• KSBB Journal
• /
• 제11권4호
• /
• pp.476-480
• /
• 1996

Using Pseudomonas sp. B3, identified and isolated from nature, wastewater containing phenol was treated in a continuous stirred tank reactor and its reaction characteristics were studied. Average concentrations of phenol and COD in effluents were 1.5mg/L and 124mg/L at 0.059h-1 dilution rate, respectively. At the dilution rate higher than 0.063h-1, phenol and COD increased abruptly to 19mg/L and 318mg/L. At the dilution rate higher than 0.059h-1, biomass concentration suddenly decreased and was "washed out". Biomass concentration was 150mg/L at a dilution rate of 0.067h-1. Maximum biomass production rate was 15.98mg/L$.$h at a dilution rate of 0.067h-1. When dilution rate increased above 0.059h-1, effluent phenol concentration abruptly increased and biomass production rate decreased. Maximum cell growth rate(${\mu}$max) and Michaelis-Mentens kinetic constant(Ks) were 0.074h-1 and 0.424mg/L, respectively. From the above result low phenol concentration can be expected at a maximum dilution rate, but reactor becomes unstable due to phenol inhibition.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.98-102
• /
• 1996

This study investigated performance of the phenol degradation and reaction characteristics according to variation of phenol volumetric loading rates and dilution rates in suspension and PACT reactors using Pseudomonas sp. B3. 1. Removal efficiencies of the PAC unit indicated about 100 % with phenol volumetric loading rates from 0.4 phenol $kg/ma^3\cdot d$ to 1.2 phenol $kg/m^3\cdot d$, however, which of the suspension reactor showed about 100% with from 0.2 phenol $kg/m^3\cdot d$ to 0.75 phenol $kg/ma^3\cdot day$. 2. The cell density slightly was decreased from 298.2 mg/l to 272 mg/l, when dilution rate for suspension was reactor increased from 0.4 to 1.41 1/d, and also the cell density suddenly was decreased to 145.5 mg/l and was washed out at the dilution rate higher than 1.60 1/d. But the cell density for the PAC unit was linearly decreased with dilution rate of from 0.8 to 3.0 1/d, and showed 220.75 mg/l at maximum dilution rate. 3. The phenol utilization rate was increased from 0.008 to 0.031 phenol g/l$\cdot$h, when dilution rate for suspension reactor was increased from 0.4 to 1.5 1/d, however, the rate for the PAC unit was linearly increased from 0.017 to 0.061 phenol g/l$\cdot$h as variation changes from 0.017 to 0.061 phenol g/l$\cdot$h dilution rate.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.61-62
• /
• 2012

The present study has numerically investigated the effects of fuel-side dilution and pressure on flame structure and extinction scalar dissipation rate of turbulent syngas nonpremixedd flames. Numerical results indicate that for highly diluted case, peak temperature is decreased and stoichiometric mixture fraction is increased. By decreasing the pressure and the nitrgen dilution levelcreased, the extinction scalar dissipation rate is increased.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2003년도 제20차 정기총회 및 학술발표회
• /
• pp.107-108
• /
• 2003

채취한 정액에 대하여 희석액의 배율을 달리하고 보존온도를 다르게 하여 3시간 보존 후 정자의 운동성 및 수정률을 조사한 결과, 정자 운동성은 5$^{\circ}C$ 냉장보존 온도에서 희석배율에 따른 차이를 보이지 않았으나, $25^{\circ}C$ 상온보존에서는 정액과 희석액이 1:1 희석배율보다 1：3 및 1：6 희석배율이 정자 운동성이 현저히 높았고(P<0.05), 35$^{\circ}C$ 고온보존에서도 1:1 희석배율보다 1:3 및 1:6 희석배율이 정자 운동성이 현저히 높은 것으로 나타났다(P<0.05). 5$^{\circ}C$에서 3시간 냉장보존 후 인공수정을 하였을 때 1:1~1:6의 희석배율에 따른 수정률의 차이를 보이지 않았고, $25^{\circ}C$ 상온보존에서도 희석배율에 따른 수정률의 차이를 보이지 않았으나, 35$^{\circ}C$의 고온보존에서는 1：1 희석배율보다 1:3 및 1:6 희석배율에서 수정률이 현저히 향상되었다(P<0.05). 이상의 결과로 보아 여름철 고온시는 1:1의 희석배율보다는 1:3 이상의 희석배율을 사용함이 좋을 것으로 사료된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-303
• /
• 2014

