• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.52-53
• /
• 2017

Through the case study, we surveyed an applicability of digital fabrication in irregular-shaped building construction project. By digital fabrication, we mean is a precision manufacturing method has been used in aircraft, ship and car manufacturing industry. We collected construction-completed "LotteWorld Tower Podium" project data and analyzed its process in terms of construction quality andduration. The result shows that digital fabrication is considered a competitive technology that enabled to complete the project in seven months within 3mm surface curvature threshold. The digitalfabrication is expected to apply on a number of irregular-shaped building construction project.

• 콘크리트학회지
• /
• 제26권6호
• /
• pp.60-63
• /
• 2014

• 한국의류학회지
• /
• 제34권12호
• /
• pp.1968-1979
• /
• 2010

New technology that includes 3D body scanning, digital virtual human, and digital virtual garments has had a significant impact on the current apparel industry. Virtual simulation technology enables the visualization of a 3D virtual garment on a virtual avatar so that consumers can try on garments with their virtual avatars before purchasing. However, the manual virtual avatar provided for online apparel shopping currently has revealed limitations on the different body sizes and shapes of customers. This study analyzes the process of designing the automatic virtual avatar and the manual virtual avatar using OptiTex software; in addition, the study compares the practicality of the automatic virtual avatar with that of the manual virtual avatar. Data was examined by evaluating how much each virtual avatar is similar to the real body and how well it matched the needs of the current apparel industry. In the study, Avatar 1 was automatically created from three-dimensional body scan data and Avatar 2 was manually created from body measurements. The virtual avatar images laid over a real body image and the results were evaluated by comparing the simulated sizes of virtual avatars with those of a real body. Consequently, Avatar 1 was evaluated as more similar to the real body than Avatar 2 in all five body shapes. This study illustrates that an automatic virtual avatar might solve the fit problem that is the most common reason for a high return rate for online shopping. The results show that future virtual simulation technology needs to be improved for the practicality of the virtual avatars.

• 지구물리
• /
• 제9권1호
• /
• pp.7-19
• /
• 2006

Laser scanning is a new technology for obtaining Digital Surface Models(DSM) of the earth surface.It is a fast method for sampling the earth surface with high density and high point accuracy. This paper is for buildings extraction from LiDAR points data. The core part of building construction is based on a parameters filter for distinguishing between terrain and non-terrain laser points. The 3D geometrical properties of the building facades are obtained based on plane fitting using least-squares adjustment. The reconstruction part of the procedure is based on the adjacency among the roof facades. Primitive extraction and facade intersections are used for building reconstruction. For overcome the difficulty just reconstruct of laser points data used with digital camera images. Also, 3D buildings of city area reconstructed using digital map. Finally, In this paper show 3D building Modeling using digital map and LiDAR data.

• 대한디지털의료영상학회논문지
• /
• 제13권4호
• /
• pp.185-189
• /
• 2011

To assess the prevalence of various radiological reduction methods for childhood intussusception in training hospitals by means of a nationwide phone survey, and to demonstrate recent trends in this area by comparing the findings with those obtained in a survey conducted. $BaTiO_3$ system was prepared by using fabrication of classical conditioning ceramics. Polycrystalline and surface structure characteristics of the specimens were measured by X-ray diffraction, SEM(Scanning Electron Microscopy) and EDAX (Energy Dispersive Spectrometer), respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.241-245
• /
• 2007

The residual stress in axial stress in the axial direction of the steel filaments has been measured by using a method based on the combination of the focused ion beam (FIB) and high resolution strain mapping program (VIC-2D). That is, the residual stress was calculated from the measured displacement field before and after the introduction of a slot along the steel filaments. The displacement was obtained by the digital correlation analysis of high-resolution scanning electron micrographs, while the slot was introduced by FIB milling with low energy beam. The present measurement revealed that the residual stress within 8% of the magnitude was persistent in the steel filaments fabricated.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.383-388
• /
• 2004

The fusion of a different kind sensor is fusion of the obtained data by the respective independent technology. This is a important technology for the construction of 3D spatial information. particularly, information is variously realized by the fusion of LiDAR and mobile scanning system and digital map, fusion of LiDAR data and high resolution, LiDAR etc. This study is to generate union DEM and digital ortho image by the fusion of LiDAR data and high resolution image and monitor precisely topology, building, trees etc in urban areas using the union DEM and digital ortho image. using only the LiDAR data has some problems because it needs manual linearization and subjective reconstruction.

