• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.657-664
• /
• 2011

This study proposes an inverse method for estimating the boundary temperature in a gas-filled, onedimensional parallel domain enclosed by parallel plates. The distance between the plates is considered submicron to one mm. In the current method, it is assumed that the conditions of both heat flux and temperature are simultaneously applicable to one boundary, while no conditions are applicable to the other boundary The temperature on one of the boundaries should be inversely determined from the known temperature and heat flux on the other boundary. This study proposes a procedure for estimating the unknown boundary temperature through Monte Carlo simulation. Both the forward and inverse problems employ the Monte Carlo approach. The forward (direct) problem is solved by using the direct simulation Monte Carlo while the inverse solution is obtained by the simulated annealing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.314-318
• /
• 2000

For one-dimensional structures, a vibration response consists of direct and reflected waves from boundaries. Based on this concept of separable wave components, a modified travelling wave method (MTWM) is proposed in this paper: while all allowable waves are assumed and the boundary conditions are applied on by the conventional travealling wave method (TWM), in the proposed MTWM direct and reflected waves are assumed within the beam element, and the governing relations between direct and reflected waves are described in terms of the reflection or transmission coefficients. It is shown that the vibration response with considerable accuracy can be obtained compared to TWM for single and coupled beams. It is also shown that the band analysis to obtain quadratic response, or power flow response can be carried out by a slight change of the governing equations for one-dimensional structural systems. It is thought that the suggested MTWM can be used as a unified approach for predicting linear spectral response and/or quadratic band response involved in the one-dimensional structural vibration.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1363-1371
• /
• 2017

In this paper, an improved Direct Power Control (DPC) algorithm is presented for grid connected three phase PWM rectifiers. The new DPC approach is based on two main tasks. First the optimization of the look-up table, which is well-known in conventional DPC, is outlined for selecting the optimum converter output voltage vectors. Secondly a very simple and effective method is used to directly calculate their duty cycles from the power errors. Therefore, the measured active and reactive powers are made to track their references using hysteresis controllers. Then two vectors are selected and applied during one control cycle to minimize both the active and reactive power ripples. The main advantages of this method are that there is no need of linear current controllers, coordinates transformations or modulators. In addition, the control strategy is able to operate at constant switching frequencies to ease the design of the power converter and the AC harmonic filter. The control exhibits a good steady state performance and improves the dynamic response without any overshoot in the line current. Theoretical principles of the proposed method are discussed. Both simulation and experimental results are presented to verify the performance and effectiveness of this control scheme.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.700-707
• /
• 2008

As plan connecting island to island or island to land is needed, a lot of long-span bridge is being designed lately in Southern part of Korea. With development of pile equipment, overhanging large-scaled concrete pile are adopted to foundation type of main tower or pylon. About the number of 15~30 group piles per tower foundation is designed to resist long-spaning super-structure load, but by restricted condition of site investigation cost, a few boring-hole tests are performed to identify sub-ground layers. Up to now, direct-curved method connecting two or three known boring logs and representative interval method are usually used to evaluate unknown depth and rock properties at locations where piles are constructed. Because this approach is not logical and so rough, much difference occurs between designed length of piles and real length of it. In this paper, using a lot of various prediction method(reciprocal distance method, inverse square distance method and kriging method etc.), we suggest optimum length of group piles.

• Korean Journal of Weed Science
• /
• v.12 no.3
• /
• pp.230-260
• /
• 1992

The paper was reviewed the research results on weed dynamics and effective control methods in direct-seeded rice crop. Direct seeding method resulted in drastic increment of weed growth compared to transplanting method and also changed in troublesome weed flora. Two to three fold more weeds were harvested at the direct seeded rice and weed flora of dominant species shifted toward $C_4$type grass weeds. Some of the important troublesome weeds in direct seeded rice were Echinochloa crus-galle, Oryza saliva ssp spontanea, Leptochloa chinensis. Setaria viridus. Digitaria adsendens, Sesbania exaltata, Aeschynomene indica, Algae, etc. Yield loss due to weed competiton was about 40-60% for water-seeded and about 70-100% for dry-seeded rice while these for transplanted rice were about 25-35% for mechanical transplanting and about 10-20% for manual transplanting, respectively. Integrated weed management concept was neede to approach weed control effectively. Several cultural technologies were very effective to suppress the weed growth. These were tillage operation, water management, seeding date and seeding rate. Crop residues of barley, rice, wheat, oat and italian ryegrass were also effectivly suppressed the paddy weeds particularly to Potamogeton distiuctus, a perennial broadleaf weed. A pathogen of Epicoccosorus nematosporus identified from Eleocharis kuroguwai was an excellent potential bioagent to control the most troublesome perennial sedge weed of E. Kuroguwai without arising any detrimental effect. The herbicidal efficacy of this pathogen was as high as bentazon herbicide. Plant growth regulator of paclobutrazol (pp-333) was another possible alternative to reduce the herbicide use. In current, herbicide exhibited the most conspicuous results to control weeds in direct-seeded rice even though the application technologies were not fully established. Recommendations for herbicide application were suggested for in both water-and dry-seeded rice in USA, Japan and Korea, respectively. To make better and comprehensive recommendations further studies on weed ecology and herbicide development were emphasized.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.77-82
• /
• 2010

