• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2008

The forest soil sediment disasters occurred in Jinbu-myeon Pyeongchang county were investigated characteristics by the aerial photograph analysis. After digitizing from aerial photographs, forest soil sediment disaster sites were classified into 695 collapsed sites, 305 flowed sites and 199 sediment sites. DEM (Digital Elevation Model) were generated from 1 : 5,000 digital topographic map. Factors of geography, hydrology, biology, and geology were analyzed using DEM, geologic map, and forest stand map with aerial photographs by GIS spatial analysis technique. The forest soil sediment disasters were mainly occurred from southeastern slope to southwestern slope. In collapsed sit es, the average slope degree is $28.9^{\circ}$, the average flow length is 163.5m, the average area of drainage basin is 897$m^2$. In case of flowed sites, the average slope degree, flow length, the area of drainage basin and confluence order is $27.0^{\circ}$, 175m, 2,500$m^2$ and 1, respectively. In sediment sites, the average slope, flow length, the area of drainage basin and confluence order is $12.5^{\circ}$, 2,50m, 25,000$m^2$ and 4, respectively. Also the forest soil sediment disasters were occurred most of collapsed sites in the afforest land after felling and igneous rocks composed of granite.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.78-84
• /
• 2000

The aim of this study was to compare shaping ability of nickel-titanium rotary files with different taper in simulated resin canals. The instruments used in this study were GT with .04 taper ProFile with ISO-sized tip, .04 taper ProFile with ISO-sized tip alone, and .02 taper Naviflex file and all canals were prepared by crown-down technique. A total of 30 composite images were made from pre- and post-canal scanned images using Scanjet 4C scanner and Corel photopaint 8.0 and then, prevalence of canal aberrations was measured. The amount of coronal substance the instruments removed was also calculated two-dimensionally on digitized images with the Brain C software to compare the relative enlarging efficiency. Finally, the prepared internal canal form was evaluated three-dimensionally with impression technique. The results were as follows; 1. The incidence of zipping in Naviflex group was significantly high compared to the other two groups(P<.05). 2. The amount of coronal substance the GT combined group removed was significantly larger than the other two groups(P<.05). 3. The GT combined group produced canals with good taper and flow. Under the conditionas of this study, the combined use of larger tapered nickel-titanium rotary files prepared simulated canals safely, efficiently and with good three-dimensional form.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.105-115
• /
• 2005

This study was investigated the kinematic factors of the last approach strides and. take off motion for the skill improving of BKH elite male athlete. 'The subjects chosen for the study were BKH and. KASZCZYK Emillian male athletes who were participated in 2003 Dae-Gu Universiad Games. Three high speed video cameras set in 60frames/s setting were used. for recording from the last approach strides to the apex position. After digitizing motion, the Direct Linear Transformation(DLT) technique was employed to obtain 3-D position coordinates, The kinematic factors of the distance, velocity and angle variable were calculated for Kwon3D 3.1. The following conclusions were drawn; 1. It showed longer stride length, as well as faster horizontal and lateral velocity than the success trial during the approach phase. For consistent of the approach rhythm, it appeared that the subject should a short length for obtain the breaking force by the lower COG during the approach phase. 2. The body lean angle showed a small angle by a high COG during the take-off phase. For obtain the vertical displacement of the COG and a enough space form the bar after take-off, it appeared that the subject should increase the body lean angle. 3. For obtain the vertical force during the takeoff phase, it appeared that the subject should keep straight as possible the knee joint. Therefor, the subject can be obtain a enough breaking force at the approach landing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.781-781
• /
• 2012

본 연구에서는 수문-수질 모의가 가능한 SWAT (Soil and Water Assessment Tool) 모형을 이용하여 경안천 상류의 별미천 유역($1.21km^2$)을 대상으로 최적관리기법(Best Management Practice, BMP) 적용에 따른 비점오염원 저감효과를 분석하고자 한다. 이를 위해, 별미천 유역내 논($0.049km^2$)과 밭($0.018km^2$) 지역에 대한 BMP 시나리오를 작성하였다. 먼저, 논에서는 계단식(Terrace) 재배 방법을 적용하였으며, 밭에서는 등고선(Contour farming) 재배 방법과 볏짚지표피복 시나리오를 적용하였다. 여기서, 볏짚지표피복 시나리오는 현재 $1276.6m^2$, 경사도 약 3.2%의 콩 재배가 이루어지고 있는 시험포장에서 수행된 결과를 이용하여 SWAT 모형의 지표유출관련 매개 변수를 조정하였다. SWAT 모형의 적용성 평가를 위해, 1:5,000 수치지도로부터 2m DEM(Digital Elevation Model) 및 QuickBird(2006.05.01) 위성영상으로부터 스크린 디지타이징기법(On-Screen Digitizing Method)을 이용하여 총 21개 토지이용항목의 1:5,000급 정밀토지이용도를 작성하고, 농촌진흥청에서 제공하는 1:25,000 정밀토양도를 구축하였다. 또한, 유역출구점에서 자동수위 및 강우량 계측기, 수질측정을 위한 오토샘플러를 설치하여 시간당 수위(유량), 강우 자료와 강우발생에 따른 수질자료(Sediment, Total Nitrogen, Total Phosphorus)를 이용하여 모형의 검보정(2011.06.08 ~ 2011.10.31)을 실시하였다. 모형의 검보정 후, 논에서의 Terrace 및 밭에서의 Contour farming, 밭 시험포장에서의 저감효과가 분석된 지표피복시나리오의 적용을 위한 SWAT 모형의 관련 매개변수를 정의하고, 각 BMP 시나리오별 비점오염원 저감효과를 분석하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.233-243
• /
• 1999

