• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.50-55
• /
• 1991

Mg 원자선속의 냉각에 쓰일 diode laser의 특성과 이용가능성을 연구하였다. Mg 원자의 3P2-3D3 천이의 공명선 383.8nm를 얻기 위하여 Mitsubishi사의 ML형 laser diode를 택하여 주입전류와 온도를 변화시키고, 회절격자를 써서 767.6nm의 laser 광을 얻은 후 LiIO3 결정에 의해 383.8nm인 제2조화파를 생성하였다. Ring cavity 내에서 기본파가 공명할 때 증강계수는 15이었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.103-106
• /
• 2006

Semiconductor laser diode has a reflective facet in a both-ends side fundamentally. Laser performance for improving, Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing superluminescent diode and reducing the reflection-induced intensity noise of laser diode, it's key techniques are AR/HR coatings. In the study AR coating film were manufactured by Ion-Assisted Deposition(IAD) system. Then manufactured coating film measurement electrical properties(L-I-V, Se, Resistor) and Optical properties (wavelength FFP)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.674-678
• /
• 2008

Low level laser therapy has various therapy effects. This paper performed the basic study for fabricating the low level laser therapy apparatus, and one of the goals of this paper was to make this apparatus used handily. The apparatus has been fabricated using the laser diode and microprocessor unit. The apparatus used a 635 nm laser diode for laser medical therapy and was designed for a pulse width modulation type to increase stimulation effects. In this study, the designed device was used to find out how 635 nm laser diode affected the skin injury of SD-Rat(Sprague-Dawley Rat). We divided the participants into two groups; irradiation group which was irradiated 10 minutes a day for 9 consecutive days, and none irradiation group. The results showed that the study group had lower incidence of inflammation and faster recovery, compared with the control group.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.201-208
• /
• 2007

The purpose of this study was to evaluate the effect of diode laser & desensitizing agents to overcome hypersensitizing root surfaces problem after periodontal treatment. 20 patients(60 teeth) presented were volunteered in this study. Diode laser & MS coat was respectively applied on hypersensitizing root surfaces after periodontal treatments. Following application they were evaluated immediately. The results were as follows: 1. The frequency and degree of root surface hypersensitivity levels were measured by the sequence of tactile and air stream. 2. Reduction of root surfaces hypersensitivity by tactile were for Diode laser and Ms coat application respectively $3.0294{\pm}2.0224$ and $3.2692{\pm}1.6139$. 3. Reduction of root surfaces hypersensitivity by air stream were for Diode laser and Ms coat apapplication respectively $3.0294{\pm}2.0224$ and $2.2692{\pm}1.6139$. 4, It could be said that Diode Laser and Ms coat application were significantly effective in reducing dentin hypersensitivity as far as concerned effect, Ms coat applicatio showed more effective than Diode laser. In conclusion, both methods were significantly effective in reducing dentinal hypersensitivity. Therefore, it was recommended that Diode laser and desensitizing agents could be used routinely for patients dentinal hypersensitivity following periodontal treatment.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.30-36
• /
• 2004

The development of LD(Laser Diode) tester and its control system based on the graphical programming language(LabVIEW) is addressed. The ill tester is used to check the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the Detector(optic fiber and photo diode) are very small, therefore the test device needs high accuracy. But each motion part of the test device could not accomplish high accuracy due to the limit of the mechanical performance. So, an image processing with machine vision is proposed to compensate for the error. By adopting our method we can reduce the error of position within $\pm$5$\mu\textrm{m}$.

• Journal of ILASS-Korea
• /
• v.9 no.4
• /
• pp.67-76
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, reasonable cost, robustness, and ease of use. In addition, diode lasers we fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develop new gas sensing system and to verify feasibility of this system. Wavelength modulation spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.424-425
• /
• 2007

Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing super luminescent diode and reducing the reflection-induced intensity noise of laser diode. Anti-Reflection coating Film was designed by Macleod Simulator. Coating Materials were decided $Ti_3O_5$ and $SiO_2$. Thickness of Coating layer $Ti_3O_5/SiO_2$ were 105[nm], 165[nm]. In the study Anti-Reflection coating Film was design for Laser diode and deposited by Ion-Assisted Deposition system. Then manufactured thin film measured electrical properties(L-I-V, Se, Resistor) and Optical properties(wavelength FFP). Slop-efficiency and FFP characteristic is 0.302[W/A], $22.3^{\circ}$(Horizontal), $24.4^{\circ}$(Vertical).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.285-287
• /
• 2009

When the laser diode is operated with continuous current, the light intensity from the laser diode deceases with time due to the temperature rise in the active layer. The phenomena, which is often called as DROOP, should be minimized in order to be used as a light source for the laser beam printer. We experimently examined the influences of the laser parameters such as threshold current, differential quantum efficiency on droop. It was found that decreasing the differential quantum efficiency of the laser diode is the effective way to minimize droop.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.514-515
• /
• 2008

Low level laser therapy has various therapy effects. This paper performed the basic study for developing the Low Level Laser Therapy Equipment for medical treatment. The apparatus has been fabricated using the laser diode and microprocessor unit. This equipment was fabricated using a micro-controller and a laser diode, and designed to enable us to control light time, frequency and so on. In this study, the designed device was used irradiation to find out how 850 nm laser diode affected the cell proliferation of RAT bone-marrow cells. Experiment was performed to irradiation group and non-irradiation group for Rat bone marrow cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590 nm transmittance of micro plate reader. As a result, the cell increase of Rat bone marrow cells was verified in irradiation group as compared to non-irradiation group. The fact that specific wavelength irradiation has an effect on cell vitality and proliferation is known through this study.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.59-60
• /
• 2014

In this paper, development of laser diode driver with 2.5kW rating is presented. The driver is configured with interleaved PFC converter, high frequency full bridge DC-DC converter, two laser diode drivers and ${\mu}$-processor based controller. The system has two laser diode drivers for providing high current and low current. High current driver delivers normal output power of diode; low current driver is for providing critical current of diode for long lifetime. Computer simulation and experiment was performed for verification, as the results, developed driver performs well.