• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.244-245
• /
• 2009

Sol-gel coatings of $TiO_2$ have been prepared from $TiO_2$ sol and deposited by dip-coating technique on 316L stainless steel sheets in order to study the electrochemical behaviorin corrosive solutions. The influence of the coatings on the chemical corrosion of the substrate has been evaluated by potentiodynamic polarization curves in different aqueous NaCl solution at $25^{\circ}C$.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.83-83
• /
• 2002

• Journal of Industrial Technology
• /
• v.1
• /
• pp.27-33
• /
• 1981

Due to intense tectonic activities and volcanic movements, coal mines exploration have been conflicted with problems so far. In this paper, computer calculation was specially applied for various model structures of inclined, anticlined and synclined coal beds. Of all these structures, the gradient of equipotential curves showed great as the dip of coal beds increases. Especially at synclined structure, the concaves appeared sharply in both sides of equipotential curves as the dip of coal beds increases. By above results, interpretation of coal exploration can be done by comparing field data one another.

• The Magazine of the IEIE
• /
• v.17 no.6
• /
• pp.48-52
• /
• 1990

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.257-263
• /
• 2011

The budgets of fresh water, salt and nutrients were estimated in order to clarify the characteristics of material cycle in the Gamak Bay in 2006 with Simple Box budget Model. Outflow volume of freshwater into system was approximately $-174.2{\sim}72.5{\times}10^3m^3/day$. Inflow masses of DIP and DIN were approximately 397.0~1158 mole/day and 1750~8328 mole/day, respectively. The Source or sink of DIP was under the control of the variation of fresh water budget in the system. the mass balance and NEM was largely determined by flushing time of material.

• Journal of the Korean earth science society
• /
• v.38 no.4
• /
• pp.263-268
• /
• 2017

The determination algorithm of the location of a line source with strike and dip using the gravity gradient tensor on a single profile is proposed. We already proposed the determination of strike and dip in the previous paper and then, now we improved the algorithm to locate a line source after determining strike and dip. The strike and dip of the line source can be determined by rotating the gravity gradient tensor matrix as reducing 2 independent components. Using the ratio of remaining 2 components, the location can be determined by the least square manner of the pointing vectors on each observation point. A synthetic model is tested for proving the usefulness of the proposed algorithm.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.227-231
• /
• 2003

제주항을 대상으로 오염부하의 정량적인 관리를 위하여 물질순환모델을 이용하여 해수유동특성과 COD, DIN 그리고 DIP의 농도분포를 시뮬레이션 하였고, 이 결과를 통해 해역의 수질개선대책으로 하천오염부하 감소와 저질개선을 통한 용출부하 감소에 따른 COD, DIN 그리고 DIP의 농도를 정량적으로 평가한 결과는 다음과 같다. 외부부하인 하천유입 부하량의 감소에 의한 제주항 내 오염물질 농도의 저감효과는 만 중앙부에서 만 외로 갈수록 그 영향범위가 미비하나 하천 유입부에 한정되어 큰 효과를 나타내고 있어 제주항 내로 오염부하의 유입을 방지함으로서 제주항의 하천 유입부 수질개선에 큰 영향을 줄 수 있다. 내부부하인 저질 영양염 용출부하를 감소했을 경우의 제주항 내 영영염 농도의 저감 효과는 하천유입 부하량의 저감시와 상대적으로 비교하여 제주항의 하천 유입부보다는 만 중앙부나 만 유입부의 수질개선에 효율적인 영향을 보이는 것으로 사료되며 특히, DIP의 경우 그 양상이 잘 나타났다. 하천과 저질의 총 부하량을 100% 감소했을 경우, COD의 농도분포는 하천유입부인 정점 St. 1에서 약 44%정도의 저감효과를 나타내어 하천유입 부하량만을 감소했을 때보다는 저감효과가 증가하였다. DIN의 경우는 하천유입부하와 저질 용출부하를 각각 따로 저감했을 경우에 비해 전체적으로 저감효율이 상승하고 있으며, 만 중앙부에서 만 유입부로 갈수록 그 경향이 잘 나타나고 있으며 총 부하를 저감시켰을 때 제주항내의 DIN 농도는 정점 St. 3 다음 지점부터 해역수질기준 II등급을 유지되는 수질개선 효과를 나타내었다. DIP의 경우는 DIN과 유사한 경향을 보였으며 정점 St. 4 이후로 해역수질기준 II등급 이하로 유지되는 수질개선 효과를 나타내었다. 이상의 결과로 볼 때, 현재 해역수질기준 III등급인 제주항 내에서 수질을 향상시키기 위해서는 하천유입부하량의 저감뿐만 아니라 항내 저질개선 등을 통하면 전체적으로 II등급 이하를 유지할 수 있을 것으로 예상된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.53-59
• /
• 2009

