• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.807-815
• /
• 2001

Two-dimensional (2D) correlation method, which generates the synchronous and the asynchronous 2D spectrum by complex cross correlation of the Fourier transformed spectra, is an analysis method for the changes of the sample spectrum induced by vari ous perturbations. In the present work, the 2D electronic correlation spectra have been simulated for the cases where the sample spectrum composed of two gaussian bands changes linearly. When only the band amplitudes of the sample spectrum change, the synchronous spectrum shows strong peaks at the band centers of the sample spectrum, but the asynchronous spectrum does not make peaks. When the sample spectrum shifts without changing intensity and width, the synchronous spectrum shows peaks around the initial and final positions of the band maximum and the asynchronous spectrum shows long peaks spanning the shifting range. The band width change produces the complex 2D correlation spectra. When the sample spectrum shifts with band broadening, the width change by 50% of full width at half maximum (FWHM) does not give so large an effect on the correlation spectrum as the spectral shift by one half of FWHM of the sample spectrum.

• The Journal of the Korean dental association
• /
• v.50 no.2
• /
• pp.72-82
• /
• 2012

Recently in treatment planning for orthognathic surgery, 3-dimensional analysis using CBCT can give more detailed information that cannot be achieved with 2-dimensional cephalograms. Also, laser Scanning and 3D camera can show 3-dimensional information on soft tissue changes as well as hard tissue changes in orthognathic surgery patients. In other words, soft tissue changes in lateral facial area as well as mid facial area can be quantitatively calculated. To bring out the best results from orthognathic surgery, close interaction between orthodontist and oral surgeon is needed and well treated pre-surgical orthodontics can simplify orthognathic surgical plan that also results in good long-term stability. In surgery-first cases, more thoughtful diagnosis and pre-operative preparation will be needed to prevent complicated problems.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.2
• /
• pp.66-73
• /
• 2022

Partial-hardened hot stamping has been well known to be very effective to absorb more energy in automotive lateral crash. Hardness distribution and dimensional change after partial-hardened hot stamping have been studied to find out effect of thermal deformation of the heated hot stamping die on dimensional accuracy of automotive center pillar. Soft zone of commercial center pillar showed 275~345 in Vickers hardness, indicating bigger non-uniformity which resulted from thermal deformation of heated die. Dimensional changes in soft zone of the commercial center pillar measured by three dimensional scanner were much bigger than that in hard zone. It has been found that hot stamping die compensation considering thermal deformation in soft zone causes a significant decrease in hardness deviation in the soft zone, corresponding to 20 percent of commercial center pillar and subsequently leads to much higher dimensional accuracy.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.86-97
• /
• 2020

Objective: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment. Methods: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption. Results: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG. Conclusions: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

• The korean journal of orthodontics
• /
• v.49 no.5
• /
• pp.286-298
• /
• 2019

Objective: The objectives of this study were to evaluate linear and volumetric alveolar changes induced by nasoalveolar molding (NAM) in infants with complete unilateral cleft lip and palate (UCLP) and compare the maxillary dimensions after NAM with the normal dimensions in infants without clefts. Methods: A total of 26 infants with UCLP treated by NAM (mean age before and after NAM: $14.20{\pm}8.09days$ and $118.16{\pm}10.06days$, respectively) comprised the treatment group, while 26 infants without clefts (mean age: $115.81{\pm}8.71days$) comprised the control group. Changes in the maxillary dimensions following NAM were measured on three-dimensional models using Mimics software, version 17.0. Results: During NAM, there was a decrease in the cleft widths, maxillary arch depths, and rotation of the greater segment. While the anterior alveolar arch width exhibited a significant decrease, the posterior arch width was mostly maintained. There were no changes in the anterior vertical deviations of the alveolar segments. The alveolar crest lengths, arch circumference, and bilateral posterior volumetric measures exhibited an increase. After NAM, the anterior arch width was comparable between the treatment and control groups, whereas the posterior arch width and anterior vertical deviations were greater in the treatment group than in the control group. The maxillary arch depths, alveolar crest lengths, and maxillary volumes were smaller in the NAM group than in the control group. Conclusions: During NAM in infants with UCLP, the cleft width and anteroposterior and transverse alveolar dimensions exhibited a decrease while the vertical dimensions were maintained. Compared with infants without clefts, those with UCLP treated by NAM exhibited sagittal and vertical alveolar growth deficiencies and tissue insufficiency.

