• 제목/요약/키워드: Dip Coating

검색결과 377건 처리시간 0.027초

유기전해질에 따른 EDLC의 전기화학적 특성 (Electrochemical Characteristics of EDLC with various Organic Electrolytes)

  • 양천모;이중기;조원일;조병원;임병오
    • 전기화학회지
    • /
    • 제4권3호
    • /
    • pp.113-117
    • /
    • 2001
  • 탄소계 전극을 사용하는 EDLC(Electric Double Layer Capacitor)용의 축전용량과 충방전속도는 전해질의 종류, 충방전 조건 그리고 탄소계 물질의 물리화학적 성질에 따라 크게 달라질 수 있다. 이에 본 연구에서는 dip coating method에 의해 제조된 EDLC용 활성탄소 전극에서 유기 전해질의 종류를 달리하여 충방전 실험과 전기화학적인 실험을 시행하였다. 또한 충전전류밀도와 방전전류밀도의 변화에 따른 비축전 용량의 변화를 조사하였고, 최적 유기전해질의 조건에서 leakage current 특성, 자가방전 특성 그리고 시간전압곡선을 기존의 $1M-Et_4NBF_4/PC$와 비교하였다 활성탄, 소전극으로 비표면적이 $2000m^2/g$인 MSP-20을 사용하고 유기전해질로는 $1M-LiPF_6/PC-DEC(1:1)$를 사용한 EDLC에서 130 F/g 정도의 우수한 비축전 용량을 나타내었고 저항면에서도 가장 낮은 수치를 나타내었다 $1M-LiPF_6/PCDEC(1:1)$를 사용한 EDLC는 15분동안 0.0004A의 낮은 leakage current와 100시간 경과 후 0.8V의 우수한 자가 방전 특성 그리고 IR-drop이 적은 선형의 시간-전압곡선을 보여주었다.

알루미나 중공사 한외여과막 제조 및 특성평가 (Fabrication and Characterization of Alumina Hollow Fiber Ultrafiltration Membrane)

  • 김여진;김성중;김정;조영훈;박호식;이평수;박유인;박호범;남승은
    • 멤브레인
    • /
    • 제28권1호
    • /
    • pp.21-30
    • /
    • 2018
  • 본 연구에서는 sol-gel법을 이용하여 균일하고 결함을 최소화한 세라믹 한외여과막을 제조하였다. 알루미나 중공사 정밀여과막 지지체의 기공 크기를 줄이기 위해, 합성된 boehmite sol과 sol-ethanol 혼합 용액을 사용하여 dip coating법으로 지지체 표면 위에 ${\gamma}$-알루미나 활성층을 형성시켰다. pristine sol을 이용하여 4회 이상 코팅했을 경우 박막층의 두께가 상당히 증가하여 균열 및 박리현상을 야기시키고, 3회 코팅을 진행하였을 경우 표면 결함이 최소화된 최적의 시료를 얻을 수 있었다. 또한, 소결 온도가 ${\gamma}$-알루미나 활성층의 기공 크기에 미치는 영향을 분석하였다. 소결 온도가 $1000^{\circ}C$일 때 가장 높은 순수 투과도 값을 보였으며, 10 nm 크기의 dextran 분획분자량(molecular weight cut-off (MWCO) : 51 kDa)이 관찰되었다. 600, $800^{\circ}C$에서 소결한 막의 경우, 12 kDa MWCO (dextran 5 nm)를 갖는 것으로 확인되었다. 결과적으로, 코팅 용액의 조성은 박막층의 두께에 큰 영향을 주었고, 소결 온도에 따라 분획분자량이 크게 영향을 받는 것을 알 수 있었다.