The purpose of this research is particle shape evaluation of granular soil and aggregate using Digital Image Process(DIP). DIP is very useful to measure the roughness and particle shape of aggregates. Couple of aggregates, like standard sand, two different crushed stones, and two different marine aggregates, have been employed. Shape factor of two different marine aggregates is ranged 0.35 to 0.54. Crushed stone I is that of 0.74 which is highly flat, but standard sand is elongated shape. Especially, two marine aggregate showed a big difference of width and length which meaned a long shape. There is any significant difference of elongation ratio and flakiness for each aggregate with different measuring system, like direct measurement of vernier calipers and DIP method. Within the limited test results, DIP is one of useful to get the particle shape of aggregate with limitation of measuring errors and to apply the particle distribution curve.

• Korean Journal of Microbiology
• /
• v.30 no.2
• /
• pp.113-118
• /
• 1992

To elucidate a part of phosphorus cycle an'd the nutritional status of phosphorus. the degradation rates of organic phosphate by phosphatase activity (PA). were studied at the water column of Lake Soyang. from March 1900 to April 1991. Phosphatase activity showed the range of 1-2220 nMillhr. Its maximum value was recortled on August and minimum during October and November. The PA and chlorophyll u v~luess howed high correlation coefficent (0.69). and the values of specific astivity was highest during Winter, 45-12\ulcorner nMihripg chl. a, and lowest on October. 2 nMl hripg chl. 11. The values of PA and bioavailable dissolved inorganic phosphate (DIP) showed negative correlation in surface water. During destratification period (Oct. and Nov. 1990). the values of PA were about 11240 times lower than those during August albeit high concentration of chlorophyll a (1.7- 7.2 mglm'). Such results seem to be cause'd by DIP supply from the metalimnion. hypolimnion ant1 sediment. With these results. phosphate was sufficient to sustain the biomass in Autumn. and internal loading of phosphate shoultl accelerate the eutrophication in Lake Soyang.

• Journal of Korea Foundry Society
• /
• v.31 no.2
• /
• pp.66-70
• /
• 2011

Hot dip aluminizing (HDA) is widely used in industry for improving corrosion resistance of material. The formation of intermetallic compound layers during the contact between dissimilar materials at high temperature is common phenomenon. Generally, intermetallic compound layers of $Fe_2Al_5$ and $FeAl_3$ are formed at the Al alloy and Fe substrate interface. In case of cast iron, high contact angle of graphite existed in the matrix inhibits the formation of intermetallic compound layer, which carry with it the disadvantage of a reduced reaction area and mechanical properties. In present work, the process for the removal of graphite existed on the surface of specimen has been investigated. And also HDA was proceeded at $800^{\circ}C$ for 3 minutes in aluminum alloy melt. The efficiency of graphite removal was increased with the reduction of particle size in sanding process. Graphite appears to be present both in the region of melting followed by re-solidification and in the intermetallic compound layer, which could be attributed to the fact that the surface of cast iron is melted down by the formation of low melting point phase with the diffusion of Al and Si to the cast iron. Intermetallic compound layer consisted of $Fe(Al,Si)_3$ and $Fe_2Al_5Si$, the layer formed at cast iron side contained lower amount of Si.