• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.8
• /
• pp.592-597
• /
• 2013

It is widely known that the sound insulation of soundproof panel is highly correlated to two factors, surface density of material and the frequency of noise. Accordingly, the character of traffic noise released in actual situation is important requisite for determining thickness to determine surface density and material of soundproof panel. This present study selected polymer panel with advantage of light weight and workability and evaluates according to frequency of traffic noise. Polypropylene (PP) and high-density polyethylene (HDPE) were selected as subjects based on economic valuation and efficiency. The sound transmission loss of selected polymer panels were compared with the currently used panels such as polycarbonate (PC) and polymethyl methacrylate (PMMA) depending on thickness and materials. As a result, PC showed the highest sound transmission loss followed by PMMA, HDPE, and PP in range of mass law. In terms of acoustic performance on thickness, the transmission loss increased with thickness of soundproof panel meanwhile coincidence dip was observed in lower frequency where had reduced transmission loss. Therefore, it is suggested that after determining target frequency, the kind of materials and thickness of soundproof panel need to be designed so that traffic noise can be more efficiently reduced.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.617-623
• /
• 2001

To predict the seasonal variation of dissolved oxygen (DO) in Hakata bay, Japan, possible 20 time-series of different hourly-solar-radiation intensities were generated based on stochastically changing solar radiation intensity, and a numerical simulation on dissolved oxygen (DO) was carried out for each time series by using the Sediment-Water Ecological Model (SWEM). The model, consisting of two sub-models with hydrodynamic and biological models, simulates the circulation process of nutrient between water column and sediment, such as nutrient regeneration from sediments as well as ecological structures on the growth of phytoplankton and zooplankton, The results of the model calibration followed the seasonal variation of observed water quality well, and generated cumulative-frequency-distribution (CFD) curves of daily solar radiation agreed well with observed ones, The simulation results indicated that the exchange of sea water would have a great influence on the DO concentration, and that the concentration could change more than 1 mg/L in a day. This prediction method seems to be an effective way to examine a solution to minimize fishery damage when DO is depleted.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.146-154
• /
• 2002

To assess the adsorption and removal mechanism of dissolved inorganic nutrients in seawater by scattering yellow loess, a laboratory experiment was conducted for the change of nutrient concentration in seawater during the course of time depending on particle size and scattered concentration of the yellow loess. Twenty four hours after the addition of yellow loess in the size range of 0 $\mu$m to 500 $\mu$m in seawater, the removal rate of dissolved inorganic phosphorus (DIP) was increased with increasing amount of yellow loess. There was little difference among the removal rates depending on the size of yellow loess. On average, $26\%$ of dissolved inorganic silicate was reduced for the same period. No greate difference among the removal rate depending on both size and amount of yellow loess was found. Our results suggested that the removal mechanism of DU seemed to be associated with mostly the chemical bond with iron. More than $99\%$ of initial DU concentration was likely to be removed by this mechanism. In the case of inorganic dissolved silicate, the removal mechanism was likely to be attributed to a cation exchange between the yellow loess and seawater.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.4
• /
• pp.303-309
• /
• 1990

To provide essential information of the role of marine bacteria on the dinoflagellate blooms, distribution of marine bacterial flora and dinoflagellate species was investigated in Chinhae Bay located in southern part of Korea from August 1989 to April 1990. Two hundred and fifty one strains of marine bacteria were isolated from seawater samples collected from the study area. Among them, Flavobacterium spp. and Acinetobacter spp. were the most dominant in bacterial flora. Another 32 strains which comprised 13 percent of total strains were Erythrobacter spp.. Based on the physiological character, Erythrobacter spp. were identified as Erythrobacter longus, Erythrobacter sp.(J-2) and Erythrobacter sp. (J-8). From the phytoplanktonic community, fourteen genera and twenty nine taxa of dinoflagellate species were identified. Based on the spatio-temporal frequence and abundance Gymnodinium sanguneum, Prorocentrum micans and Prorocentrum minimum were the aestival dominent species. However, Heterocapsa triquetra was appeared as predominant species in April. Cell density of about 2,000 cells/ml was prevailed in the bloom of August, but it developed into more intensive bloom of above 500 cells/ml in September. The water quality showed eutrophic or hypereutrophic condition, which was proved by high concentration of dissolved inorganic nitrogen, ortho-phosphate and chemical oxygen demand. Oxygen deficient water mass was found in the bottom overlying waters in August and September. High relationship between abundant bacterial flora and persistent dinoflagellate blooms in eutrophic condition would be approvable.

