An, Hong;Park, Jaechan;Kang, Dong-Hun;Son, Wonsoo;Lee, Young-Sup;Kwak, Youngseok;Ohk, Boram
Journal of Korean Neurosurgical Society
/
제62권5호
/
pp.526-535
/
2019
Objective : While the risk of aneurysmal rebleeding induced by catheter cerebral angiography is a serious concern and can delay angiography for a few hours after a subarachnoid hemorrhage (SAH), current angiographic technology and techniques have been much improved. Therefore, this study investigated the risk of aneurysmal rebleeding when using a recent angiographic technique immediately after SAH. Methods : Patients with acute SAH underwent immediate catheter angiography on admission. A four-vessel examination was conducted using a biplane digital subtraction angiography (DSA) system that applied a low injection rate and small volume of a diluted contrast, along with appropriate control of hypertension. Intra-angiographic aneurysmal rebleeding was diagnosed in cases of extravasation of the contrast medium during angiography or increased intracranial bleeding evident in flat-panel detector computed tomography scans. Results : In-hospital recurrent hemorrhages before definitive treatment to obliterate the ruptured aneurysm occurred in 11 of 266 patients (4.1%). Following a univariate analysis, a multivariate analysis using a logistic regression analysis revealed that modified Fisher grade 4 was a statistically significant risk factor for an in-hospital recurrent hemorrhage (p=0.032). Cerebral angiography after SAH was performed on 88 patients ${\leq}3$ hours, 74 patients between 3-6 hours, and 104 patients >6 hours. None of the time intervals showed any cases of intra-angiographic rebleeding. Moreover, even though the DSA ${\leq}3$ hours group included more patients with a poor clinical grade and modified Fisher grade 4, no case of aneurysmal rebleeding occurred during erebral angiography. Conclusion : Despite the high risk of aneurysmal rebleeding within a few hours after SAH, emergency cerebral angiography after SAH can be acceptable without increasing the risk of intra-angiographic rebleeding when using current angiographic techniques and equipment.
Recently, research on experimental and analytical techniques utilizing microfluidic devices has been pursued. For example, lab-on-a-chip devices that integrate micro-devices onto a single chip for processing small sample quantities have gained significant attention. However, during sample preparation, unnecessary gases can be introduced into the internal channels, thus, impeding device flow and compromising specific function efficiency, including that of analysis and separation. Several methods have been proposed to mitigate this issue, however, many involve cumbersome procedures or suffer from complexities owing to intricate structures. Recently, some approaches have been introduced that utilize hydrophobic device structures to remove gases within channels. In such cases, the permeability of gases passing through the structure becomes a crucial performance factor. In this study, a method involving the deposition and sintering of diluted Ag-ink onto a silicon wafer surface is presented. This is followed by unstructured nano-pattern creation using a Metal Assisted Chemical Etching (MACE) process, which yields a nanostructured surface with unstructured pillar shapes. Subsequently, gas permeability in the spaces formed by these surface structures is investigated. This is achieved by experiments conducted to incorporate a pressure chamber and measure gas permeability. Trends are subsequently analyzed by comparing the results with existing theories. Finally, it can be confirmed that the significance of this study primarily lies in its capability to effectively evaluate gas permeability through unstructured pillar-like nanostructures, thus, providing quantitative values for the appropriate driving pressure and expected gas removal time in practical device operation.
Purpose: Prolactin in the blood is separated into three types, and over 90% of prolactin presents as a double monomer (23 KDa). Rarely, it can exist in the size of big prolactin (150 KDa), which is called macroprolactin and is known as an autoantibody complex. When macroprolactin accounts for more than 60% of prolactin in the blood, it is called macroprolactinemia. The presence of such macroprolactin was first reported in a patient with hyperprolactinemia but without typical symptoms. Macroprolactinemia is emerging as an important cause of idiopathic hyperprolactinemia. The polyethylene glycol (PEG) precipitation method using the property of precipitating large-molecular-weight proteins is simple and recently has been widely used as a screening test. The results are in good agreement with the results of gel chromatography. The purpose of this study was to confirm the measurement method and reference value verification of monomeric prolactin in blood prolactin using the PEG precipitation method. Materials and Methods: For 40 examinees who visited the Gangnam Center of Seoul National University Hospital in 2021, the prolactin level was verified using radioimmunoassay (RIA). For macroprolactinemia PEG precipitation method, 25% PEG (molecular weight 6000kDa) solution and serum were mixed in equal amounts in a test tube, then left at room temperature for 20 minutes and centrifuged at 4℃ for 30 minutes (1500g). The prolactin level was measured in the supernatant. Results : After confirming that more than 90% of the 40 tested samples within the reference range <25 ng/mL, the same value as the reference value for prolactin was applied. Since the concentration of monomeric prolactin in serum from which macroprolactin has been removed from blood is diluted 1:1 with PEG, our laboratory is currently reporting the result by multiplying the result by a dilution factor of 2. Conclusion: Radioimmunoassay using PEG precipitation method using the property of precipitating large molecular weight proteins is simple and effective for quantitative measurement of monomeric prolactin in blood prolactin.
