• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.519-528
• /
• 2016

Frequently torrential rain is occurred by climate change and urbanization. Urban is formed with road, residential and underground area. Without detailed topographic flooded analysis consideration can take a result which are wrong flooded depth and flooded area. Especially, flood analysis error of population and assets in dense downtown is causing a big problem for establishments and disaster response of flood measures. It can lead to casualties and property damage. Urban flood analysis is divided into sewer flow analysis and surface inundation analysis. Accuracy is very important point of these analysis. In this study, to confirm the effects of the elevation data precision in the process of flooded analysis were studied using 10m DEM, LiDAR data and 1:1,000 digital map. Study area is Dorim-stream basin in the Darim drainage basin, Sinrim 3 drainage basin, Sinrim 4 drainage basin. Flooding simulation through 2010's heavy rain by using XP-SWMM. Result, from 10m DEM, shows wrong flood depth which is more than 1m. In particular, some of the overflow manhole is not seen occurrence. Accordingly, detailed surface data is very important factor and it should be very careful when using the 10m DEM.

• The Journal of Engineering Geology
• /
• v.9 no.2
• /
• pp.161-176
• /
• 1999

The objectives of this study are to analyze the changes of geo-surface topography in the Siwha embankment and the Ahsan city area by the image processing of Landsat Thematic Mapper data, and to estimate the reclaimed amount of the exposed tidal flat in the Siwha area using the GIS. False color composite, Tasseled cap, NVDI(normalized difference vegetation index), and supervised classification techniques were used to analyze the distribution of sediments and the aspect of topographical variations caused by artificial human actions. The total amount of the exposed tidal flat was estimated on the basis of the database snch as aerial photography, hydrographic chart, geological map, and scheme drawing in the Siwha area. The possible excavation regions for a seawall were predicted analyzing the supervised classification image of Landsat TM data. Tasseled cap images were used to observe the distribution of sediments. The difference of the NDVI images between spring and summer seasons indicates that deciduous and coniferous forests were distributed over the whole areas. The total fill-volume of the exposed Siwha tidal flat and the fill-volume of the construction planning seawall were calculated as $581,485,354\textrm{m}^3{\;}and{\;}3,387,360\textrm{m}^3$, respectively, from the digital terrain analysis. Daebu Island, Sunkam Island, and the part of Songsan-myeon were chosen as the cut area to make the seawall, and their cut-volumes were estimated as $5,229,576\textrm{m}^3,{\;}79,227,072\textrm{m}^3,{\;}and{\;}47,026,008\textrm{m}^3$, respectively. Therefore, the cut-volume of Daebu Island alone among three areas was sufficient to make the seawall.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.11-24
• /
• 2018

The purpose of slope stability analysis is to predict the location and occurrence time considering the rainfall, topographic and soil characteristics, etc. In this study, infinite slope stability analysis considering the time distribution characteristics of the daily maximum rainfall was conducted using a model that combines a digital terrain model and a groundwater flow model. As the results of slope stability analysis, 69.1~70.0% of Fs < 1 cells are in the range of slope angle $20{\sim}50^{\circ}$ and Fs < 1 starts to appear in 2 hours for $Q_1$ model, 5 hours for $Q_2$, 7 hours for $Q_3$ and 6 hours for $Q_4$. Furthermore, the maximum number of Fs < 1 cells appear in 6 hours for $Q_1$ model, 12 hours for $Q_2$, 16 hours for $Q_3$ and 20 hours for $Q_4$, and the area of Fs < 1 is 14.3% for $Q_1$ model, 15.0% for $Q_2$, 15.6% for $Q_3$, and 16.3% for $Q_4$.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.12-21
• /
• 2011