• Geophysics and Geophysical Exploration
• /
• v.16 no.2
• /
• pp.71-78
• /
• 2013

The one-way wave equation migration is much more computationally efficient comparing with reverse time migration and it can provide better image than the migration algorithm based on the ray theory. We have developed the prestack depth migration module adopting (GS) propagator designed for vertical transverse isotropic media. Since GS propagator considers the higher-order term by expanding the Taylor series of the vertical slowness in the thin slab of the phase-screen propagator, the GS migration can offer more correct image for the complex subsurface with large lateral velocity variation or steep dip. To verify the validity of the developed GS migration module, we analyzed the accuracy with the order of the GS propagator for VTI media (GSVTI propagator) and confirmed that the accuracy of the wavefield propagation with the wide angles increases as the order of the GS propagator increases. Using the synthetic seismic data, we compared the migration results obtained from the isotropic GS migration module with the anisotropic GS migration module. The results show that the anisotropic GS migration provides better images and the improvement is more evident on steeply dipping structures and in a strongly anisotropic medium.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.94-99
• /
• 2004

Anode-supported flat tubular solid oxide fuel cell (SOFC) was investigated to increase the cell power density. The anode-supported flat tube was fabricated by extrusion process. The porosity and pore size of Ni/YSZ ($8mol\%$ yttria-stabilized zirconia) cermet anode were $50.6\%\;and\;0.23{\mu}m$, respectively. The Ni particles in the anode were distributed uniformly and connected well to each other particles in the cermet anode. YSZ electrolyte layer and multilayered cathode composed of $LSM(La_{0.85}Sr_{0.15})_{0.9}MnO_3)/YSZ$ composite, LSM, and $LSCF(La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.7}O_3)$ were coated onto the anode substrate by slurry dip coating, subsequently. The anode-supported flat tubular cell showed a performance of $300mW/cm^2 (0.6V,\; 500 mA/cm^2)\;at\;500^{\circ}C$. The electrochemical characteristics of the flat tubular cell were examined by ac impedance method and the humidified fuel enhanced the cell performance. Areal specific resistance of the LSM-coated SUS430 by slurry dipping process as metallic interconnect was $148m{\Omega}cm^2\;at\;750^{\circ}C$ and then decreased to $148m{\Omega}cm^2$ after 450hr. On the other hand, the LSM-coated Fecralloy by slurry dipping process showed a high area specific resistance.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.270-278
• /
• 2020

In this paper, sound transmission of Micro-Perforated Plates (MPPs) installed in an impedance tube with a circular cross-section is described using an analytic method. Vibration of the plates is expressed in terms of an infinite series of modal functions, where modal function in the radial direction is given by the Bessel function. Under the plane wave assumption, a low frequency approximation is derived, and a formula for the sound transmission coefficient of multi-layered MPPs is presented using the transfer matrix method. The Sound Transmission Losses (STLs) of single and double MPPs are computed using the proposed method and compared with those done by the Finite Element Method (FEM), which shows an excellent agreement. As the perforation increases, the STL is degraded, since the STL becomes dominated by the perforation ratio rather than by vibration of the plate. The STL shows dips at natural frequencies as well as at the mass-spring-mass resonance frequency. The proposed model for the STL prediction in this study can be applied to an arbitrary number of MPPs, where each MPP may or may not have a perforation.

