• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1882-1884
• /
• 1999

The photoisomerization of functional polyimide was investigated in the various temperatures and UV(360nm) & visible(450nm) light irradiation. The absorption spectrum of azobenzene containing polyamic acid in a mixture of N,N-dimethylacetamide and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The absorption spectrum of LB films are also induced photoisomerization by UV and visible light irradiation.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.353-361
• /
• 2018

Fouling characteristics of humic substances on tight ultrafiltration (UF) membrane have been investigated. The tight UF membrane was prepared by blending polysulfone (PSf) in N.N-dimethylacetamide (DMAc) with 25%wt of Polyethylene glycol (PEG400) and 4%wt of acetone. Fouling characteristic of the modified PSf membrane was observed during peat water filtration in different trans-membrane pressure (TMP). It was found that the acetone modified membrane provided 13% increase in TMP during five hours of peat water filtration, where a stable flux was reached within 150 minutes. Meanwhile, the increase of TMP from 10 psig to 30 psig resulted in a fouling resistance enhancement of 60%. Furthermore, based on the fouling analysis, fouling mechanism at the first phase of filtration was attributed to intermediate blocking while the second phase was cake formation.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.48-56
• /
• 2011

In this study, we investigated the C-V diagrams and metal surface related to the electrochemistry characterization of metal(nickel, SUS-304). We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150, 200 and 250 mV/s. As a result, the C-V characterization of metal using N,N-dimethylacetamide and N,N-dimethylformamide inhibitors appeared irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic corrosion inhibitors, adsorption film constituted, and the passive phenomena happened. According to the results by cyclic voltammetry method, it was revealed that the addition of inhibitors containing amide functional group enhances the corrosion resistance properties.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.63-67
• /
• 2009

m-Aramid dissolved in N,N-dimethylacetamide (DMAc), were coagulated in different coagulants such as water, methanol, ethanol, propanol and butanol. Various concentrations and temperatures of the coagulants were also used to evaluate dyeing properties of coagulated m-aramid films. Field emission scanning electron microscopy (FE-SEM) was employed to investigate the surface morphology of m-aramid films. Wide angle X-ray diffraction (WAXD) was conducted in order to measure crystallinity change of mcaramid fibers and films. WAXD patterns showed that crystallinity of m-aramid fibers was reduced after film formation. In addition, color depth (K/S value) was measured and the results revealed that the film coagulated in water possessed fairly enhanced color depth.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.130-133
• /
• 2003

폴리이미드(poly(imide), PI)는 반복 단위 내에 이미드 그룹을 함유하고 있는 고분자로 매우 강한 물리적인 특성을 지니며 열적 및 화학적 안정성이 매우 큰 고분자이다[1-4]. 그러나 이는 대부분이 불용ㆍ불융하기 때문에 프리커서인 poly(amic acid) (PAA) 용액 상태에서 어느 특정한 형태로 가공한 후 열적 혹은 화학적 방법에 의해 이미드 구조로 전환시켜준다. PAA 용액에 사용되는 용매로는 N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), N,N-dimethyl-formamide(DMF) 등과 같이 비등점이 높은 극성 용매들이 사용되어진다. (중략)

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.14-18
• /
• 2005

Under irradiation in a microwave oven, six novel poly(amide-imide)s containing tetrahydropyrimidinone, tetrahydro-2-thioxopyrimidine moieties and trimellitic rings in their main chains were synthesized through the polycondensation reaction of N,N'-(4,4'-diphenylether)bis(trimellitimide) diacid chloride with six different derivatives of tetrahydropyrimidinone and tetrahydro-2-thioxopyrimidine in the presence of a small amount of a polar organic medium, such as o-cresol. The polycondensation proceeded rapidly and completed within 7-9 min, producing a series of new poly(amide-imide)s in high yield that showed inherent viscosities in the range 0.33-0.52 dL/g. These poly(amide-imide)s were characterized by elemental analysis, viscosity measurement, thermal gravimetric analysis, solubility test, and FT-IR spectroscopy. All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofuran, and N-methyl-2-pyrrolidone.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.128-132
• /
• 2004

This paper presents the design, fabrication sequence and measurement results of a highly sensitive capacitive-type humidity sensor using a polyimide film without hydrophobic elements. The structure of the humidity sensor is MIM (metalinsulator-metal). For a high sensitivity, a modified aromatic polyimides as a moisture absorbing layer has been synthesized instead of using general polyimides containing hydrophobic elements. The polyimide film was obtained by synthesizing and thermally polymerizing polyamic acid composed of m-pyromellitic dianhydride, phenelenediamine and dimethylacetamide. Characteristics of fabricated sensors which include sensitivity, hysteresis and stability have been measured. The measurement result shows the percent normalized capacitance change of 0.37/%RH over a range from 10 to 90%RH, hysteresis of 0.77% over the same %RH range and maximum drift of 0.25% at 50%RH. The result shows that the developed humidity sensor can be applied to evaluate a hermeticity of various sensors and actuator systems as well as micro packages.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.258-262
• /
• 2004

We have developed facile and rapid polycondensation reactions of N-trimellitylimido-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h, in the presence of a small amount of a polar organic medium, such as Ο-cresol, by using a domestic microwave oven. The polycondensation reactions proceeded rapidly-they were complete within 7-9 min-to produce a series of novel optically active poly(amide-imide)s (3a-h) in high yield with inherent viscosities of 0.33-0.51 dL/g. We characterized the resulting poly(amide-imide)s by elemental analysis, thermal gravimetric analysis (DSC, TGA, and DTG), and FTIR spectroscopy, and by measuring their viscosities, specific rotations, and solubilities. All of the polymers were soluble at room temperature in polar solvents such as N ,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofuran, and N-methyl-2-pyrrolidone.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.205-214
• /
• 2020

A series of wholly aromatic polyhyroxyamide (PHA) copolymers were prepared by direct polycondensation reaction of isophthalic acid and diacids containing bulky units with 3,3'-dihydroxybenzidine. The inherent viscosities of the PHAs measured at 35℃ in DMAc solution were in the range of 0.31-0.56 dL/g. The solubility study revealed that the PHAs were readily soluble in aprotic solvents such as, dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), and N-methyl-2-pyrrolidone (NMP) at room temperature and in less polar solvent such as pyridine. However, the polybenzoxazole (PBO) copoymers were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid and partially soluble in NMP containing LiCl. The PBO copolymers showed maximum weight loss temperature in the range of 593-632℃ and high char yields in the range of 65.0-71.2% at 900℃ in a nitrogen atmosphere.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.475-478
• /
• 2000

Maxwell displacement current(MDC) was generated when the area per molecule was about 140${\AA}$$^2$and 100${\AA}$$^2$. MDC were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N,N-dimethylacetamide(DMAc) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The precursor LB film was heated in a vacuum dry oven at 120$^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.