• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.409-416
• /
• 1994

A double layered photoreceptor using phthalocyanine dye was made by dip-coating method. The under cutting layer(UCL) was coated with A1$\_$2/O$\_$3/ or polyamide, and the charge generation layer(CGL) was formed by .tau.-type metal-free phthalocyanine. The oxadiazole was used as a charge transport layer(CTL) and polycarbonate and poly(vinyl butyral) was employed as a host polymer. The .tau.-H$\_$2/Pc had an absorption peak around 780nm, which coincided with the emitting wavelengths of GaAlAs diode lasers. Maximum charge acceptance of CTL that gives thickness of 12.mu.m was -900V by corona charge of -6.0kV. In photo-induced discharge measurements, residual potential was less than -20V and sufficient for ordinary use, and sample films using of poly(vinyl butyral) was showed good charge retention. In printing test, drum that was employed polycarbonate as a host polymer showed the good print quality.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.59-68
• /
• 2003

Zinc phosphating for cold forming of steel was studied with emphasis on decreasing phosphating temperature. To lower phosphating temperature, some techniques, such as adding Cu ion into bath, using activator in the form of pre-dip, and aeration in bath, instead of using conventional accelerator, namely oxidizing agent, have been tried. It was revealed that phosphating, leading to coatings of improved uniformity and fine crystal size, can be carried out using above techniques at lower temperature (55$^{\circ}C$) compared to conventional phosphating temperature ($80∼90^{\circ}C$). Under present condition, it was seen that optimum concentrations of Cu ion in phosphating bath and activator in pre-dip are 0.015 % (w/w) and 2.0 g/1, respectively. The coating weight was within the range of $\15∼20 g/m^2$. When lubricant was applied into phosphating coatings, the amount of lubricating component (total soap) was found to be$ 6∼10 g/\m^2$ and the lubricated panel revealed excellent lubricating properties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.184-185
• /
• 2011

In this study, in order to obtain a high reflectivity for the LED lead frame, tin dip coating and tin plating were conducted respectively, and wettability of LED lead frame with tin solder also was tested by wetting balance tester. A Cu sheet was plated in Cu brighten electroplating bath and followed by immersion in a Sn electro-less plating bath [1]. On the other hand, in the dip coating process, a Cu sheet was dipped into molten tin. In the progress of wetting test, besides wetting balance curve, the maximum measured force($F_m$), the maximum withdrawal force($F_w$) and zero-cross time($t_0$) were obtained in various temperatures. With the maximum withdrawal force, the surface tension was calculated at different temperatures. The Cu sheet plated with bright Cu and Sn show a silver bright property while that of Cu dipped with Sn possessed a high reflectance density of 1.34GAM at $270^{\circ}C$.

• Journal of KIISE:Databases
• /
• v.32 no.2
• /
• pp.120-128
• /
• 2005

Recently main Bioinformatics databases(DDBJ, ENSEMBL, KEGG, etc.) provide analysis tools and data using web services for the convenience of bioinformaticians. Thus, defining SOAP server objects and their methods are very important to provide services for web services. We define SOAP server objects for interaction databases such as BIND, MINT and DIP.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.183-187
• /
• 2016

Recently, power demand has been increasing every year according to variation of electrical equipments and temperature rise in summer season. So, much more overhead line is being demanded to copy with increasing power demand and operate reliable power system. This paper analysis the characteristics of long span overhead transmission line using special high-tension wire in such as a safety factor, coefficient of elasticity, and the coefficient of linear expansion. Based on the analysis, we proposed the effectiveness of special high-tension wire having much more advantages with respect to height of steel tower and dip compared with conventional ACSR in long span overhead transmission line.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.310-312
• /
• 2004

이 논문에서는, 단백질의 상호작용을 다양한 아미노산의 속성과 Support Vector Machine(SVM)을 사용하여 예측하였다. SVM을 사용한 단백질 상호작용의 예측 시스템에 단백질 상호작용에 중요한 작용을 하는 아미노산의 속성을 사용하고 있다. 이번 실험은 9가지의 아미노산의 속성의 조합 즉, 511(2$^{9}$ -1)가지의 아미노산 속성을 SVM 학습데이터로 사용하여 예측시스템의 결과를 비교한다. 실험에는 Database of Interacting Proteins(DIP)를 사용하였다. 실험을 위하여 DIP의 H.pylori를 학습용데이터로 사용하고, E.coli를 예측데이터(검증데이터)로 사용하였다. 실험에 따르면 H.pylori의 학습데이터와 E.coli를 예측데이터의 가공에 '소수성'을 사용한 방법보다 '방향성'을 사용한 방법이 더 높은 수치를 나타냈다.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.313-320
• /
• 2001

It is well known that the amount of hot-dip Zn coated sheet steels used for automotive is rapidly increasing. As hot-dip steel sheets show good corrosion resistance and excellent formability, the demand for outer panel of automotive has been increased in order to satisfy with the requirement of high surface qualify. There are many kinds of factors influencing on the surface quality and the dross control in the galvanising bath is regarded as one of the most important thing. In this study the characteristic and growing behavior of dross in the galvanizing bath were investigated and the effect of dross on the surface defect of GA was surveyed. The dross defects on the GA sheet steels result from bottom dross whose diameter are larger 50$\mu\textrm{m}$ in the Zn pot. Dross-free state exist for about 30 hours from starting time of GA production.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.6
• /
• pp.466-474
• /
• 2003

To develop a method of detecting dross in coating layer on hot-dip galvanizing steel, chemical etching behavior of the artificial coating layers with top and bottom dross were investigated. After chemical etching with the mixture of picric acid and sodium thiosulfate, each of the top and bottom dross take its distinct color, and alloy layer in coating is also observed. Defects in the coating layers of HGI(hot rolled galvanized iron), CGI(continuous galvanized steel sheet) and GA(galvannealed steel) were analysed, and methods of dross detection which can be applied to inspection process in manufacture were suggested.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.617-621
• /
• 2008

Sequential passes through $Sephadex^{TM}$ columns were used to select phages that displays ligands for dextran ($\alpha$-1,6 linked linear chains) from a phage antibody library. Those phages that bound to the $Sephadex^{TM}$ in each iteration were replicated in E. coli. A phage preparation isolated on the third round selection produced 5.4 nephelos turbidity units (NTU) in a dextran specific immunonephelometric assay, a 2.2 fold higher value than the phage preparation from the first round selection. This phage gave $72\;{\pm}\;10$ normalized intensity (N.I.) in a dip-stick assay against high molecular size dextran (T2000, $2\;{\times}\;10^6) and significantly lower color ($30\;{\pm}\;6$ N.I.) against low molecular size dextran (T10, $10^4$). The presence of an Fab insert in each of these phages was confirmed using a $\beta-galactosidase linked assay and polymerase chain reaction.

• Journal of Trauma and Injury
• /
• v.32 no.1
• /
• pp.47-50
• /
• 2019

Irreducible dislocation of the distal interphalangeal (DIP) joint is a rare traumatic condition commonly seen in sports injuries. Herein, we present a case with chronic dislocation of the DIP joint caused by high energy trauma accompanied by a fracture of the ipsilateral clavicle. The local deformity resulting from the dislocation can be trivial. Therefore, obtaining radiographs of all the interphalangeal joint injuries, regardless of the findings on inspection, is crucial for accurate diagnosis in the case of high energy trauma. The good functional improvement was obtained by open reduction and temporary wire fixation for 4 weeks.