• Korean Journal of Radiology
• /
• v.22 no.3
• /
• pp.435-441
• /
• 2021

Objective: To evaluate the usefulness of the ventricular volume percentage quantified using three-dimensional (3D) brain computed tomography (CT) data for interpreting serial changes in hydrocephalus. Materials and Methods: Intracranial and ventricular volumes were quantified using the semiautomatic 3D threshold-based segmentation approach for 113 brain CT examinations (age at brain CT examination ≤ 18 years) in 38 patients with hydrocephalus. Changes in ventricular volume percentage were calculated using 75 serial brain CT pairs (time interval 173.6 ± 234.9 days) and compared with the conventional assessment of changes in hydrocephalus (increased, unchanged, or decreased). A cut-off value for the diagnosis of no change in hydrocephalus was calculated using receiver operating characteristic curve analysis. The reproducibility of the volumetric measurements was assessed using the intraclass correlation coefficient on a subset of 20 brain CT examinations. Results: Mean intracranial volume, ventricular volume, and ventricular volume percentage were 1284.6 ± 297.1 cm³, 249.0 ± 150.8 cm³, and 19.9 ± 12.8%, respectively. The volumetric measurements were highly reproducible (intraclass correlation coefficient = 1.0). Serial changes (0.8 ± 0.6%) in ventricular volume percentage in the unchanged group (n = 28) were significantly smaller than those in the increased and decreased groups (6.8 ± 4.3% and 5.6 ± 4.2%, respectively; p = 0.001 and p < 0.001, respectively; n = 11 and n = 36, respectively). The ventricular volume percentage was an excellent parameter for evaluating the degree of hydrocephalus (area under the receiver operating characteristic curve = 0.975; 95% confidence interval, 0.948-1.000; p < 0.001). With a cut-off value of 2.4%, the diagnosis of unchanged hydrocephalus could be made with 83.0% sensitivity and 100.0% specificity. Conclusion: The ventricular volume percentage quantified using 3D brain CT data is useful for interpreting serial changes in hydrocephalus.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.657-670
• /
• 1991

It was said that early rapid palatal expansion was the treatment of choice in case of maxillary constriction with posterior crossbite. The author tried to assess dimensional changes of nasal and oral cavity before rapid palatal expansion and over 4 months of retention by use of three coronal tomograms through the incisal, molar, and maxillary tuberosity areas. The subjects of this study were consisted of 9 boys and 11 girls ranging from 11 to 13 years old. The results were as follows: 1. A mean change in maxillary first molar width was 3.68mm and a mean change in nasal cavity width was 2.26mm after 6.70mm expansion by Hyrax-type screw and over 4 months of retention tomographically in molar cut. 2. A change in nasal cavity width tomographically showed in order of molar cut, incisal cut, maxillary tuberosity cut respectively. 3. There was no correlation between changes in oral cavity width and nasal cavity width.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.51-55
• /
• 2000

Purpose : The purpose of this study is to setup a standard treatment protocol in surgical correction of skeletal malocclusion with Angle Class III patients. We asessed the soft tissue changes according to skeletal changes of patients who have undergone orthognathic surgery with bilateral split sagittal ramus osteotomy (BSSRO) and advancing genioplasty. Materials & Methods : The soft tissue change of 9 skeletal Class III patients was assessed after BSSRO and advancing genioplasty. The patient group was skeletal Class III who was surgically treated by BSSRO & advancing genioplasty. The average follow up period is 13 months with the range of 6 and 30 months. All patients have undergone preoperative and postoperative orthodontic treatment. The assessment was devided into two groups. One was antero-posterior relationship and the other was vertical relationship of dimensional changes of soft tissue after orthognathic surgery. Results : In antero-posterior dimensional changes after surgery, the percentage of soft tissue change in comparison to hard tissue was 89%. Vertical ratio after surgery, 86% soft tissue changes were assessed.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.226-232
• /
• 2014

To understand transition characteristics from wood to charcoal the dimensional changes of carbonized woods at low temperature from $300^{\circ}C$ to $350^{\circ}C$ at the intervals of $10^{\circ}C$ were investigated. Three species of hardwoods and two species of softwoods were used in this study. Measurements of dimensional changes of cells were observed by stereoscopic microscope and an image analyzer. The apparent volume of each specimen decreased greatly with increasing temperature. Severe cracks and collapse were observed frequently in hardwoods and hardly in softwoods. Vessel diameter and tracheid cell wall thickness of the wood samples were decreased with increasing carbonization temperature. Contraction of vessel diameter in tangential direction was greater than that in radial direction. Cell wall thickness of tracheids decreased with increasing carbonization temperature. Consequently, even though it was small range of carbonization temperature, dimensions of wood components were changed considerably.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.715-718
• /
• 1998

In this work, bisphenol type vinyl ester was impregnated into the three-dimensional glass fabrics fabricated from different thickness changes. Their mechanical properties of the specimens have been investigated by three-point bending and flatwise compression tests. Also, interlaminar shear strength (ILSS) has been determined through short-beam test for the evaluation of interfacial adhesion at interfaces between fibers and matrix of the composites. The effect of thickness changes in three-dimensional glass fabric-reinforced composites have been described in this work.