• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 특별 심포지엄
• /
• pp.89-100
• /
• 2009

3-dimensional modeling methods have been used in the every step of resource development; Exploration, reserve estimation, mine feasibility study, mine design and mine production. This report shows seven cases for which 3-dimensional modeling is used in resource development. Six projects deal with resource esimation, mine feasibility study and production. And another deals with mine rehabilitation. These cases show that 3-dimensional modeling method is beneficial to understand the real state of ore deposit and complex underground structures. Moreover, 3-dimensional modeling is the most efficient method for mine planning and management in the every step of resource development.

• 한국측량학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2006

효율적인 3차원 모델링은 건설, 기계 그리고 디자인과 같은 폭넓은 설계분야에서 필수적으로 되고 있다. 특히, 역설계를 가능케 하는 툴로써 발전하고 있다. 3차원 모델링은 신속성, 정확성 그리고 명확성이 요구된다. 모델링을 위한 데이터 획득은 접촉식 좌표측정기, 레이져스캐너, 패턴스캐너 그리고 수치사진측량방법을 이용한다. 본 연구에서는 모델링 기법을 분석하고 패턴스캐너를 이용한 3차원 모델링기법을 소개하고자 한다. 또한, 본 연구는 OPTO-Top 패턴스캐너를 이용하여 3차원 모델링을 시도하고 신속성과 효율성을 수치사진측량기법과 비교분석하였다. 아울러 3차원으로 사용자가 웹환경에서 시뮬레이션 할 수 있는 환경구축을 시도하였다.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2002년도 봄 학술발표회 논문집
• /
• pp.262-263
• /
• 2002

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1151-1156
• /
• 2013

In this study, to clearly establish the concept of a geometric modeling I apply for the concept of Pushbroom, limited to two-dimensional radiation Locator to provide a three-dimensional information purposes. Respect to the radiation scanner Pushbroom modeling techniques, geometric modeling method was presented introduced to extract three-dimensional information as long as the rotational component of the Gamma-Ray Linear Pushbroom Stereo System, introduced the two-dimensional and three-dimensional spatial information in the matching relation that can be induced. In addition, the pseudo-inverse matrix by using the conventional least-squares method, GCP(Ground Control Point) to demonstrate compliance by calculating the key parameters. Projection transformation matrix is calculated for obtaining three-dimensional information from two-dimensional information can be used as the primary relationship, and through the application of a radiation image matching technology will make it possible to extract three-dimensional information from two-dimensional X-ray imaging.

• 한국CDE학회논문집
• /
• 제3권3호
• /
• pp.168-176
• /
• 1998

This paper deals with an application on the mould machining of air intake hose product by using 3-dimensional parametric modeling techniques. The detailed domain is the 3-dimensional product with similar shapes and different sizes which needs too much working time for preparation of modeling or machining due to making a trial and errors repeatedly. Decision making rules for selection of modeling order and technique, and for calculation of cutting conditions, and for determination of sequence and method concerning machining operations are required by interview of expert engineers in the field. The developed expert system of modeling and machining is programmed by using a user programming language under the CAD/CAM software of the Personal Designer. The developed system that aids a mould engineer who is working in the modeling and machining section which deal with air intake hose product provides strong and useful capabilities.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.897-911
• /
• 2015

This study presents a novel approach based on advancements in Evolutionary Computation for data-driven modeling of complex multi-dimensional memory-dependent systems. The investigated example is a benchmark coupled three-dimensional system that incorporates 6 Bouc-Wen elements, and is subjected to external excitations at three points. The proposed technique of this research adapts Genetic Programming for discovering the optimum structure of the differential equation of an auxiliary variable associated with every specific degree-of-freedom of this system that integrates the imposed effect of vibrations at all other degrees-of-freedom. After the termination of the first phase of the optimization process, a system of differential equations is formed that represent the multi-dimensional hysteretic system. Then, the parameters of this system of differential equations are optimized in the second phase using Genetic Algorithms to yield accurate response estimates globally, because the separately obtained differential equations are coupled essentially, and their true performance can be assessed only when the entire system of coupled differential equations is solved. The resultant model after the second phase of optimization is a low-order low-complexity surrogate computational model that represents the investigated three-dimensional memory-dependent system. Hence, this research presents a promising data-driven modeling technique for obtaining optimized representative models for multi-dimensional hysteretic systems that yield reasonably accurate results, and can be generalized to many problems, in various fields, ranging from engineering to economics as well as biology.

• 자원환경지질
• /
• 제33권1호
• /
• pp.41-50
• /
• 2000

Geo-radar survey which has the advantage of high-resolution and relatively fast survey has been widely used for engineering and environmental problems. Three-dimensional effects have to be considered in the interpretation of geo-radar for high-resolution. However, there exists a trouble on the analysis of the three dimensional effects. To solve this problem an efficient three dimension numerical modeling algorithm is needed. Numerical radar modeling in three dimensional case requires large memory and long calculating time. In this paper, a finite difference method time domain solution to Maxwell's equations for simulating electromagnetic wave propagation in three dimensional media was developed to make economic algorithm which requires smaller memory and shorter calculating time. And in using boundary condition Liao absorption boundary. The numerical result of cross-hole radar survey for tunnel is compared with real data. The two results are well matched. To prove application to three dimensional analysis, the results with variation of tunnel's incident angle to survey cross-section and the result when the tunnel is parallel to the cross-section were examined. This algorithm is useful in various geo-radar survey and can give basic data to develop dat processing and inversion program.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.668-671
• /
• 2010

무차원 추진제 모델링 기법과 1차원 추진제 모델링 기법을 사용하여 약실 내 추진제 모델링 기법에 대한 비교 연구를 수행하였다. 무차원 추진제 모델링의 경우 약실 내 추진제 위치 및 배열에 대한 묘사가 불가능 하지만 1차원 추진제 모델링의 경우에는 가능하다. 따라서 약실 내 추진제 배열에 따른 강내탄도 성능해석 시 무차원 추진제 모델링의 경우 강내 마이너스 차압의 예측이 불가능하지만 1차원 추진제 모델링의 경우 예측이 가능함을 확인했으며, 이를 통해 강내탄도 성능해석 시 1차원 추진제 모델링의 필요성을 확인했다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.100-103
• /
• 2008

Recently Development of construction system that subjective operators share and control information efficiently based on the three-dimensional space and design information throughout life cycle of construction project is progressing dynamically. In case of civil structures which are infrastructure, Demand for structure of complex system which has multi-functions such as super and smart bridges and express rails is increasing and system development which computerizes and integrates process of structure design is in need. For that, research about link way between three dimensional modeling data and structure analysis programs should be preceded. In this research, therefore, research about interface design between three dimensional virtual modeling data to automate efficient civil-structure-design and nonlinear finite element analysis program which is made up of reinforced concrete material model that express material's character clearly.

• 한국전자거래학회지
• /
• 제1권1호
• /
• pp.141-157
• /
• 1996

Data sharing is a major challenge to implement CALS. STEP is the international standard for the product model data exchange among heterogeneous systems and plays a key role in CALS. Advances in computer networks are rapidly changing the product development processes. The network oriented modeling system premises to integrate design activities across the enterprise. To achieve goals of CALS 3-dimensional concurrent modeling that complies international standard is required since integrity and common perception of product data can be assured. This paper presents 3-dimensional concurrent geometric modeling on high speed network using STEP and methodologies.