세라믹스 분야, 전자요업 분야 등에서 폭넓게 사용되고 있는 티탄산바륨 소재에 대하여 신속하고 정확하게 분석할 수 있는 X-선 형광분석용 표준물질 12종을 제작하였다. 특히 매질효과 제거, 보관성, 균질성 등을 고려하면서 융제 ($Li_2B_4O_7+LiBO_2$)로 시료를 16배 희석하여 제작 하였다. 티타늄을 비롯한 몇 원소는 매트릭스의 영향을 받는 것으로 보여 실험 계수법을 사용하고 Lucas Tooth와 Price의 식을 이용해 매트릭스의 영향을 보정해 주었다. 세 곳의 분석기관에서 X-선 형광분광기로 12개의 표준물질에 포함된 15 원소에 대하여 검정곡선을 작성해 본 결과 BaO, PbO, SrO, $Fe_2O_3$, $La_2O_3$, $SnO_2$, ZnO, $ZrO_2$, CaO들은 correlation factor가 0.995를 넘는 아주 좋은 곡선을 얻었다. $SiO_2$와 $Al_2O_3$는 X-선 형광세기도 약하고 correlation factor가 낮은 검정 곡선을 보였다.
본 연구는 EGF와 anti-EGF가 초기 생쥐배아의 발생 및 부화에 미치는 영향을 알아보고자 실행되었다. 초기 2세포기부터 상실배까지의 배아를 EGF와 anti-EGF를 각각 처리한 Ham's F10 배양액에서 배양하여 그 발생률과 부화율을 대조군과 비교하였다. EGF 처리시 배양시간에 따른 발생률은 증진되었으나 통계학적 유의성은 없었다. EGF 처리군에서의 부화율(57.5, 62.5, 65.0, 62.5%)은 대조군(35%)에 비하여 유의하게 (p<0.01) 높았다. Anti-EGF 처리시 각 발생시기별 1:1000 실험군의 발생률은 대조군과 차이가 없었다. 그러나, 1:100 실험군의 경우, 2∼4세포기의 배아는 모두 4∼8세포기에서 정지되었고, 8세포기와 상실배의 포배형성은 48시간 이상 지연되었으며 부화 역시 대조군에 비해 억제되었다(8세포기; 2%, 44%, 상실배; 6.2%, 58.3%). 이 실험에서, EGF는 생쥐 배아의 포배형성과 부화를 증진시키는 반면, anti-EGF는 이를 억제하였다. Anti-EGF 처리시 나타나는 발생정지 현상은 anti-EGF가 배아에서 만들어지는 EGF와 반응하여 EGF의 작용을 억제시키기 때문으로 사료된다. 그러므로 EGF는 paracrine mode로서 뿐만 아니라 antocrine mode로서 생쥐 초기배아의 발생에 중요한 인자로 작용함을 알 수 있었다.