We investigated the location and surveillance system of fortress using inter-visibility analysis between fortress and the capital of the Silla Dynasty. The digital terrain model(DTM) was generated with $10{\times}10m$ grid in Arcview 3.2. Then three fortresses lines(Myeonghwal-sanseong, Namsan-shinseong, Seohyeong-sanseong) were superimposed on the DTM. 4 results of this study were drew out from the cumulative visibility analysis. First, the most of fortress lines which showed the high visible frequency from the Sila-Capital(538 viewpoints) have a good aspect toward the capital. It means that 3 fortresses secured the visibility to the capital. Second, the cumulative visibility analysis from 3 fortresses generated evenly distributed visible frequency across the inside of fortress. It shows that the inner area of fortress is more advantageous to command during the war. On the contrary, a number of invisible(vulnerable) regions which is scattered on the outside were supplemented by adjacent fortress. Third, the north area of the Sila-captial showed the highest visible frequency generated by sum up the visibility from 3 fortresses. The northern captial is placed within 4km distance easy to support at the Myeonghwal and Seohyeong-sanseong. We proved that the Sila-capital had organized a solid surveillance system by 3 fortresses. Fourth, we could infer the practical process of fortress layout from comparing a cumulative visibility map. For the secure of visibility and defense systems, the fortress line would form a rising shape to the peak. This practical location theory can replace the vague common location theory that the fortress would constructed on two thirds of mountain height. It will be an empirical method in the ancient remains research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.195-202
• /
• 2006

The infiltration route analysis is a military application using geospatial information technology. The result of the analysis would present vulnerable routes for potential enemy infiltration. In order to find the susceptible routes, optimal path search algorithms (Dijkstra's and $A^*$) were used to minimize the cost function, summation of detection probability. The cost function was produced by capability of TOD (Thermal Observation Device), results of viewshed analysis using DEM (Digital Elevation Model) and two related geospatial information coverages (obstacle and vegetation) extracted from VITD (Vector product Interim Terrain Data). With respect to 50m by 50m cells, the individual cost was computed and recorded, and then the optimal infiltration routes was found while minimizing summation of the costs on the routes. The proposed algorithm was experimented in Daejeon region in South Korea. The test results show that Dijkstra's and $A^*$ algorithms do not present significant differences, but A* algorithm shows a better efficiency. This application can be used for both infiltration and surveillance. Using simulation of moving TOD, the most vulnerable routes can be detected for infiltration purpose. On the other hands, it can be inversely used for selection of the best locations of TOD. This is an example of powerful geospatial solution for military application.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.495-513
• /
• 2004

The shape of land surface work as a cradle for various environmental processes and human activities. As spatially distributed process modelings become increasing important in current research communities, a classification system that delineates land surface into characteristic geomorphological units is a pre-requisite for sustainable land use planning and management. Existing classification systems are either morphometric or generic, which have limitations to characterize continuous ecological processes over the landscape. A new classification system was developed to delineate the land surface into different geomorphological units from Digital Elevation Models(DEMs). This model assumes that there are pedo-geomorphological units in which distinct sets of hydrological, pedological, and consequent ecological processes occur. The classification system first divides the whole landsurface into eight soil-landscape units. Possible energy and material nows over the land surface were interpreted using a continuity equation of mass flow along the hillslope, and subsequently implemented in terrain analysis procedures. The developed models were tested at a 12$\textrm{km}^2$ area in Yangpyeong-gun, Kyeongi-do, Korea. The method proposed effectively delineates land surface into distinct pedo-geomorphological units, which identify the geomorphological characteristics over a large area at a low cost. The delineated landscape units mal provide a basic information for natural resource survey and environmental modeling practices.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.675-686
• /
• 2021

This study investigated the ground displacement occurring in a slope below a waste-rock dumping site and estimated the likelihood of a disaster due to a landslide. To start with, photogrammetry was conducted by unmanned aerial vehicles (UAVs) to investigate the size and extent of the ground displacement. From April 2019 to July 2020, the average error rate of the five UAV surveys was 0.011-0.034 m, and an elevation change of 2.97 m occurred due to the movement of the soil layer. Only some areas of the slope showedelevation change, and this was believed to be due to thegroundwater generated during rainfall rather than the effect of the waste-rock load at the top. Sensitivity analysis for LS-RAPID simulation was performed, and the simulation results were compared and analyzed by applying a digital elevation model (DEM) and a digital surface model (DSM)as terrain data with 10 m, 5 m, and 4 m grids. When data with high spatial resolution were used, the extent of the sedimentation of landslide material tended to be excessively expanded in the DEM. In contrast, in the result of applying a DSM, which reflects the topography in detail, the diffusion range was not significantly affected even when the spatial resolution was changed, and the sedimentation behavior according to the river shape could be accurately expressed. As a result, it was concluded that applying a DSM rather than a DEM does not significantly expand the sedimentation range, and results that reflect the site situation well can be obtained.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.84-96
• /
• 2008

