• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.361-365
• /
• 2000

Sheet를 이용한 주관적 평가 방법은 자극제시 후 과거의 자극에 대한 감성을 상황을 기억하여 평가하는 것으로 자극제시 순간의 감성을 정확히 대변한다고는 보기 어렵다. 본 논문에서는 디지타이저를 이용한 실시간 주관적 감성평가 시스템의 개발에 대하여 논의하였다. 본 시스템은 입력 부분, 감성평가 및 디스플레이 부분의 2부분으로 구성되어 있다. 입력 부분은 A4 size의 펜마우스 입력 방식을 가진 디지타이저를 이용하여 피험자가 직접 자신의 감성을 실시간으로 입력하게 하였고, 괘/불쾌, 긴장/이완의 2차원 감성 평가가 실시간으로 가능하도록 하였다. 감성평가 및 디스플레이부분은 1차원적인 감성 측정 결과와 2차원적인 감성 측정 결과를 모두 실시간으로 제시할 수 있도록 하였다. 특히 본 논문에서는 피험자가 편하고 쉽게 자신의 감성을 표현할 수 있는 입력 board 선택에 관한 연구를 수행하였다. 피험자가 자신의 감성을 정확히 인식하였다고 가정을 하고, 여러 가지 입력 board들을 피험자에게 제시했을 때 가장 빠르고 정확하게 자신의 감성을 표현할 수 있는 입력 board를 선택하였고 향후 감성 평가 연구에 적용하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.291-297
• /
• 1998

In order to accomplish the digital map production I/O devices should be used which are used for data input procedure to convert original paper map(hardcopy) data into computer compatible digital map data, and for the mapsheet output procedure of worked out data. For the input device, digitizer and scanner are most frequently used. Digitizer has possibility of direct production of digital data, and are mainly used for input procedure of partly plotted source map. In contrary, scanner is rather easy to operate the instrument, so that is widely used for the input procedure of original sheet map. In this study, to extract the input device characteristics, some kinds of digitizers and scanners were cheesed and used for the positional error analysis through the operational method and types of instruments. Also for the output device characteristics, some kinds of plotter and materials are used and compared to analyze the positional error through the instrumental types and output sheet materials.

• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.30-41
• /
• 1987

The geometrical shape of a plow bottom may be the most important factor affecting the performance of a plow for a given soil and operating conditions. There are various designs of the Jaenggi (Korean plow) available commercially, which may be different from each other and from the plow (Western plow) in respect to the shape and performance. This study was intended to investigate the geometrical characteristics of Jaenggi. The coordinate digitizer equipped with 3 potentiometers was designed and manufactured for measurement of the shape of curved plane of moldboard and share. The digitizer was connected to a microcomputer having the data acquisition system. This device was used to analyze the plow bottoms of 5 differently-made Jaenggis and one cylindrical plow. The results of the study are summarized as follows: 1. It was possible to measure easily and quickly the curved plane of plow bottom and to plot the view on three major plans using the coordinate digitizer electrically connected to a microcomputer system. 2. The shape of five Jaenggi bottoms analyzed could be characterized by the cutting angle having the range of $33-42^{\circ}$, the maximum share-lift angle of $41-50^{\circ}$, and the setting angle of moldboard wing of $46-70^{\circ}$. The most critical difference of the shape factors between the Jaenggi and the plow was found in the maximum share-lift angle, the former was more than twice as much as the latter. 3. The analysis of the shape of Jaenggi bottoms showed that the share projections on 3 major plans had a varied triangle, which was quite different from that of plow bottom. Especially, it was analyzed that the shape of furrow slice for the Jaenggi had a skewed rectangle, leaving a considerable height of the ridge at the furrow bottom. 4. The dihedral angle was similar range of $30-85^{\circ}$ for the all bodies investigated, but the directional angle was somewhat different from each other. The difference in directional angle was $5^{\circ}$ for the plow, $20^{\circ}$ for the Jaenggi A and $30^{\circ}$ for the Jaenggi B. 5. Area of the spherical representation region was 0.0328 for the plow, 0.1194 for the Jaenggi A and 0.1716 for the Jaenggi B. This may indicate that the plow came close to a working surface and the Jaenggi A and the Jaenggi B departed from a working surface to a somewhat greater extent.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.316-327
• /
• 2009