• The Korean Journal of Mycology
• /
• v.48 no.3
• /
• pp.297-312
• /
• 2020

Wilted soybean plants were collected from soybeans cultivation fields in Korea from 2014 to 2016. Fusarium spp., Colletotrichum spp., Rhizoctonia spp., Macrophomina sp., Phytophthora spp., and Calonectria ilicicola were obtained from the infected samples. Out of these, Fusarium spp. were the dominant species (79.1%). In total, 53 isolates were identified as F. solani species complex, F. oxysporum species complex, F. graminearum species complex, and F. fujikuroi species complex based on mycological characteristics. Sequence typing analysis was conducted using translation elongation factor 1 alpha (TEF) to confirm the identification of isolates. All isolates were identified as F. solani, F. oxysporum, F. commune, F. asiaticum, and F. fujikuroi based on phylogenetic analysis of TEF sequences. Pathogenicity of 44 isolates was tested on three cultivars of soybean using the root dip inoculation method. Out of 5 Fusarium species, only F. asiaticum could not cause the symptoms or be weak. Ten isolates were selected based on pathogenic characters and species identification to investigate the host range and screen soybean cultivars for resistance. Fusarium solani, F. oxysporum, and F. commune were aggressive only to soybean, and F. fujikuroi was aggressive to kidney bean, yellow cowpea, black cowpea, adzuki bean as well as soybean. All 13 Korean soybean cultivars were susceptible to F. commune and F. fujikuroi. Out of 13 cultivars, cv. Janggi, cv. Poongsannamul, and cv. Socheongja were resistant to Fusarium wilt, while cv. Hwanggeumol and Chamol were susceptible to Fusarium wilt.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.391-397
• /
• 2015

NiO catalysts/$Al_2O_3$/FeCrAl alloy foam for hydrogen production was prepared using atomic layer deposition (ALD) and subsequent dip-coating methods. FeCrAl alloy foam and $Al_2O_3$ inter-layer were used as catalyst supports. To improve the dispersion and stability of NiO catalysts, an $Al_2O_3$ inter-layer was introduced and their thickness was systematically controlled to 0, 20, 50 and 80 nm using an ALD technique. The structural, chemical bonding and morphological properties (including dispersion) of the NiO catalysts/$Al_2O_3$/FeCrAl alloy foam were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy and scanning electron microscopy-energy dispersive spectroscopy. In particular, to evaluate the stability of the NiO catalysts grown on $Al_2O_3$/FeCrAl alloy foam, chronoamperometry tests were performed and then the ingredient amounts of electrolytes were analyzed via inductively coupled plasma spectrometer. We found that the introduction of $Al_2O_3$ inter-layer improved the dispersion and stability of the NiO catalysts on the supports. Thus, when an $Al_2O_3$ inter-layer with a 80 nm thickness was grown between the FeCrAl alloy foam and the NiO catalysts, it indicated improved dispersion and stability of the NiO catalysts compared to the other samples. The performance improvement can be explained by optimum thickness of $Al_2O_3$ inter-layer resulting from the role of a passivation layer.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.26-32
• /
• 2017

We studied the effects of dip treatments of natural extracts (Camellia sinensis, Angelica gigas, Astragalus membranaceus, Glycyrrhiza uralensis: 1% extract) on the quality of peeled 'Daebo' chestnut. After dipping treatment peeled chestnuts were vacuum packaged with $75{\mu}m$ PE+Nylon 7-layer film then stored in $4^{\circ}C$ incubator for 35days. The quality changes including the surface color and off-odor were evaluated for storage days. The natural extracts dipping treatment on peeled chestnut was effective on skin browning inhibition. Especially, Astragalus membranaceus and Glycyrrhiza uralensis extract treatments was significantly effective in reducing surface browning. The color change (${\Delta}E$) of peeled chestnut was the highest (5.6) in control, whereas that was the lowest (3.4) under Astragalus membranaceus extract treatment at 35 storage day. The natural exteacts treatments had no effect on the weight, the mositure loss rate, the firmness and the soluble solid contencts of peeled chestnuts during storage after treatment. The decaying rate of peeled chestnut was 9.0% in control, 9.0% in Camellia sinensis extract treatment, 9.0% in Angelica gigas extract treatment, 21.0% in Astragalus membranaceus extract treatment, and 7.0% Glycyrrhiza uralensis extract treatment at 35 storage day. Sensory evaluation revealed significant differences in off-odor and color attributes. After all, the score of overall sensory evaluation was the lowest in Astragalus membranaceus extract treatment and the highest in Glycyrrhiza uralensis extract treatment. As the results, the natural extract treatments, especially with vacuum packing after Glycyrrhiza uralensis extract treatment, extended the shelf-life of the peeled chestnut by inhibiting the surface browning.