• Economic and Environmental Geology
• /
• v.17 no.1
• /
• pp.49-55
• /
• 1984

This paper describes three-dimensional (3-D) standard curves for conductive dipping buried bodies in induced polarization (IP) method. Dipole-dipole IP responses for the dipping bodies are calculated by the numerical modeling technique using an integral equation solution. Dip angles of the bodies are 0, 20, 45, 70 and 90 degrees, respectively. The horizontal (0-degree dip) and vertical (90-degree dip) bodies produce symmetrical patterns of IP responses. The dipping bodies of 20, 45 and 70 degrees, however, produce asymmertical patterns, with the highest IP contours dipping in the direction opposite to the bodies in pseudo-sections. The most remarkable asymmetrical pattern appears in the model of 20-degree dip. It is difficult to distinguish the body of 70-degree dip from that of 90-degree dip on the basis of dipole-dipole IP data. The IP pattern in pseudo-sections varies when the line moves away from the center of the body along strike, with the anomaly deeper and smaller in amplitude. IP maps seem to be more useful than IP pseudo-sections in predicting the location of target.

• The Korean Journal of Pesticide Science
• /
• v.7 no.4
• /
• pp.296-301
• /
• 2003

This study was conducted to select low toxic insecticides against natural enemies, and to evaluate resistance stability and cross-resistance to resistance strain for the fulfillment of integrated pest management development. Toxicity of imidacloprid and spinosad to Amblyseius cucumeris was relatively low regardless of the adopting test methods. In addition, those to the Amblyseius fallacis was also low by slide dipping method. The slide dipping method was useful to eliminate repellency effect by mites to the tested insecticides. Mortality of A. fallacis to deltamethrin recorded in 1994 and 1999 was 21.6% and 7.4%, respectively. Meanwhile, the permethrin-resistanct strain of A. fallacis was maintained its resistance to deltamethrin. However, the cross-resistance to the newly introduced insecticides namely imidacloprid, fipronil, chlorfenapyr, abamectin, and spinosad. was relatively low.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.354-359
• /
• 2006

Recently, the interest in lithography without photo exposure has been increased compare to the conventional photolithography in nano meter and micrometer size patterning area. We studied a self aligned dipping of Ag solution through micro contact printing (${\mu}-CP$) with octadecyltrichlorosilane (OTS) treated polydimethylsiloxane (PDMS) soft mold. The OTS monolayer on the patterned PDMS was formed by dipping it into OTS solution. We transferred the OTS monolayer from PDMS mold to the glass. The OTS monolayer changed the surface energy from hydrophilic surface to hydrophobic surface, And then we made self aligned Ag solution patterns just after dipping the substrate, using adhesion difference of Ag solution between OTS treated hydrophobic area and non-OTS treated hydrophilic area. We finally get the Ag patterns through only dip-coating after the ${\mu}-CP$ process. And we observed surface energies on the glass substrate through the contact angle measurements as time goes on.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.4
• /
• pp.109-117
• /
• 2016

Purpose : This study was designed to provide basic data of effective sanitization method of sprout vegetable for microbiological safety. Methods : Sanitization treatments were performed by dipping the sprout into chlorine and vinegar water. Microbial analysis were composed of the total plate count(TPC) and coliform group count(CGC). Result : Among chlorine water sanitization, the microbial reduction was largest in 100ppm chlorine water, and its TPC and coliform group count decreased to 6.01 log CFU/g and 5.06 log CFU/g. The effective dipping time in 100ppm chlorine water treatment was 5.97 log CFU/g and 5.91 log CFU/g for 30min and 60min, in which TPC were below the microbiological safety limits of 6.00 log CFU/g. Coliform group counts were decreased to 5.44, 5.46, 5.42 log CFU/g in the dipping the spouts for 30min, 60min and 90min. As a result of sanitizing alfalfa spout by vinegar water, a microbial counts tended to decrease with increasing concentration and the dipping time. The effective concentration of vinegar water was 2% for TPC(6.00 log CFU/g) and 1% for coliform group count(5.20 log CFU/g). With 1% vinegar water treatment, TPC became below the microbiological safety limits in all samples and in particular, the sample treated for 60min and 90min(4.93, 4.54 log CFU/g). While coliform group counts were decreased to 3.91 log CFU/g in the dipping the sprouts for 90min, those were still beyond the permitted limit. Conclusion : To secure the food safety of food service facilities including kindergarten feeding, it is considered that along with the systematic study of effective disinfection method for microbiological control at the preconditioning level of spout vegetable within the range of secured maleficence to human body, and the study regarding the measures to lower the initial microbiological pollution of spout vegetable.

• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.177-183
• /
• 2008

For the development of integrated pest management system by harmonizing biological and chemical control, some experiments were carried out to select low toxic pesticides against natural enemies. Leaf dipping method, body dipping method, and diet treatment method were used for the toxicity evaluation against Microplites mediator adults. We tested 49 different pesticides (34 insecticides, 11 fungicides, 4 herbicides) at recommending concentration commonly used to control insect pests, disease and up-land weeds in chinese cabbage field. 16 insecticides, 11 fungicides, and 4 herbicides were shown to be low toxic to Microplites mediator adults in the treatment of body dipping.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.75-80
• /
• 1987

In order to prevent browning during drying of garlic flakes, the effect of dipping in phosphate complex solution prior to drying on the development of brown pigment in the flakes were studied. The browning color development during drying of the flakes was greatly dependent on phosphate complex concentration and their dipping time. A reciprocal relationship between browning color formation and reducing sugar content of dried garlic flakes was found. The browning color development during drying of the flakes was effectively impeded by dipping in 0.3% phosphate complex solution for 3 minute. The reduction of pyruvate content during drying of the flakes was greatly influenced by phosphate complex concentration and drying temperature, and a maximum retention was acieved by 3 minute dipping in 0.2-0.3% phosphate complex solution. The dried yield of the flakes dipped in phosphate complex solution was 1.62-1.75% lower than control and it was mainly caused by the dissolution of soluble solids during dipping.

