• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.38-47
• /
• 2024

PURPOSE. This study aims to evaluate the accuracy of different shade selection techniques and determine the matching success of crown restorations fabricated using digital shade selection techniques. MATERIALS AND METHODS. Teeth numbers 11 and 21 were prepared on a typodont model. For the #11 tooth, six different crowns were fabricated with randomly selected colors and set as the target crowns. The following four test groups were established: Group C, where the visual shade selection was performed using the Vita 3D Master Shade Guide and the group served as the control; Group Ph, where the shade selection was performed under the guidance of dental photography; Group S, where the shade selection was performed by measuring the target tooth color using a spectrophotometer; and Group I, where the shade selection was performed by scanning the test specimens and target crowns using an intraoral scanner. Based on the test groups, 24 crowns were fabricated using different shade selection techniques. The ΔE values were calculated according to the CIEDE2000 (2:1:1) formula. The collected data were analyzed by means of a one-way analysis of variance. RESULTS. For the four test groups (Groups C, Ph, S, and I), the following mean ΔE values were obtained: 2.74, 3.62, 2.13, and 3.5, respectively. No significant differences were found among the test groups. CONCLUSION. Although there was no statistically significant difference among the shade selection techniques, Group S had relatively lower ΔE values. Moreover, according to the test results, the spectrophotometer shade selection technique may provide more successful clinical results.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2001년도 추계심포지움 및 학술발표회:환경오염의 생체지표를 이용한 위해성 평가의 최근 기법
• /
• pp.91-91
• /
• 2001

• 정보보호학회지
• /
• 제4권2호
• /
• pp.74-99
• /
• 1994

ISO와 IEC가JTC1 을 만들기 이전인 1984년 'Digital Signature'를 만들기위한 과제가 시작되었다, 그후 3개의 과제로 세분되고 그중 첫번째의 과제로 본 문서가 가장 먼저 국제표준이 되었다. 1989년에 제목이 지금과 같이 바뀌었고, 1990년 DIS를 거쳐 1991년에 IS가 되었다. 1996년에 재검토될 예정이다.

• 한국지반공학회논문집
• /
• 제27권7호
• /
• pp.5-16
• /
• 2011

고체 역학 및 유체 역학 분야에서 대상 물체의 변형, 변위 및 속도를 측정하기 위하여 디지털 이미지 해석 기법이 개발, 사용되고 있다. 지반 공학에서도 흙을 포함한 지반 구조물의 변형을 관측하기 위하여 Particle Image Velocimetry (PIV)와 Digital Image Correlation (DIC) 기법이 실내 시험 및 모형 시험 등에 적용되기 시작하는 추세이다. 이미지 해석은 시료의 종류 및 크기, 카메라 해상도, 해석 범위, 이미지 해석 조건에 영향을 받으므로, 다양한 조건에서의 정밀도를 평가하여 합리적으로 최적 조건을 결정할 필요가 있다. 본 연구에서는 디지털 이미지 해석 결과에 영향을 미치는 다양한 요소를 정리하였다. 그리고 높은 정확도의 해석 결과를 얻을 수 있는 최적의 이미지 해석 조건을 결정하는 절차를 제안하였으며 최종적으로 제안된 절차의 적용성을 점성토 시료에 대하여 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.807-810
• /
• 1998

This paper presents BIST (Built-in self-test) techniques for detection of path delay faults in digital circuits. In the proosed BIST schemes, the shift registers make possible to concurrently generate and compact the latched test data. Therefore the test time is reduced efficiently. By reordering the elements of th shifte register based on the information of the hamming distance of each memory elements in CUt, it is possible to increase the number of path delay faults detected robustly/non-robustly. Experimental results for ISCAS'89 benchmark circuits show the efficiency of the proposed BIST techniques.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.592.2-592
• /
• 2001