Flameless combustion, well known as MILD (Moderate Intensity Low oxygen Dilution) combustion or CDC(Colorless Distributed Combustion), is considered as one of the promising technology for achieving low NOx and CO emissions with improving thermal efficiency of combustion system. In this paper, the effects of exhaust gas dilution rate on formation of flameless combustion of liquid fuel were analyzed using three-dimensional numerical simulations for application of gas turbine combustor with high power density. Results show that the local high temperature region was decreased and flame temperature was spatially uniformly distributed due to higher dilution rate of burnt gas as similar pattern of gas phase flameless combustion. But the evaporation and mixing process of liquid fuel are found to be another important factors for formation of flameless combustion.

• 한국환경과학회지
• /
• 제7권6호
• /
• pp.793-801
• /
• 1998

In this study, the Dilution Method is used to measure river discharge through the hydraulic model test. the dilution method is divided into Constant-Rate-Infection Method and Slug-Injection Method in the river discharge measurement techniques. When the dilution method is applied in the hydraulic model flume, it is analyzed that the estimated error of constant-rate-injection method is less than that of the slug-in-jection method, and the result shows that floodflow analysis is more efficient than lowflow analysis as compared observed discharge with calculated discharge. The result of statistical error analysis shows that the constant-rate-injection method is appropriate technique for the measurement of the river discharge. Therefore, the dilution method among the river discharge measurement techniques can be applied for the river basin which can't be measured with current meter or unsteady-flow regime in the urban-small drainage or hydraulic structure equipment area and can be obtained more exact results than any other discharge measurement techniques.

• Ocean and Polar Research
• /
• 제22권1호
• /
• pp.45-56
• /
• 2000

Hydrodynamic mixing characteristics of submerged effluent discharges into Masan Bay were investigated by both field observations and numerical model simulations. CORMIX model, a length-scale mixing model, was adopted to obtain the near-field dilution and wastefield characteristics of the effluent discharges into Masan Bay. Model predictions of the near-field dilution rates were in a good agreement with field observations in summer and winter seasons. Seasonal variations in the dilution rates showed that the highest dilution rate was obtained in winter while the lowest dilution rate was in summer. As the effluent discharges are increased with the treatment capacity expansion to be completed by 2011, the dilution rates are expected to be much reduced and the near-field stability of the wastefields will become unstable due to the increased effluent discharges.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.173-177
• /
• 1989

HeLa 세포주의 연속 배양시 세포수가 배지의 이동속도가 증가함에 따라 감소하는 현상을 나타냈으며, 최대 세포수를 유지할 때의 dilution rate은 0.012(1/h)로 wash-out인 0.050(1/h)보다 극히 낮으며, dilution rate이 0.030(1/h)일 때 2.0(mL of cells/L/h)의 최대 세포 생산속도를 보였다. 또한 낮은 배지 이동속도에서 세포수의 감소에 따른 maintenance term의 존재를 확인했다. 더불어 packed cell volume파 산소소비속도의 측정값이 실제 세포증식과 밀접한 관계가 있음이 입증되어 간접방법에 의한 생육도치 측정이 가능하게 되었다. 또한 산소 yield model에 의해 최대 산소 수율, $Y_{O2}^{max}$과 maintenance 산소소비속도, m$_{O2}$가 각각 4.1$\times$$10^5$(cells/mmole $O_2$)와 10.71$\times$$10^{-9}$(mmole $O_2$/ cells/h)로 측정되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.263-266
• /
• 2012

The characteristics of mild combustion and pollutant emission were investigated computationally with supplied air stream temperature and dilution rate in jet flame. The air was diluted with main combustion products. As dilution rate increased at fixed air temperature, the temperature distribution of burner inside was uniformed and the maximum mole fraction of CO and NO was decreased. In addition, emission indices for NO, CO, and $CO_2$ were compared with air temperature and dilution rate.

• Journal of Welding and Joining
• /
• 제32권6호
• /
• pp.14-21
• /
• 2014

High-temperature corrosion resistance of martensitic-hardfaced weldment is generally evaluated by the Cr content depending on dilution rate. Present study used a commercial program(SYSWELD) applying three-dimensional heat flow analysis to predict temperature distribution of weld. Configuration of weld bead can be determined by the contour of melting temperature and simultaneously dilution rate is calculated to predict Cr content. Experimental study also has been conducted to measure Cr content of harfaced surface welded by FCAW. Results indicated that computational results were well matched with those obtained from experiments.