In this study, sample sites are chosen where digitalized cadastral maps are available, and boundaries of forestry, farming lands, and residence are clearly distinguishable. Digital orthophotos, produced from aerial photographs, are overlaid with digitalized cadastral maps to grope for applications of digital orthophoto in cadastre. The conclusions and applicable fields of this study are as follows. The first. digital orthophoto is applicable to solve problems such as discordance and duplication of boundary produced in the process of digitizing cadastral maps. The second, using digital orthophoto, it is possible to extract regions where a trouble of ownership would exist and so the necessity of cadastral resurveying can be brought. The third, by overlaying digital orthophoto and cadastral map, it can be used effectively for the present situation maintenance of buildings. The fourth, because it is possible to examine current land use of each lot, digital orthophoto may contribute to decide the validity of land category on cadastral map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.313-321
• /
• 2002

Supplying high-resolution satellite image, we take much interest in the update and the revision of digital map and thematic map based on the satellite image. This study presented the possibility of the update and the revision to the existing digital map on a scale of l/5,000 and 1/25,000 to take advantage of the IKONOS satellite image. We performed geometric correction to make use of the ground control points of the existing digital map in IKONOS mono-image and created ortho-image by extracting digital elevation model from three dimensional contour data and altitude on the existing digital map. We revised changed features in the method of screen digitizing by overlapping orthorectified satellite image and existing digital map and flawed features of the unchanged area on the satellite images for positional accuracy analysis. As a result, rectification error is calculated at $\pm$3.35m by RMSE. There is a good possibility of update of digital map under the scale of 1/10,000. It is possible to the update of the large scale digital map over the scale of l/5,000, as if we used the method of stereo image and ground control point surveying.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.117-124
• /
• 2008

This paper introduces a novel approach for automated mapping of a map feature that is vinyl green house in high spatial resolution imagery Some map features have their unique spatial patterns. These patterns are normally detected in high spatial resolution remotely sensed data by human recognition system. When spatial patterns can be applied to map feature identification, it will improve image classification accuracy and will be contributed a lot to feature identification. In this study, an automated feature identification approach using spatial aucorrelation is developed, specifically for the vinyl green house that has distinctive spatial pattern in its array. The algorithm aimed to develop the method without any human intervention such as digitizing. The method can investigate the characteristics of repeated spatial pattern of vinyl green house. The repeated spatial pattern comes from the orderly array of vinyl green house. For this, object-based approaches are essential because the pattern is recognized when the shapes that are consists of the groups of pixels are involved. The experimental result shows very effective vinyl house extraction. The targeted three vinyl green houses were exactly identified in the IKONOS image for a part of Jeju area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.114-128
• /
• 2019

This study is a spatial analysis of the boundaries related to the division of the Korean peninsula. The boundary space was extracted by extracting $38^{th}$ parallel and digitizing the map of the Armistice Agreement Annex. The purpose of this analysis was to extract more accurate scope based on the armistice agreement, the appendices, and the UNC regulations and to analyze the wrong information correctly. The range of demilitarized zones was determined by UNC 551-4(2014) and UNC 551-5(2015) to ensure that there is no change in the location of the Southern Limit Line. It also confirmed that the MACHA was excluded in the DMZ. As a result, the area of the DMZ was measured at $889.7km^2$. Also this study identified the interval and number of markers in the MDL and the Han River estuary. It could be confirmed that the interval of markers within the MDL depends on the subject of management. This study is more accurate from the start and can be used as basic data needed in the study and education of DMZ and border areas after verification by public organizations.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.947-953
• /
• 2019

The purpose of this paper is to explore an ASIC design for estimating sizes and concentrations of airborne micro-particles by the means of integrating, amplifying and digitizing electric charge signals generated by photo-sensors as it receives scattered photons by the presence of micro-particles, consisting of a pre-amplifier that detects and amplifies voltage or current signal from photo-sensor that generates charges (hole-electron pairs) when exposed to visible rays, infrared rays, ultraviolet rays, etc. according to the intensity of rays; a shaper for shaping the amplified signal to a semi-gaussian waveform; two discriminators and binary counters for outputting digital signals by comparing the magnitude of the shaped signal with an arbitrary reference voltages. The ASIC with the proposed architecture and functional blocks in this study was designed with a 0.18um standard CMOS technology from Global Foundries and the operation and performances of the ASIC has been verified by the silicons fabricated by using the process.

• Food Science and Industry
• /
• v.54 no.3
• /
• pp.184-195
• /
• 2021

Smart HACCP is a system that can check the monitoring of critical control point (CCP) in real time to implement improvement measures immediately after departure from limit criteria and prevent falsification of data by digitizing handwritten records. In this study, we developed the analysis model for the effectiveness ofsmart HACCP to compare and analyze with existing HACCP. By introducing of smart HACCP system, the evaluation index value of HACCP effectiveness for HACCP-certificated companies on a small scale increased by 9.25 points, corresponding to 11.52% of increase rate. General HACCP-certificated companies showed 4.52 point and 5.00% of increase rate by introducing of smart HACCP system. Thus, it was confirmed that the introduction of smart HACCP system contributes to the improvement of food safety management and especially it would be more effective for HACCP-certificated companies on a small scale than general HACCP-certificated companies.