The purpose of this study was to evaluate the efficiency of the four obturation techniques. In this study, eighty teeth were instrumented and randomly divided into 4 groups of 20 teeth each, according to the obturation techniques Group A was used with Microseal. in Group B, Thermafil. in Group C, continuous wave techniques, in Group D cold lateral condensation methods were used. After obturation, the teeth were taken a digital radiograph in mesiodistal and buccolingual directions to study the quality of the obturation.(omitted)

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.1-6
• /
• 2004

고체기반 조명인 LED를 적용시킨 건축조명 설계사례는 최근 수적으로 증가하고 있으나, 조명기구의 개발 및 설계적용기법은 새로운 광원에 적합하지 못한 경우가 많다. 본 논문에서는 디지털 기술로 제어되는 조명설계기법 관련 요소를 살펴보고, 디지털 광원 모듈을 개발하여 건축조명설계에 적용해봄으로써 센서와 연동되는 인터랙티브 라이팅 기법의 효용성을 검토하였다. 자연의 아날로그적 변화를 센서로 검출하여 연출하는 인터랙티브 라이팅은 디지털 기술이 조명대상공간을 획일화시킬 수 있다는 부정적 측면을 극복할 수 있는 하나의 새로운 대안이 된다 하겠다.

• 대한의용생체공학회:의공학회지
• /
• 제26권4호
• /
• pp.215-221
• /
• 2005

We describe the development of a prototype multi-channel electrical impedance tomography (EIT) system. The EIT system can be equipped with either a single-ended current source or a balanced current source. Each current source can inject current between any chosen pair of electrodes. In order to reduce the data acquisition time, we implemented multiple digital voltmeters simultaneously acquiring and demodulating voltage signals. Each voltmeter measures a differential voltage between a fixed pair of adjacent electrodes. All voltmeters are configured in a radially symmetric architecture to optimize the routing of wires and minimize cross-talks. To maximize the signal-to-noise ratio, we implemented techniques such as digital waveform generation, Howland current pump circuit with a generalized impedance converter, digital phase-sensitive demodulation, tri-axial cables with both grounded and driven shields, and others. The performance of the EIT system was evaluated in terms of common-mode rejection ratio, signal-to-noise ratio, and reciprocity error. Future design of a more innovative EIT system including battery operation, miniaturization, and wireless techniques is suggested.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.219-224
• /
• 2003

Recently, the number of the use of Digital Photogrammetry is increasing, the Digital Photogrammetry is used for the acquisition of images, remote sensing and three dimension location. Especially, the three dimension location is more activated to use digital camera for the Digital Photogrammetry. The reason is that it is cheap and easy to use and also it has high confidence. Using non-metric digital camera not metric camera, in this research, to get images and apply the images to the Direct Liner Transformation which is one of the techniques in Digital Photogrammetry to get three dimensional location of a point. Ⅰ programmed the procedure with Visual C++ to get the position of points speedly and I tested possibility whether it can analyze the displacement and the existence of structure with measurement system which is structured by a inexpensive non-metric digital camera.

• 대한기계학회논문집B
• /
• 제33권1호
• /
• pp.1-8
• /
• 2009

Recently microscale biofluid flows have been receiving large attention in various research areas. However, most conventional imaging techniques are unsatisfactory due to difficulties encountered in the visualization of microscale biological flows. Recent advances in optics and digital image processing techniques have made it possible to develop several advanced micro-PIV/PTV techniques. They can be used to get quantitative velocity field information of various biofluid flows from visualized images of tracer particles. In this paper, as new advanced micro-PIV techniques suitable for biofluid flow analysis, the basic principle and typical applications of the time-resolved micro-PIV and X-ray micro-PIV methods are explained. As a 3D velocity field measurement technique for measuring microscale flows, holographic micro-PTV method is introduced. These advanced PIV/PTV techniques can be used to reveal the basic physics of various microscale biological flows and will play an important role in visualizing veiled biofluid flow phenomena, for which conventional methods have many difficulties to analyze.