SiO2\TiO2 박막에 의한 투명 발수 반사방지 코팅 (Transparent Hydrophobic Anti-Reflection Coating with SiO2\TiO2 Thin Layers)

  • 노영아;김기출
    • 한국산학기술학회논문지
    • /
    • 제18권3호
    • /
    • pp.1-6
    • /
    • 2017
  • 태양전지의 셀을 보호하기 위한 커버 글라스에는 반사방지 코팅 및 셀프클리닝과 같은 기능성 코팅이 적용되어왔다. 일반적으로 메조포러스 실리카를 이용한 반사방지 코팅은 빛의 투과를 증가시키며, $TiO_2$ 광촉매 필름은 셀프클리닝 코팅에 적용되어왔다. 본 연구에서는 $SiO_2/TiO_2$ 박막 코팅에 의한 투명 발수 반사방지 및 셀프클리닝 코팅을 sol-gel 공정과 dip-coating 공정으로 글라스 기판 위에 제조하였다. 기능성 코팅의 표면형상은 전계방출 주사전자현미경과 원자힘 현미경으로 분석하였고, 광학적 특성은 UV-visible 분광광도계로 분석하였다. 필름의 발수특성은 접촉각 측정으로 확인하였다. 그 결과 $TiO_2$ 필름은 기판인 슬라이드 글라스와 비슷한 수준의 높은 광 투과율을 나타내었다. 일반적으로 $TiO_2$ 나노입자는 필름에서 반사를 증가시키며, 결과적으로 투과율의 저하를 가져온다. 하지만 본 연구의 $SiO_2/TiO_2$ 박막으로 이루어진 기능성 코팅은 $110^{\circ}$의 접촉각을 나타내었으며, 파장 550 nm에서 기판인 슬라이드 글라스의 투과율보다 2.0% 증가한 93.5%의 광 투과율 특성을 나타내었다.

Alumina Sol의 제조 시 사용되는 해교제 종류가 코팅 도막의 물성에 미치는 영향 (Effect of Types of Peptizing Agents Used for Preparation of Alumina Sols on the Properties of Coating Films)

  • 이병화;임형준;이인표;안치용
    • Korean Chemical Engineering Research
    • /
    • 제54권6호
    • /
    • pp.767-774
    • /
    • 2016
  • 졸-겔법에 의해 출발물질로 aluminum isopropoxide를 사용하여, 메탄올용매 내에서 가수분해 시킨 후 해교제인 초산, 질산 또는 염산을 각각 첨가하여 해교 시켜 3종류의 alumina sol을 제조하였다. 또한 이 sol에 실란커플링제인(3-glycidyloxypropyl) trimethoxysilane을 첨가하여 코팅 용액을 제조한 후, 이용액을 polycarbonate 기재 위에 담금 코팅 후 열 경화시켜 코팅 도막을 형성하였다. 이 과정 중 해교제의 종류 변화가 코팅 도막의 물성에 미치는 영향을 연구하였다. 그 결과 해교제로서 강산인 염산이나 질산을 사용한 코팅 도막은 H나 2H의 연필경도와 5B의 부착력을 나타내어 우수한 물성을 나타내었다. 반면에 해교제로서 약산인 초산을 사용한 경우에는 HB의 연필경도와 3B의 부착력을 보여 좋지 못한 물성을 나타내었다.

IF 고강도 합금화 용융아연도금강판의 표면품질에 미치는 합금원소의 영향 (Effect of Alloy Elements on Galvannealed Coating Quality in IF High Strength Steels)

  • 전선호;진광근;신광수;손호상;김대룡
    • 대한금속재료학회지
    • /
    • 제46권5호
    • /
    • pp.289-295
    • /
    • 2008
  • The effect of the alloy elements(Si/Mn) ratio on the coating quality including wettabilty with molten zinc, galvannealing kinetics and crater has been investigated in interstitial-free high strength steel(IFHSS) containing Si and Mn. When the Si/Mn ratio was below 0.75, IF-HSS exhibited a good wettability leading to a good galvannealed coating quality after annealing at $800^{\circ}C$ for 40s in $15%H_2-N_2$ mixed gas with dew point $-60^{\circ}C$. In contrast, the wettability and galvannealed coating quality were deteriorated in the Si/ Mn ratio above 0.75. It is shown that they have relevance to oxides forms by selective oxidation on the steel surface. The oxide particles dispersed on the steel surface with a surface coverage of below 40% resulted in good wettability and galvannealed coating quality. The oxide particle is mainly consisted of $Mn_2SiO_4$ with low contact angle in molten zinc. On the other hand, the continuous oxide layer on the steel surface, such as network- and film-type,caused to poor wettability and galvannealed coating quality. The coverage of oxide layer was above 80%, and its chemical species was $SiO_2$ with high contact angle in molten zinc. Consequently, the Si/Mn alloy ratio played an importance role in galvannealed coating quality of IF-HSS.