A standard for national seismological observatory was proposed on 1999. Since then, Quanterra digitizer has been installed and is operating on almost all of seismic stations which belong to major seismic monitoring organizations. Quanterra digitizer produce and transmit real-time event packet and data packet. Characteristics of event packet and arrival time of each channel's data packet on data center were investigated. Packet selection criteria using signal to noise ratio (hereafter SNR) and signal period from real-time event packet based on 100 samples per second (hereafter sps) velocity data were developed. Estimation of epicenter using time information of the selected event packet were performed and tested. A series of experiment show that event packets were received approximately 3~4 second earlier than data packets and the number of event packet was only 0.3% compare to data packets. Just about 5% against all of event packets were selected as event packet were related P wave of real earthquake. Using the selected event packets we can estimate an epicenter with misfit less than 10 km within 20 sec for local earthquake over magnitude 2.5.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.215-218
• /
• 2000

This paper describes a new algorithm for segmenting continuous handwritten signatures sampled by a digitizer. Signatures are segmented by three procedures. The first step is to calculate the pen tip speed. Then the Gabor wavelet is carried out on the acquired data from the first step. Finally, the local minima of the filtered output are selected as segmentation points of the signature. The proposed method is experimented with numerous signatures with various length and complexity.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1405-1408
• /
• 1987

X-ray filmed data converted by Image digitizer were processed through the digital computer for edge detections. Sobel operator with the high-pass and the low-pass filtering of the histogram of the images were applied to this work and 3 examples were processed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.718-721
• /
• 1988

In this paper, we develop 256*256*8 bit real-time image digitizer with the IBM-PC as a image processor. With this developed system, we process a chest X-ray image, which is a medical image, using the adaptive algorithm. In the future, we consider that the application of this developed system is extended in the various fields.

• Journal of KIISE:Software and Applications
• /
• v.29 no.11
• /
• pp.803-808
• /
• 2002

This paper describes automatic methods for detection of kidney and kidney tumor on abdominal CT scans. The abdominal CT images were digitalized using a film digitizer and a gray-level threshold method was used to segment the kidney. Based on texture analysis results, which were perform on sample images of kidney tumors, SEED region of kidney tumor was selected as result of homogeneity test. The average and standard deviation, which are representative statistical moments, were used to as an acceptance criteria for homogeneous test. Region growing method was used to segment the kidney tumor from the center pixel of selected SEED region using a gray-level value as an acceptance criteria for homogeneity test. These method were applied to 113 images of 9 cases, which were scanned by GE Hispeed Advantage CT scanner and digitalized by Lumisvs LS-40 film digitizer. The sensitivity was 85% and there was no false-positive results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.70-79
• /
• 2020

The main objective of this research to develop an IoT based wireless contactless ultrasonic system (ICUS) and its application to concrete structure. The developed system consists of 16 mems, 2Mhz digitizer, amplifying circuit, FPGA, and wifi module, enabling to measure leaky surface waves from concrete specimens without physical coupling process and wires. Multi-channel analysis is performed to improve the accuracy of data analysis, and the velocity of leaky surface waves and acoustics are derived. Field inspection of railroad concrete sleepers is conducted to evaluate the performance of the system and to compare the results with conventional ultrasonic pulse velocity (UPV). As a result of the field inspection, UPV was limited to evaluate damages. This is because crack pattern of railroad sleepers is parallel to ultrasonic ray path and accessibility of the railroad at the field is disadvantageous to contact-based UPV. On the other hand, ICUS possibly detect the damages as reduction of dynamic modulus by up to 59% compared to non-damaged specimen.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.641-646
• /
• 2004

As the use of signatures for identification purposes is pervasive in society and has a long history in business, dynamic signature verification (DSV) could be an answer to authenticating a document signed electronically and establishing the identity of that document in a dispute. DSV has the advantage in that traits of the signature can be collected on a digitizer. The research question of this paper is to understand how the individual variables vary across devices. In applied applications, this is important because if the signature variables change across the digitizers this will impact performance and the ability to use those variable. Understanding which traits are consistent across devices will aid dynamic signature algorithm designers to create more robust algorithms.