Gang, Myeng Gil;Shin, Seung Wook;Lee, Jeong Yong;Kim, Jin Hyeok
한국진공학회:학술대회논문집
/
한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
/
pp.97-97
/
2013
Recently, Cu2ZnSn(S,Se)4 (CZTSS), which is one of the In- and Ga- free absorber materials, has been attracted considerable attention as a new candidate for use as an absorber material in thin film solar cells. The CZTSS-based absorber material has outstanding characteristics such as band gap energy of 1.0 eV to 1.5 eV, high absorption coefficient on the order of 104 cm-1, and high theoretical conversion efficiency of 32.2% in thin film solar cells. Despite these promising characteristics, research into CZTSS based thin film solar cells is still incomprehensive and related reports are quite few compared to those for CIGS thin film solar cells, which show high efficiency of over 20%. I will briefly overview the recent technological development of CZTSS thin film solar cells and then introduce our research results mainly related to sputter based process. CZTSS thin film solar cells are prepared by sulfurization of stacked both metallic and sulfide precursors. Sulfurization process was performed in both furnace annealing system and rapid thermal processing system using S powder as well as 5% diluted H2S gas source at various annealing temperatures ranging from $520^{\circ}C$ to $580^{\circ}C$. Structural, optical, microstructural, and electrical properties of absorber layers were characterized using XRD, SEM, TEM, UV-Vis spectroscopy, Hall-measurement, TRPL, etc. The effects of processing parameters, such as composition ratio, sulfurization pressure, and sulfurization temperature on the properties of CZTSS absorber layers will be discussed in detail. CZTSS thin film solar cell fabricated using metallic precursors shows maximum cell efficiency of 6.9% with Jsc of 25.2 mA/cm2, Voc of 469 mV, and fill factor of 59.1% and CZTS thin film solar cell using sulfide precursors shows that of 4.5% with Jsc of 19.8 mA/cm2, Voc of 492 mV, and fill factor of 46.2%. In addition, other research activities in our lab related to the formation of CZTS absorber layers using solution based processes such as electro-deposition, chemical solution deposition, nano-particle formation will be introduced briefly.
1. Diluted chicken semen can be preserved at 2 to 5$^{\circ}C$ for 24 to 48 hr with resultant fertility of greater than 90% of that of fresh semen. Turkey semen can be preserved at 10 to 15$^{\circ}C$ for 6 to 24 hr and provide economical fertility. 2. Frozen chicken semen has given variable results; a 21 to 93% fertility ranges as compared to 92 to 94% expected with fresh semen. Highest fertility levels obtained with frozen turkey semen intravaginally inseminated have been 61 and 63% using DMSO and glycerol, respectively, as cryoprotectants. 3. The use of glycerol as a cryoprotectant reauires that its concentration in semen be reduced to less than 2% either by dialysis or centrifugation after thawing and before intravaginal insemination if optimal fertility is to be obtained. 4. The temperature at which cryoprotectants are added to semen and the time allowed for equilibration are important for subsequent fertility pre- and post-freezing. 5. The type of container used for packaging the semen, freeze or cooling rates, thaw rates and level of cryoprotectant all interact in affecting cell survival. 6. Plastic freeze straws as a packaging device for semen offers the following advantages: easy to handle, require minimal storage space, offer a wide range of freeze and thaw rates, and insemination can be made directly from them upon thawing. 7. Controlled slow cooling rates of 1 to 8$^{\circ}C$/min have thus far provided the best results for cooling chicken semen throught the transition phase change (liquid to solid) or critical temperature range of +5 to -20 or -35$^{\circ}C$. 8. Highest fertilities have been achieved with frozen chicken semen where a slow thaw rate (2。 to 5$^{\circ}C$) has been used regardless of the freeze rate. 9. To maintain a constant high level of fertility throughout a breeding season with frozen semen, a higher absolute number of spermatozoa must be inseminated (2 to 3 times as many) as compared to fresh semen since a, pp.oximately 50% are destroyed during processing and freezing. 10. The quality of semen may vary with season and age of the male. Such changes in sperm quality could be accentuated by storage effects. Thus, the correct number of spermatozoa may very well vary during the course of a breeding period. 11. As to time of insemination, it is best to avoid inseminating chicken hens within 1-2 hr after or 3-5 hr before oviposition; and turkey hens during or 7-10 hr before oviposition. 12. The physiological receptiveness of the oviduct at the time of insemination is a very important biological factor influencing fertility levels throughout the breeding season.
This study was performed to determine effects of the supplementation of Kimchi lactic acid bacterial culture in extruded pellets (EP) on the growth, body composition, blood chemistry and immune response of olive flounder Paralichthys olivaceus. Four hundred eighty individuals averaging 16.1 g were randomly distributed into 12, 180 L flow-through tanks (forty fish per tank). Four concentrations of Kimchi lactic acid bacterial culture (KL) were prepared: Control (0%), 0.1%, 0.2% and 0.5%. Three concentrations (0.1%, 0.2% and 0.5%) of Kimchi lactic acid bacterial culture were each diluted to 10% of EP weight and then fully absorbed by EP for 10 minutes. Each diet was fed to triplicate groups of fish. Fish were hand-fed to apparent satiation twice a day for 8 weeks. At the end of the 8-week feeding trial, the plasma lysozyme and bacterial activities of fish were determined. In addition, the cumulative mortality of fish was monitored for 8 days after their artificial infection with Edwardsiella tarda. The weight gain, specific growth rate, feed efficiency ratio, protein efficiency ratio, protein retention, hepatosomatic index and condition factor of fish were not affected by dietary supplementation with KL. None of the proximate composition, plasma parameters, lysozyme or bactericidal activities of fish was affected by dietary supplementation with KL. However, the cumulative mortalities of fish fed EP containing 0.1% and 0.5% Kimchi lactic acid bacterial culture were relatively low compared to that of fish fed the control diet. In conclusion, dietary supplementation with KL did not effectively improve growth, feed utilization, body composition, plasma chemistry, lysozyme, bactericidal activities or immune response of olive flounder after E. tarda infection under these experimental conditions.