Low-Loss Multimode Waveguides Using Organic-Inorganic Hybrid Materials

  • Yoon, Keun-Byoung
    • Macromolecular Research
    • /
    • 제12권3호
    • /
    • pp.290-292
    • /
    • 2004
  • Multimode channel waveguides were fabricated using a direct UV patterning technology from thick films deposited by the one-step dip-coating of an organic/inorganic hybrid material (ORMOCER(equation omitted). The core size of the covered ridge waveguide was 43${\times}$51 $\mu\textrm{m}$$^2$; the waveguides can be readily prepared for multimode applications by direct UV patterning. The waveguides exhibited smooth surface profiles and a low optical loss of 0.07 ㏈/cm at the most important wavelength (850nm) used for optical interconnects.

졸겔법으로 제조된 Ag나노입자가 함유된 석영유리박막의 광학특성

  • 정채환;부성재;김복현;손동훈;주성민;한원택
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2006년도 하계학술발표회 논문집
    • /
    • pp.457-458
    • /
    • 2006
  • 졸겔공정을 이용하여 Ag나노입자가 형성된 석영유리계 유리박막을 제조하였다. Dip-coating 과 건조 및 소결처리를 거쳐 $60{\sim}275nm$ 두께의 박막을 제조하였고, TEM 분석 결과 $2{\sim}5nm$ 크기의 Ag나노 입자가 유리박막에 형성된 것을 확인하였다.

  • PDF

연속 용융아연도금 공정에서 Fe용출 및 드로스 발생에 미치는 도금조건의 영향 (Influence of Coating Conditions on Fe Dissolution and Dross Formation in Continuous Hot-dip Galvanizing Process)

  • 전선호;김상헌
    • 한국표면공학회지
    • /
    • 제36권5호
    • /
    • pp.364-372
    • /
    • 2003
  • In continuous galvanizing process, dissolution of iron into molten zinc results in a fairly great amount of dross. In order to decrease dross, the amount of dissolved iron of strip in molten zinc was investigated in the range of 0∼0.22%Al content, 440∼$470^{\circ}C$ strip temperature and 3∼60 sec dipping time. Uniform Fe-Al-Zn inhibition layer was formed in the coating layer/strip interface not only in the grain boundary but also in the grain of substrate with the increase of Al content in the zinc pot, while the amount of iron dissolution was decreased. Inhibition layer was unstable as the dipping time and strip temperature increased and the amount of iron dissolution increased.

FT-IR Study of Dopant-wool Interactions During PPy Deposition

  • Varesano Alessio;Aluigi Annalisa;Tonin Claudio;Ferrero Franco
    • Fibers and Polymers
    • /
    • 제7권2호
    • /
    • pp.105-111
    • /
    • 2006
  • Coating the fibre surface by in situ oxidative chemical polymerisation of polypyrrole (using $FeCl_3$ as oxidant) is a readily industrial applicable way to give electrical properties to wool with good ageing stability [1], although pre-treatments are required to avoid damage of the cuticle surface due to the acidic condition of the process. FT-IR and EDX analysis reveal that organic sulphonates and sulphates, used as dopants, are absorbed by wool, while chlorine ions are preferably embedded on the polypyrrole layer. The resulting electrical conductivity seems mainly due to the presence of chlorine as counter-ion of polypyrrole; nevertheless, the presence of arylsulphonate in the polymerisation bath increases the electrical conductivity of the coating layer.