• Journal of fish pathology
• /
• v.21 no.2
• /
• pp.107-117
• /
• 2008

The pharmacokinetic properties of oxytetracycline (OTC) were studied after dipping and oral administration to cultured olive flounder, Paralichthys olivaceus (600 g). Plasma concentrations of OTC were determined after oral dosage (50, 100 and 200 mg/kg body weight) and dipping (50, 100 and 200 ppm, 1 h) in olive flounder (average 600 g, 23±1℃). Plasma samples were taken at 3, 5, 10, 15, 24, 32, 48, 72, 120, 168 and 240 h post-dose. In oral dosage of 50, 100 and 200 mg/kg, the peak plasma concentrations of OTC, which attained at 3 h post-dose, were 0.34, 0.44 and 1.18 ㎍/㎖, respectively. In dipping of 50, 100 and 200 ppm, those of OTC which also observed at 5 h post-dose, were 0.43, 0.38 and 0.64 ㎍/㎖, respectively. Plasma concentrations of OTC were not measurable at 240 h post-dose in all experiments. The kinetic profile of absorption, distribution and elimination of OTC in plasma were analyzed fitting to a one-compartment model by WinNonlin program. The following parameters were calculated for a single dosage of 50, 100 and 200 mg/kg body weight, respectively: AUC (the area under the concentration-time curve)=31.40, 28.07 and 32.97 ㎍∙h/㎖; T1/2 (half-life)􀆫0.89, 1.12 and 0.43 h; Tmax (time for maximum concentration)= 5.25, 3.70 and 7.30 h, Cmax (maximum concentration)=0.25, 0.38 and 0.61 ㎕/㎖. Following dipping at 50, 100 and 200 ppm, these parameters were AUC􀆫15.51, 14.63 and 19.72 ㎍∙h/㎖; T1/2= 0.75, 0.41 and 0.74 h; Tmax=4.90, 7.08 and 4.68 h, Cmax=0.40, 0.32 and 0.46 ㎕/㎖.

• Geomechanics and Engineering
• /
• v.31 no.6
• /
• pp.557-571
• /
• 2022

Landslides are often triggered by weak interlayers initiated in tailings dam foundations, and hazards gradually occur. This is serious for landslides in high tailings dams due to their high potential energy. Tailing samples with a fine-grained interlayer at a set dip angle were prepared. Consolidated undrained (CU) triaxial shear tests were carried out by using a high-pressure triaxial apparatus. The results were compared with the results under a low confining pressure. Four reasons were summarized for high tailings dams more prone to instability than low dams. The shear strength of the samples with dipping interlayers decreases with increasing dip angle. An obvious straight drop in the stress path after the peak occurs in samples with dipping interlayers at an angle of 60°. The effect of the interlayer on the mechanical behaviour of tailings is very sensitive, especially for the sample with a dipping interlayer at an angle of 60°. Shear slipping along the interlayer should be given more attention in tailings dams. Compared with the results under low confining pressure, the stress decreases continuously for the samples with dipping interlayers at large angles under high confining pressure. The positive pore pressure, which reduces the effective stress, occurred in tailings samples under high confining pressure. The residual strength of tailings under high confining pressure is smaller than that under low confining pressure. These factors increase the dam break risk and the disaster impact for high tailings dams.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2483-2486
• /
• 2013

Background: The aim of this study was to determine the epidemiology of tobacco smoking, toombak dipping and alcohol consumption as risk factors for cancer in the adult population of the northern state of Sudan. Materials and Methods: A cross-sectional survey from March to April 2010, covering 963 adults, was performed. Result: Only 207 had responded, and the male female prevalence was 20.8% and 0.73%. Out of 207 respondents, 29.5% had smoked tobacco in their lifetime, 38% were toombak dippers, while 14% were consumers of alcoholic beverages. Conclusions: The prevalence of toombak dipping was higher than tobacco smoking among the adult population in the northern state of Sudan. Female participation in tobacco and alcohol related studies was found to suffer from major obstacles since these habits are considered as social stigma. Appreciation of the full impact of smoking on population health will definitely make a major contribution to improvement of the poor public health situation in Sudan.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.4
• /
• pp.278-285
• /
• 1996

The structure of coating layer formed by hot dip Al-Cu alloy coating on Monel 1400 metal was studied. The coating layer consists of alloyed layer adjacent to the Monel 400 substrate and Al-Cu alloy. It was found that the hardness of coating increased with dipping time and heat treatment associated with the diffusion and the formation of intermetallic compound at the interface. However the thickness of coating layer was decreased at high dipping temperature due to tile higher viscosity of liquid coating alloy. Diffusion heat treatment at $600^{\circ}C$ after coating resulted in the disappearence of adhered Al(Cu) and $CuAl_2$ phases, and then they transformed into the new phases of CuAl and Al7Cu4Ni at coating layer.