• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.209-215
• /
• 2010

In an asymmetrical speed channel environment like asymmetric digital subscriber line, the up-link bandwidth is normally smaller than the down-link bandwidth, which will lead to extremely low utilization of down-link bandwidth when current P2P video transmission is applied. To overcome this, a new fast P2P video transmission method applied in an asymmetrical speed channel environment is proposed in this paper. On the basis of the many-to-one concept, the proposed method uses a new multipeer aggregation technique to enhance the utilization of down-link bandwidth. In addition, an adaptive peer assignment algorithm is also introduced in order to minimize the overall transmission time. Experimental results show that by using our proposed method, the utilization of down-link bandwidth is significantly improved, and the overall transmission time is greatly reduced.

• ETRI Journal
• /
• v.26 no.2
• /
• pp.92-100
• /
• 2004

In this paper, we propose an efficient method to broadcast digital television signals using single frequency networks (SFNs) within the Advanced Television Systems Committee (ATSC) transmission systems. In implementing the SFNs of an 8-vestigial side band (8-VSB) Digital Television (DTV) system, the ambiguity problem of the trellis coder is unavoidable in a conventional ATSC transmission system. We propose a memory initialization of the trellis coder to resolve this ambiguity problem. Since the proposed scheme to synchronize multiple transmitters minimizes the changes from the conventional ATSC system, the hardware complexity for these changes is very low. Our simulation results show that the proposed scheme makes a less than 0.1 dB degradation at the threshold of visibility with a bit error rate of $3{\times}10^{-6}$ in the additive white Gaussian noise (AWGN) channel. It is possible to reduce the performance degradation by increasing the initialization period of the proposed scheme.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.122-139
• /
• 2015

Though the digital transition of terrestrial TV has been completed, the transmission system for terrestrial radio has not been determined and terrestrial radio still keeps its analog transmission. This study, under coorientation model, aims to explore the cognitive difference in recognizing important factors to be considered in deciding the digital radio transmission system between the employees of terrestrial broadcasters and then crucial issues related to the factors are driven. It has been found that the most big cognitive difference among the employees of three major terrestrial broadcasters lies in selecting frequency band for digital radio transmission. But there was little difference of opinion on simultaneous production-transmission, efficiency of frequency usage, broadcast quality and standards of service. The most disputable point in transition to digital radio broadcasting is selecting the frequency band for digital radio between the frequency bands used for FM radio broadcast (88-108MHz), terrestrial DMB (VHF Ch7~13) and FM radio adjacent broadcast band (76~88MHz: VHF Ch5~6). So, the question concludes into the selection issue between DAB+, HD-Radio, and DRM+. To improve the quality of radio broadcasting service and enhance the satisfaction of listeners, it is desirable to allow to operate both production system and transmission station, to enhance high transmission efficiency with minimum transmission facility, and to permit new entrance of broadcasters.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.50-50
• /
• 2004

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.521-528
• /
• 2013

Recently the increasing numbers of cars and traffic jamming makes air pollution condition more severely. Especially high-density population area, in most big cities like Bejing and Seoul, can lead to lung illness and other diseases. In this study to decrease this kind of air pollution condition, a method of air pollution information transmission is proposed. For the transmission of air pollution and traffic control data, international standard technology, the TPEG is applied.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.148-157
• /
• 1995

This study deals with controlling the speed of Hydrostatic Transmission (HST) system throuth the control of pumping stroke of positive displacement pump using high-speed solenoid valve controlled by digital closed loop PWM method. The method which was done in this study is as follows: First, we modified original positive displacement pump and designed pumping stroke control system of HST by using the high-speed solenoid valve. Second, after experimenting static and dynamic characteristics on each signal flow, we identified system parameter of approximated model. Finally, to control the speed of HST, we controlled the angle of the swash plate of positive displacement pump by controlling the pressure in the control cylinder chamber. Test which was carried out in the laboratory shows that transient and steady state response could be improved by PID controller.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.1
• /
• pp.56-62
• /
• 2007

In this paper, design method for power tower hazard diagnosis/predition system based on UsN was proposed. The proposed method used multi-hybrid sensors to measure rotation, displacement, and inclination state of power tower, and made decision/prediction of hazard of power tower. System design was made with requirement analysis of monitoring for transmission power facility and use of MEMS and optic fiber sensors. For hazard decision, analysis of correlation was made using sensor output. LN based on IEC61850,international standard for digital substation, was also proposed. For transmission facility monitoring, digital substation and power tower were considered as parts of power facility networks.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.495-505
• /
• 2008

This paper presents a parallel processing searcher structure for the initial synchronization of a direct sequence ultra-wideband (DS-UWB) system, which is suitable for the digital implementation of baseband functionalities with a 1.32 Gsample/s chip rate analog-to-digital converter. An initial timing acquisition algorithm and a data demodulation method are also studied. The proposed searcher effectively acquires initial symbol and frame timing during the preamble transmission period. A hardware efficient receiver structure using 24 parallel digital correlators for binary phase-shift keying DS-UWB transmission is presented. The proposed correlator structure operating at 55 MHz is shared for correlation operations in a searcher, a channel estimator, and the demodulator of a RAKE receiver. We also present a pseudo-random noise sequence generated with a primitive polynomial, $1+x^2+x^5$, for packet detection, automatic gain control, and initial timing acquisition. Simulation results show that the performance of the proposed parallel processing searcher employing the presented pseudo-random noise sequence outperforms that employing a preamble sequence in the IEEE 802.15.3a DS-UWB proposal.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.69-77
• /
• 2015

MANET is composed of only the mobile nodes have a limited transmission range. The dynamic topology by the frequent movement of nodes makes routing difficult and is also cause exposed to security vulnerabilities. In this paper, we propose the security routing technique consisted of mechanism of two steps in order to respond effectively to attack by the modification of the routing information and transmit secure data. The hierarchical structure is used and the authentication node that issues the key of the nodes within each cluster is elected in this proposed method. The authentication node manages key issues and issued information for encrypting the routing information from the source node. The reliability value for each node is managed to routing trust table in order to secure data transmission. In the first step, the route discovery is performed using this after the routing information is encrypted using the key issued by the authentication node. In the second step, the average reliability value of the node in the found path is calculated. And the safety of the data transmission is improved after the average reliability value selects the highest path. The improved performance of the proposed method in this paper was confirmed through comparative experiments with CBSR and SEER. It was confirmed a better performance in the transmission delay, the amount of the control packet, and the packet transmission success ratio.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.95-97
• /
• 1988

A method of digital transmission line protection using travelling wave is presented. It is shown that the fault current appears as a difference of two quantities associated with the travelling wave at each terminal. The phasor of these quantities are extracted and transmitted to the other end via communication channel to detect the line fault.