This research investigated the landscape characteristics of the skyline and the cognitive characteristics of Mt. Mudeung (1,186m) from various viewpoints. Mt. Mudeung, the representative landscape of Gwangju City, has been recognized as a natural landmark and theme of paintings. By analyzing the perspective from 32 points with a digital terrain model, some landscape indices of the skyline were derived and the relationships are discussed. Assessment of the semantic differential scale with 21 adjective variables and representativeness to 15 landscape photographs of the mountain were accomplished. 1. Through regression analysis of the skyline indices, significant relationships were found between them the angle from the visual axis and number of skyline jumps, the vertical angle fluctuation and number of jumps per degree, the visual depth fluctuation and vertical angle fluctuation of skyline, and between the vertical angle mean and number of jumps per degree. Meaningful relations were found between the number of jumps of skyline to number of jumps per degree and the angle from visual axis to visual distance. However, in the representative assessment no difference was found on the angle from visual axis of viewpoints. On the other hand, it seemed to relate representativeness with visual clarity based on visual distance. 2. We found 4 factors "familiarity", "fluctuation of skylines", "openness", and "feeling of texture" in the results of factor analysis of semantic differential assessment. When considering the results of assessment for representativeness, adjective words for familiarity and openness seemed to have a close assessment. Specifically, the research showed that the landscape representation was highly assessed in a view which could be seen from the higher parts to the lower part of hills. This result indicates that the management of viewpoints which could get a scene from intermediate to distant, and locating a high elevation is important. 3. In the picturesque expression of Mt. Mudeung, various impressions from the different points, a skyline based on the top of Mt. Mudeung and a mono structure by overlapping hills were common characteristics. These common characteristics were also partially found through the analysis of topographical landscape indices and landscape images. Therefore, the viewpoints for the representative landscape management should be selected in natural or open spaces.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.143-153
• /
• 2005

Euiseong subbasin, included in the Kyungsang Basin, was created by the result of volcanic activity in the late Cretaceous, and contacts with Milyang and Youngyang subbasins by Palgongsan and Andong faults, respectively. In this study, geophysical survey is implemented fur investigating surface and subsurface geologic structure in Euiseong subbasin which composed with the complex of volcanic and plutonic rocks. To understand surface geologic feature, IRS satellite image and DEM(Digital Terrain Map) are used for analyzing lineament and its density. The numbers of lineaments show major trend in $N55^{\circ}\~65^{\circ}W$, and aspects of lineament lengths show major trend in $N55^{\circ}\~65^{\circ}W$ and N-S directions. 13 delineate subsurface density discontinuity; Power spectrum analysis was implemented for gravity anomaly data, resulting $4-5{\cal}km$ depth of basin basement and $0.5-0.6{\cal}km$ depth of shallow discontinuity. From the result of power spectrum analysis, 2.5-D modelings were implemented along two profiles of A-A' and B-B', and they show subsurface geology in detail. Analytic signal method for detecting boundaries of magnetic basements show 0.001-130 nT/m values, and high energy area show good correspondency with the boundaries of Palgongsan granite and caldera areas in Euiseong subbasin.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.55-70
• /
• 2021

In this study, in the field of remote sensing, where the scope of application is rapidly expanding to fields such as land monitoring, disaster prediction, facility safety inspection, and maintenance of cultural properties, monitoring of rural space and surrounding environment using UAV is utilized. It was carried out to verify the possibility, and the following main results were derived. First, the aerial image taken with an unmanned aerial vehicle had a much higher image size and spatial resolution than the aerial image provided by the National Geographic Information Service. It was suitable for analysis due to its high accuracy. Second, the more the number of photographed photos and the more complex the terrain features, the more the point cloud included in the aerial image taken with the UAV was extracted. As the amount of point cloud increases, accurate 3D mapping is possible, For accurate 3D mapping, it is judged that a point cloud acquisition method for difficult-to-photograph parts in the air is required. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. Fourth, the digital elevation model(DEM) produced with aerial image taken with an UAV can visually express the altitude and shape of the topography of the study site, so it can be used as data to predict the effects of topographical changes due to changes in rural space. Therefore, it is possible to utilize various results using the data included in the aerial image taken by the UAV. In this study, the superiority of images acquired by UAV was verified by comparison with existing images, and the effect of 3D mapping on rural space monitoring was visually analyzed. If various types of spatial data such as GIS analysis and topographic map production are collected and utilized using data that can be acquired by unmanned aerial vehicles, it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.