• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.566-574
• /
• 2013

In this paper, direct power control system for three-phase PFC AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the reduced-order virtual flux observer using the actual currents and the command control voltage. Moreover, source voltage sensors are replaced by a estimated flux. DC output voltage has been compensated by DC output ripple voltage estimation algorithm. The active and reactive powers estimation are performed based on the estimated flux and Phase angle. The proposed algorithm is verified through simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.513-514
• /
• 2016

본 논문에서는 스위칭 셀 구조의 직접형 PWM ac-ac 컨버터를 이용한 새로운 단상 무효전력 보상 장치를 제안한다. 제안한 보상기는 최근에 개발된 가변 임피던스 개념을 이용한 무효전력 보상기에서 발전된 형태이다. 기존 보상기에는 시스템 신뢰성에 심각한 악영향을 주는 커뮤테이션 문제가 존재하는데 제안한 보상기에서는 스위칭셀 구조와 결합인덕터로 구성된 ac-ac 컨버터를 사용하여서 커뮤테이션 문제를 해결하였다. 이로인해 기존 시스템에 비해 스위칭 신호 구현이 매우 간편하고 RC 스너버가 필요하지 않으며 결과적으로 매우 신뢰성이 높은 시스템을 구현할 수 있다. 간략화 된 단상시스템을 구축하여 실험을 통해 성능을 검증하였다.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1288-1296
• /
• 2015

The ac side current of a line commutated converter(LCC) high voltage direct current (HVDC) is characterized by highly non-sinusoidal waveform. If the harmonic current is allowed to flow in the connected ac network, it may cause unacceptable levels of distortion. Therefore, ac side filters are required as part of the total HVDC converter station, in order to reduce the harmonic distortion of the ac side current and voltage to acceptably low levels. The ac filters are also employed to compensate the requested reactive power because LCC HVDC also consume substantial reactive power. Among different types of filters, triple-tuned filters have been widely utilized for HVDC system. This paper presents two design methods of triple-tuned filter; equivalent method and parametric method. Using a parametric method, in particular this paper proposes a design algorithm for a triple tuned filter. Finally, the performance of the design algorithm is evaluated for a 250kV HVDC system in Jeju island. The results cleary demonstrate the effectiveness of proposed design method in harmonics reduction.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1232-1241
• /
• 2012

The ac side current of an high voltage direct current (HVDC) converter is characterized by highly non-sinusoidal waveform. If the harmonic current is allowed to flow in the connected ac system, it may cause unacceptable levels of distortion. Therefore, ac side filters are required as part of the total HVDC converter station, in order to reduce the harmonic distortion of the ac side current and voltage to acceptably low levels. The ac side filters are also employed to compensate network requested reactive power because HVDC converters also consume substantial reactive power. Among different types of filters, double-tuned filters have been widely utilized for HVDC system. This paper presents two design methods of double-tuned filter; equivalent method and parametric method. Using a parametric method, in particular the paper proposes a new design algorithm for a realistic system. Finally, the performance of the design algorithm is evaluated for a 80kV HVDC system in Jeju island with PSCAD/EMTDC program. The results cleary demonstrate the effectiveness of proposed design method in harmonics elimination and steady-state stability.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.348-349
• /
• 2011

본 논문에서는 새로운 구조의 능동 클램프 ac-dc 컨버터를 제안한다. 제안된 컨버터는 강압형 ac 쵸퍼와 voltage doubler로 구성되며, 직접전력변환을 함으로써 간단한 구조와 고효율을 가진다. 강압형 ac 쵸퍼는 ac-ac 전력변환과 능동 클램프역할을 하며, 스위치의 전압 스트레스와 스위칭 손실을 최소화 한다. 또한, voltage doubler의 공진 커패시터와 변압기의 누설 인덕턴스는 공진회로를 형성하여 출력 다이오드의 역회복 문제를 해결한다. 본 논문에서는 제안된 회로의 이론적 해석을 실험을 통해 검증한다.

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.111-119
• /
• 2022

This paper is about power transfer between heterogeneous systems in zero-energy buildings. Currently, electricity used in buildings, from renewable energy generation power in buildings, consists of alternating current networks. In order to use electricity, alternating current must be converted to direct current, which typically results in a loss of 10%. In order to solve this problem, research is needed to reduce power loss as much as possible by implementing both a DC network and an AC network in a zero-energy building. Therefore, in this paper, an inter-link converter capable of bidirectional power transfer between DC and AC networks applied to zero-energy buildings is developed. The structure of the inter-link converter to be developed was proposed and its feasibility was verified through simulations and experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.373-375
• /
• 2005

AC harmonic filters connected to the terminals of HVDC schemes fulfill two primary functions: to compensate for part or all of the reactive power absorbed by the converter, and to limit to an acceptable level the voltage distortion caused by the converter harmonics. this paper makes a direct comparison between tuned filters and damped filters, each designed for a long HVDC transmission scheme. It Is hoped that by comparing the two approaches a syudy to determine the suitability of filter types to AC systems can be promoted.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.111-112
• /
• 2015

MMC HVDC(Multi-level Modular Converter High Voltage Direct Current)는 현재 차세대 전력망으로써 각광을 받고 있고 그에 대한 연구가 활발하게 진행 중이다. 본 논문에서는 모듈형 멀티레벨 컨버터를 이용한 전압형 HVDC 시스템의 AC 전류제어기에 대하여 기술하고자 한다. 일반적으로 사용되는 회전변환을 통한 DQ전류제어와 PR제어를 사용하여 응답특성을 PSCAD/EMTDC를 통하여 비교 검증하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.387-388
• /
• 2014

3상 AC/AC 2단계 직접형 전력변환시스템(TSDPC)의 제어는 입력전류공간벡터와 출력전압공간벡터를 합성한 공간벡터 PWM 스위칭패턴을 통해 제어를 하며, 이를 기반으로 계산된 유효벡터인가시간에 따라 TSDPC를 구성하는 다수 스위칭소자가 절환 됨을 통해 많은 스위칭손실이 발생하는 문제점이 있다. 본 논문에서는 스위칭 시퀀스를 간략화하여 스위칭 절환횟수를 줄임과 동시에 부분 영전류 스위칭 제어기법을 도입하여, 스위칭손실 저감 제어기법을 제안한다.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.535-543
• /
• 2009

In this paper, pulse-width modulation (PWM) control strategy of various topologies of matrix converters is presented, which is based on direct duty ratio PWM (DDPWM). Because the DDPWM method has the characteristics of the inherent per-phase modular structure, it can be effectively applied to single-phase, two-phase and three-phase four-leg matrix converters as well as the common three-phase to three-phase matrix converter. Also, this paper treats command generation method in each matrix converter. The feasibility and validity of the proposed method are verified by experimental results.