An analytical method for robust design of the multi-loop proportional-integral (PI) controller is proposed for various types of multi-delay processes. On the basis of the direct synthesis and generalized IMC-PID approach, the analytical tuning rules of the multi-loop PI controller are firstly derived for achieving the desired closed-loop response, and the structured singular value synthesis is then utilized for the tradeoffs between the robust stability and performance by adjusting only one design parameter (i.e., the closed-loop time constant). To verify the superiority of the proposed method, the simulation studies have been conducted on a wide variety of multivariable processes. The multi-loop PI controller designed by the proposed method shows a fast, well-balanced and robust response with the minimum integral absolute error (IAE) in compared with other renowned methods.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.3
• /
• pp.171-177
• /
• 1993

The prominent malar region has been recognized a sign of youth and beauty in caucasian who generally have a dolichocephalic and long face. But in the orients, especially Koreans who generally have a mesocephalic or brachycephalic face, it is considered an agressive, unesthetic facial appearance. So many patients require the shaving of prominent malar eminence and arch, and many methods of its reduction have been devised. For the exposure of malar complex, infraorbital skin incision, intraoral approach, preauricular approach, supraauricular scalp incision, and coronal approach have been used. And for the reduction of bony structure, direct shaving, contouring and repositioning of the malar complex after extirpation, and medially fracture of zygomatic arch have been used with its own merits. We performed the reduction malarplasty through intraoral approach. After two parallel oeteotomy at medial part of the zygomatic bone, the midsegment is removed. The posterior arch of zygoma was bended or green stick fractured. When more correction was required, the posterior arch was fractured medially through the step incision at skin. This method has a some advantages. Compared with the method for extirpation of malar complex, the infection rate is diminished, the resorption is small because of no free bone graft. And cheek drooping is prevented. Compared with the method of coronal approach, the surgical trauma is minimal. Now we report some cases of reduction malarplasty performed through intraoral approach and disscus the surgical technique and results.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1812-1819
• /
• 2003

This paper presents the effect of injection pressure on the atomization characteristics of high-pressure injector in a direct injection gasoline engine both experimentally and numerically. The atomization characteristics such as mean droplet size, mean velocity, and velocity distribution were measured by phase Doppler particle analyzer. The spray development, spray penetration, and global spray structure were visualized using a laser sheet method. In order to investigate the atomization process in more detail, the calculations with the LISA-DDB hybrid model were performed. The results provide the effect of injection pressure on the macroscopic and microscopic behaviors such as spray development, spray penetration, mean droplet size, and mean velocity distribution. It is revealed that the accuracy of prediction is promoted by using the LISA-DDB hybrid breakup model, comparing to the original LISA model or TAB model alone. And the characteristics of the primary and secondary breakups have been investigated by numerical approach.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.2
• /
• pp.121-128
• /
• 2004

This paper presents a new approach for determining an accurate incentive levels of Direct Load Control (DLC) program using sequential Monte Carlo Simulation (MCS) techniques. The economic analysis of DLC resources needs to identify the hourly-by-hourly expected energy-not-served resulting from the random outage characteristics of generators as well as to reflect the availability and duration of DLC resources, which results the computational explosion. Therefore, the conventional methods are based on the scenario approaches to reduce the computation time as well as to avoid the complexity of economic studies. In this paper, we have developed a new technique based on the sequential MCS to evaluate the required expected load control amount in each hour and to decide the incentive level satisfying the economic constraints. In addition, the mathematical formulation for DLC programs' economic evaluations are developed. To show the efficiency and effectiveness of the suggested method, the numerical studies have been performed for the modified IEEE reliability test system.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.636-638
• /
• 2003

This paper presents a new approach which is able to determine the reasonable incentive levels of direct load control using sequential Monte Carlo simulation techniques. The economic analysis needs to determine the reasonable incentive level. However, the conventional methods have been based on the scenario methods because they had not considered all cases of the direct load control situations. To overcome there problems, this paper proposes a new technique using sequential Monte Carlo simulation. The Monte Carlo method is a simple and flexible tool to consider large scale systems and complex models for the components of the system. To show its effectiveness, numerical studies were performed to indicate the possible applications of the proposed technique.