• 대한치과의사협회지
• /
• 제52권1호
• /
• pp.17-26
• /
• 2014

Computerized 3D virtual dental models are currently available, and their use has started to improve treatment outcomes. The accuracy of digital models has been demonstrated by many studies and various intra-oral scanners are innovated for short scanning time and high precision. Recently, a digital model was combined with a high technology computer-driven system, which was developed for the application of a digital set-up and indirect bonding of lingual attachments. In this section, virtual treatment planning using a virtual set-up program is be introduced, and the clinical applications and accuracy of computer-generated indirect bonding are discussed.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.27-32
• /
• 2019

We present an autofocus tracking system implemented by the digital refocusing of digital holographic microscopy (DHM) and the tunability of an electrically tunable lens (ETL). Once the defocusing distance of an image is calculated with the DHM, then the focal plane of the imaging system is optically tuned so that it always gives a well-focused image regardless of the object location. The accuracy of the focus is evaluated by calculating the contrast of refocused images. The DHM is performed in an off-axis holographic configuration, and the ETL performs the focal plane tuning. With this proposed system, we can easily track down the object drifting along the depth direction without using any physical scanning. In addition, the proposed system can simultaneously obtain the digital hologram and the optical image by using the RGB channels of a color camera. In our experiment, the digital hologram is obtained by using the red channel and the optical image is obtained by the blue channel of the same camera at the same time. This technique is expected to find a good application in the long-term imaging of various floating cells.

• 헤리티지:역사와 과학
• /
• 제57권1호
• /
• pp.82-108
• /
• 2024

고고 자료의 기록방식이 아날로그 기록에서 디지털로 전환되면서 3D 스캐닝 기술의 도입은 본격화되었다. 현재 3D스캔과 사진측량을 이용한 고고 자료의 디지털 기록에 대한 연구와 도입은 지속적으로 이루어지고 있다. 하지만 비용, 인력 문제 등으로 인해 대부분의 매장문화재 기관에서는 적극적인 디지털 기술의 도입을 주저하고 있다. 본고는 3D 스캔 방식 중 효율성이 가장 높다고 평가되는 사진측량 기술을 이용하여 오픈소스 소프트웨어를 활용한 유물의 디지털 실측 방법을 제시하고자 한다. 유물의 디지털 실측 절차는 크게 3D 모델 획득, 3D 모델 편집 및 입단면도 제작, 전자도면 작성의 세 단계로 이루어진다. 디지털 기술 적용의 접근성을 살펴보기 위해 전 과정은 오픈소스 소프트웨어만을 이용하였다. 연구 결과 정량적 평가에서 실제 유물과 3D 모델의 수치 데이터 간 계측의 편차가 크지 않았다. 또한, 오픈소스 소프트웨어와 상용 소프트웨어 간 정량적 품질 비교분석 결과 유사도가 높았다. 다만 데이터 처리시간은 상용 소프트웨어의 성능이 우위에 있었다. 이는 지속적인 알고리즘 개선으로 인한 연산속도 향상의 결과로 판단된다. 정성적 평가에서는 메시 및 텍스처 품질의 차이가 일부 발생하였다. 오픈소스 소프트웨어로 생성된 3D 모델은 메시표면에 노이즈가 다수 발생하거나 메시의 표면이 부드럽지 않고 유물의 제작흔, 문양의 표현을 확인하기 어려웠다. 하지만 일부 프로그램에서 정량적·정성적 평가에서 상용 소프트웨어에 견줄 만한 품질을 획득할 수 있었다. 3D 모델 편집을 위한 오픈소스 소프트웨어에서는 사진실측 결과물의 후처리, 정합, 병합뿐만 아니라 유물 실측에 필요한 스케일 조정, 입단면도 제작 및 이미지 렌더링까지 가능하였다. 이후 오픈소스 캐드 프로그램에서 트레이싱하여 최종 도면을 완성하였다. 고고학 연구에서 사진실측의 적용은 발굴과정부터 보고서 작성 그리고 3D 모델 데이터의 수치정보를 이용한 연구 등 활용 가능성이 매우 높다. 컴퓨터 비전의 획기적인 발전으로 오픈소스 소프트웨어의 종류도 다양해졌고 성능도 상당부분 개선된 것으로 확인되었다. 누구나 쉽게 디지털 기술의 적용이 가능한 현재 고고 자료의 3D 모델 데이터의 획득은 문화유산의 보존과 연구 활성화를 위한 기초자료로 활용될 수 있다.