon a robust controller Implementing time-delay control law is proposed, and computer simulation confirms the possibility for the time-delay control application against the unpredictable disturbance and load-Induced dynamics variation.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.813-816
• /
• 1991

Direct-drive SCARA-type industrial robots are increasingly used in the assembly process of small mechanical parts as well as electronic components, which uses direct-drive (DD) motors instead of reduction gear-type conventional motors for the actuators of manipulator arms. There are many advantages in using DD motors for robots, such as no backlash, low friction, high mechanical stiffness capability for fast and precise arm control, and high repeatability of positioning. However, there exist a number of difficulties which must be overcome to ensure proper construction and operation; increasing effects of load veriation and nonlinear and coupling dynamics, severe vibration caused by resonance of the manipulator components and low mechanical damping, etc. In order to handle these difficulties, lots of efforts have been made such as reduction of the arm inertia and elimination of the resonance, Performance evaluation of a recently developed, domestic DD robot shows that it works excellently compared with conventional robots. It, however, requires proved reliability and price competitiveness against its foreign counterparts.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.123-129
• /
• 1996

Computed torque method has been used for precise trajectory control of the robotic system that involves nonlinear dynamics. It is hard to know exact values of robot system parameters, and the robot arm receives umpredictable interference from the working environment. These disturbances, especially in a direct drive robot, are directly transmitted to actuating motor without reduction. Modelling error and distrubance can cause significant errors in a trajectory tracking problem. In this paper, we propose a new controller that $H_{\infty}$controller is conbined to robot system linearized by computed torque. Simula- tions are made for comparing the performance of the proposed controller with that of a nonlinear $H_{\infty}$ controller proposed by Chen and also computed torque method.hod.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.140-146
• /
• 1995

In case the uncertainty existing in a system is assumed to satisfy the matching condition and to be come-bounded. Y. H. Chen proposed an adaptive robust control algorithm which introduced adaptive sheme for a design parameter into robust deterministic controls. In this paper, the adaptive robust control algorithm is applied to the position tracking control of direct drive robots, and simulation and experimental studies are conducted to evaluate control performance.

• International Journal of Safety
• /
• v.1 no.1
• /
• pp.1-6
• /
• 2002

It is important to control the high accurate position and force to prevent unexpected accidents by a robot manipulator. Direct-drive robots are suitable to the position and force control with high accuracy, but it is difficult to design a controller because of the system's nonlinearity and link-interactions. This paper is concerned with the study of the stabilization force control of direct-drive robots. The proposed algorithm is consists of the feedback controllers and the neural networks. After the completion of learning, the outputs of feedback controllers are nearly equal to zero, and the neural networks play an important role in the control system. Therefore, the optimum adjustment of control parameters is unnecessary. In other words, the proposed algorithm does not need any knowledge of the controlled system in advance. The effectiveness of the proposed algorithm is demonstrated by the experiment on the force control of a parallelogram link-type robot.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.369-372
• /
• 1993

In this thesis, we consider an iterative learning controller to control the continuous trajectory of 2 links direct drive robot manipulator and process computer simulation and real-time experiment. To improve control performance, we adapt an iterative learning control algorithm, drive a sufficient condition for convergence from which is drived extended conventional control algorithm and get better performance by extended learning control algorithm than that by conventional algorithm from simulation results. Also, experimental results show that better performance is taken by extended learning algorithm.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1222-1224
• /
• 1996

The Hong Ik Direct Drive Arm(HIDDA) is a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF) using the direct drive motor of the NSK company. The direct NSK motors are used to give a large torque directly to the link, to reduce the modeling errors from the gears and chains. But, since the nonlinear coupling torques are transferred to the motor shaft without any reduction, we must consider a dynamic control algorithm. In this paper, we designed a robot controller for the HIDDA using a TMS320C31, which has the highest performance among the third DSP chips in the TI company. And we developed the integrated environment software of the robot management system to give the users an easy way of programming, running and simulation of the robot on the PC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.404-413
• /
• 1997

Direct-drive robots are suitable to position and force control with high accuracy, but it is difficult to design a controller which gives satisfactory perfonnance because of the system's nonlinearity and link-interactions. This paper is concerned with the force control of direct-drive robots. The pro¬posed algorithm consists of feedback controllers and a neural network. Mter the completion of learning, the outputs of feedback controllers are nearly equal to zero, and the neural network con¬troller plays an important role in the control system. Therefore, the optimum adjustment of parameters of feedback controllers is unnecessary. In other words, the proposed algorithm does not need any knowledge of the controlled system in advance. The effectiveness of the proposed algo¬rithm is demonstrated by the experiment on the force control of a parallelogram link-type direct¬drive robot.