The newly developed diagnostic method with application of $^{113}Sn-^{113m}In$ cow system ($^{113}Sn:\;T\frac{1}{2}$ 118 days, $^{113m}In:\;T\frac{1}{2}$ 1.7 hrs, 390 Kev, Single ${\gamma}$) has the remarkable advantages such as increased diagnostic ability by single large dose administration of $^{113m}In$ with no subsequent radiation hazard and shortened examining time. We reformed the research of following scope with the use of developed $^{113}Sn-^{113m}In$ cow (25 mCi) generator: The sizes of particles produced under various conditions were investigated, and possibility for application to the scannings of various organs such as brain, liver, lung, bone marrow and blood pool etc. were studied. Results: $^{113m}InCl_3$ solution eluted from diluted HCl solution (pH 1.5) passed through $^{113}Sn-^{113m}In$ generator, and there can be produced various sized particles of colloidal indium. And there observed the state of distribution of $^{113m}In$ in each organ which showed many differences according to the particle sizes of colloidal indium. The results are stated as follows: 1. The adjustment of pH is the most important factor in making the desirable particle size of colloidal indium. The colloid for blood pool showed the highest level as 7.1%/gm blood, at pH 1.7, the colloid of pH 3.5 for liver scanning showed the highest level, 88.4%, in the liver, the colloid pH 6 showed the highest level, 3.1%, in the spleen, and the colloid of pH 11.0 showed the highest level, 85.3%/gm, in the lung. 2. The colloid for liver scanning made with NaCl-NaOH system showed the highest liver uptake at pH 7.2, and at either higher or lower pH than 7.2 showed decrease of liver uptake more or less. 3. The activity of $^{113m}In$ eluted through $^{113}Sn-^{113m}In$ generator indicated over 90% in the initial 4 ml, and particularly 88.1%-86.0% in the initial 2 ml. 4. The incubation time, tempertaure and mechanical irritation related to colloid formation and coating of colloid were not the definite condition of influence.
임상 실험실에서의 망상 적혈구 계산은 현재 수동 및 자동으로 구분된다. 현미경에 의한 망상 적혈구 수 검사는 정확성의 결여, 낮은 재현성 등이 망상 적혈구 결과의 정확성에 문제가 있다. 또한, 자동 혈액 분석기의 유동 세포 계측법은 개발 도상국 및 소규모 실험실에서 비용 때문에 사용하기가 어렵다. 따라서 본 연구는 이러한 단점을 보완 할 수 있는 새로운 방법을 찾기 위해 노력했다. 이 연구의 목적은 분광 광도계로 염색 된 망상 적혈구 수를 비교하고 또한 분광 광도계 및 유동 세포 계측기의 통계를 분석하는 것이다. 동일한 8 개의 EDTA 샘플을 36 회 반복하여 분광 광도계와 유동 세포 계측기 사이의 일치도를 비교 하였다. 이 연구는 700~780 nm에서 600 배 희석 한 표본을 10 개의 차이로 측정하였다. 흡광도에 의한 710~730 파장은 표준 및 검사와 양의 상관 관계가 있으며(r=0.967, p<0.01), 변수에 대한 상관 관계를 나타내었다. 결과에 대한 회귀 분석결과 최적 희석 계수는 600 배였다. 따라서 본 연구는 자동 분광 광도계를 이용한 망상 적혈구 흡광도 측정에 대한 경제적인 기여 그리고 망상 적혈구 관련 빈혈에 대한 모니터링 시스템 등에 기여 할 수 있는 기술적 활용을 시도한 것이다. 따라서 더욱 광범위한 연구가 필요할 것으로 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.